Skip to content

Opto-Electrochemical Sensing Device Based on Long-Period Grating Coated with Boron-Doped Diamond Thin Film

MetadataDetails
Publication Date2015-12-25
JournalJournal of the Optical Society of Korea
AuthorsRobert Bogdanowicz, Michał Sobaszek, Mateusz Ficek, Marcin Gnyba, Jacek Ryl
InstitutionsGdańsk University of Technology, Université du Québec en Outaouais
Citations14
AnalysisFull AI Review Included
  • Core Innovation: Fabrication of a dual-function opto-electrochemical sensor integrating Long-Period Gratings (LPGs) with a Boron-Doped Nanocrystalline Diamond (B-NCD) thin film overlay on fused silica optical fibers.
  • Material Achievement: Deposition of homogenous, continuous B-NCD films (100-250 nm grain size) via Microwave Plasma Assisted CVD (MW PA CVD) at a low substrate temperature of 475 °C, preserving fiber integrity.
  • Optical Performance: The B-NCD overlay exhibits a high refractive index (n = 2.05 at λ = 550 nm) with low extinction coefficient, making it ideal for tuning cladding-mode resonance in LPGs.
  • Electrochemical Stability: Achieved a wide electrochemical window (up to 1.03 V) and fast redox kinetics (peak splitting < 500 mV) in 5 mM K3[Fe(CN)6] / 0.5 M Na2SO4.
  • Dual-Mode Sensing: Enables simultaneous refractive index sensing via spectral shifts and electrochemical analysis via cyclic voltammetry (CV) — a significant advance for biosensing and biochemical analysis.
  • Fabrication Rate: Stable deposition rate of 10 nm/min with films kept below 500 nm thickness, ensuring compatibility with optical fiber dimensions.
ParameterValueUnitContext
Substrate Temperature475°CHolder temperature during MW PA CVD deposition
Process Pressure50TorrMaintained during B-NCD film growth
Total Gas Flow Rate300sccmH2/CH4 mixture
Methane Molar Ratio4%[CH4]/[H2] concentration
Boron Doping Ratio5000ppm[B]/[C] ratio in gas phase
Deposition Time60minTotal growth cycle
Film Thickness< 500nmFinal B-NCD overlay thickness
Deposition Rate10nm/minAverage growth rate
Grain Size Range100-250nmMean crystallite dimension (nanocrystalline)
Refractive Index (n)2.05—Measured at λ = 550 nm via spectroscopic ellipsometry
Refractive Index (IR)~2.0—Near-IR spectral range
Diamond Raman Peak1324cm-1Shifted from 1330 cm-1 due to boron-induced stress
Electrochemical Window1.03VDetermined via CV in 5 mM K3[Fe(CN)6] / 0.5 M Na2SO4
Redox Peak Splitting (ΔEp)< 500mVReaction reversibility indicator
Scan Rate (CV)0.1V s-1Standard CV measurement rate
LPG Period (Λ)500µmArc-induced long-period grating spacing
Refractometer Accuracy± 10-4RIUReichert AR200 external RI calibration
Band Gap (Diamond)5.45eVWide band gap semiconductor property
  • Fiber Preparation: Corning SMF28 single-mode fibers with LPGs (Λ = 500 µm) were nucleated via dip-coating in a detonation nanodiamond (DND) / DMSO / PVA dispersion to enhance diamond adhesion on silica.
  • Diamond Deposition (MW PA CVD): B-NCD films grown in a SEKI Technotron reactor at 475 °C, 50 Torr, 300 sccm total flow, 4% CH4, and 5000 ppm [B]/[C].
  • Morphological Characterization: Hitachi S-3400N SEM used for cross-sectional and surface imaging of fiber coatings.
  • Compositional Analysis: Raman spectroscopy (Horiba LabRAM ARAMIS) confirmed high sp3 content and detected boron signatures at 1226 cm-1.
  • Optical Characterization: Spectroscopic ellipsometry (Horiba Jobin-Yvon UVISEL) on Si reference samples to extract n(λ) and k(λ) dispersion.
  • Electrochemical Testing: Three-electrode CV setup (B-NCD-coated fiber working electrode, Ag/AgCl reference, Pt counter) in aqueous redox couple at 0.1 V s-1.
  • LPG Spectral Analysis: Transmission measured (1150-1650 nm) using Yokogawa AQ4305 source and AQ6370B optical spectrum analyzer; samples immersed in water-glycerin mixtures for RI sensitivity tests.

The opto-electrochemical sensor demonstrated in this work requires diamond films with strict control over boron doping levels, nanocrystalline grain morphology, and optical transparency — all areas where 6CCVD’s MPCVD expertise excels.

  • Applicable Materials:

    • Heavy Boron-Doped PCD: Ideal for replicating the conductive B-NCD electrodes used here. Our polycrystalline diamond films provide the necessary electrochemical window and p-type semiconducting behavior.
    • Optical-Grade Nanocrystalline Diamond (NCD): Directly applicable for the high-refractive-index overlays (n ≈ 2.05) needed to tune LPG resonance sensitivity.
    • Boron-Doped Diamond (BDD) Wafers: Available in custom dimensions for hybrid fiber-optic / electrochemical sensor arrays.
  • Customization Potential:

    • The paper relies on sub-500 nm films grown at 475 °C — within 6CCVD’s low-thermal-budget deposition window to protect temperature-sensitive substrates like fused silica fibers.
    • For integrated sensor packages, we offer custom metalization (Ti, Pt, Au, Pd, W, Cu) to create patterned electrode contacts on diamond-coated fibers or planar BDD electrodes.
    • Laser cutting and dicing services enable precision shaping of diamond-coated fiber tips or microelectrode geometries.
  • Engineering Support:

    • 6CCVD’s in-house PhD engineering team can assist with material selection, doping concentration optimization (analogous to the 5000 ppm [B]/[C] used here), and film thickness calibration for LPG-overlay or electrochemical sensing projects.
    • We support scale-up from laboratory proof-of-concept (single fiber coatings) to wafer-level production for biosensor and environmental monitoring applications.
  • Call to Action: For custom specifications, boron-doping consultation, or material selection for fiber-integrated diamond devices, visit 6ccvd.com or contact our engineering team directly.

View Original Abstract

The fabrication process of thin boron-doped nanocrystalline diamond (B-NCD) microelectrodes on fused silica single mode optical fiber cladding has been investigated. The B-NCD films were deposited on the fibers using Microwave Plasma Assisted Chemical Vapor Deposition (MW PA CVD) at glass substrate temperature of 475 ℃. We have obtained homogenous, continuous and polycrystalline surface morphology with high sp3 content in B-NCD films and mean grain size in the range of 100-250 nm. The films deposited on the glass reference samples exhibit high refractive index (n=2.05 at λ=550 nm) and low extinction coefficient. Furthermore, cyclic voltammograms (CV) were recorded to determine the electrochemical window and reaction reversibility at the B-NCD fiber-based electrode. CV measurements in aqueous media consisting of 5 mM K3[Fe(CN)6] in 0.5 M Na2SO4 demonstrated a width of the electrochemical window up to 1.03 V and relatively fast kinetics expressed by a redox peak splitting below 500 mV. Moreover, thanks to high-n B-NCD overlay, the coated fibers can be also used for enhancing the sensitivity of long-period gratings (LPGs) induced in the fiber. The LPG is capable of measuring variations in refractive index of the surrounding liquid by tracing the shift in resonance appearing in the transmitted spectrum. Possible combined CV and LPG-based measurements are discussed in this work.