Skip to content

Single Crystal Diamond Needle as Point Electron Source

MetadataDetails
Publication Date2016-10-12
JournalScientific Reports
AuthorsVictor I. Kleshch, Stephen T. Purcell, A. N. Obraztsov
InstitutionsInstitut Lumière Matière, Lomonosov Moscow State University
Citations35
AnalysisFull AI Review Included
  • Breakthrough in Cold Cathode Emitters: First-ever demonstration of single-crystal diamond (SCD) needles functioning as point electron sources, overcoming historical limitations of bulk transport in intrinsic diamond.
  • Material Synthesis: Needles were fabricated via selective thermal oxidation of polycrystalline CVD diamond films, yielding high aspect-ratio single crystals (DN1: 55 µm length, 0.85 µm max width; DN2: 100 µm length, 3 µm max width; apexes < 50 nm).
  • Stable Emission Performance: Achieved highly stable field emission (FE) currents up to 1 µA in ultrahigh vacuum (UHV), with no hysteresis across voltage cycles.
  • Conduction Mechanism Identified: Electron transport is governed by Poole-Frenkel (PF) emission along the diamond surface, with a characteristic trap energy of 0.2-0.3 eV.
  • Temperature Sensitivity: Emission current increases by two orders of magnitude when heated from 300 K to 900 K, with activation energies of 0.26 eV (DN1) and 0.18 eV (DN2) at 700 V.
  • Current Saturation Phenomenon: Exhibits a “saturation” region (Region II) in I-V curves deviating from standard Fowler-Nordheim (FN) behavior, consistent with semiconductor FE theory involving depletion zone formation.
  • Application Potential: Highly suitable for temperature-sensitive point electron beam sources, vacuum microelectronics, and robust sensor platforms.

<table> <thead> <tr> <th>Parameter</th> <th>Value</th> <th>Unit</th> <th>Context</th> </tr> </thead> <tbody> <tr> <td>Needle Length (DN1 / DN2)</td> <td>55 / 100</td> <td>µm</td> <td>Physical dimension of SCD emitter</td> </tr> <tr> <td>Max Needle Width (DN1 / DN2)</td> <td>0.85 / 3.0</td> <td>µm</td> <td>Physical dimension of SCD emitter</td> </tr> <tr> <td>Apex Diameter</td> <td>&lt; 50</td> <td>nm</td> <td>Field emission tip radius</td> </tr> <tr> <td>Extraction Voltage Range</td> <td>0 - 1400</td> <td>V</td> <td>Applied field emission voltage</td> </tr> <tr> <td>Maximum Stable Current</td> <td>1</td> <td>µA</td> <td>Sustained emission in UHV</td> </tr> <tr> <td>Operating Temperature</td> <td>300 - 900</td> <td>K</td> <td>In situ heating range</td> </tr> <tr> <td>Preliminary Heat Treatment</td> <td>900 K for 30</td> <td>sec</td> <td>Surface adsorbate removal</td> </tr> <tr> <td>Activation Energy Ea (DN1)</td> <td>0.26</td> <td>eV</td> <td>Arrhenius slope at 700 V</td> </tr> <tr> <td>Activation Energy Ea (DN2)</td> <td>0.18</td> <td>eV</td> <td>Arrhenius slope at 700 V</td> </tr> <tr> <td>Total ΔEa across Region II</td> <td>~ 0.01</td> <td>eV</td> <td>Energy variation end-to-start of Region II</td> </tr> <tr> <td>Maximum Voltage Drop ΔV</td> <td>~ 700</td> <td>V</td> <td>Internal drop at end of Region II</td> </tr> <tr> <td>Trap Energy (Poole-Frenkel)</td> <td>0.2 - 0.3</td> <td>eV</td> <td>Characteristic bulk/surface trap level</td> </tr> <tr> <td>Current-Temperature Sensitivity</td> <td>2 orders of magnitude</td> <td>—</td> <td>Increase from 300 K to 900 K</td> </tr> </tbody> </table>

  • Substrate Preparation: Polycrystalline CVD diamond films deposited on substrate material (likely Si, given Si diffusion noted as a possible dopant).
  • Needle Formation via Selective Oxidation: Thermal oxidation of polycrystalline CVD diamond preferentially etches grain boundaries, leaving behind isolated single-crystal diamond needles with high aspect ratios.
  • Mounting: Individual needles (DN1, DN2) mounted on tungsten tips using nickel tube holders for UHV compatibility.
  • UHV Chamber Conditioning: System baked and evacuated to ultrahigh vacuum; needles pre-heated to 900 K for 30 sec to desorb volatile surface contaminants.
  • Field Emission Measurement: FE current I and voltage drop ΔV recorded as functions of extraction voltage V (0-1400 V) and temperature T (300-900 K).
  • Electron Energy Analysis: Total electron energy distribution (TED) measured simultaneously using an in-line electron energy analyzer to determine Fermi-level shifts and internal voltage drops.
  • Transport Mechanism Fitting: I(ΔV) data fitted to Poole-Frenkel (PF), Space-Charge-Limited (SCL), and VRH (Variable Range Hopping) models to identify dominant conduction regime.
  • Applicable Materials:

    • This research requires Optical Grade Single Crystal Diamond (SCD) to preserve bulk diamond properties (high thermal conductivity, chemical inertness, mechanical stability) while enabling low positive or negative electron affinity at the apex.
    • For experiments requiring higher conductivity alongside SCD structure, Boron-Doped SCD or Heavy Boron-Doped PCD substrates can be supplied to tune carrier supply and study the transition between intrinsic and doped regimes.
    • For comparative polycrystalline emitter studies, Optical Grade Polycrystalline Diamond (PCD) wafers and free-standing films are available as starting material for the selective oxidation process.
  • Customization Potential:

    • 6CCVD produces free-standing SCD and PCD plates up to 125 mm with thicknesses from 0.1 µm to 500 µm, enabling direct CVD growth on substrates suitable for subsequent needle-formation etching protocols.
    • For devices requiring metallic extraction anodes or integrated heater stages, 6CCVD’s in-house metalization capabilities (Ti, W, Pt, Au, Pd, Cu) allow tailored contact geometries.
    • Laser cutting and shaping services are available to pre-form CVD diamond into geometries optimized for selective oxidation and tip-yield maximization.
  • Engineering Support:

    • 6CCVD’s in-house PhD engineering team can assist with material selection for vacuum microelectronics, field emission cathodes, and electron point source projects, including guidance on intrinsic vs. lightly doped SCD for optimized Poole-Frenkel transport regimes.
    • Consultation is available on substrate choice (Si vs. alternative CVD-compatible materials) to control unintentional Si/N doping levels that govern trap energies in the 0.2-0.3 eV range.
  • Call to Action: For custom specifications, tailored doping concentrations, or material consultation on field emission and vacuum electronic diamond applications, visit 6ccvd.com or contact our engineering team directly.

View Original Abstract

Diamond has been considered to be one of the most attractive materials for cold-cathode applications during past two decades. However, its real application is hampered by the necessity to provide appropriate amount and transport of electrons to emitter surface which is usually achieved by using nanometer size or highly defective crystallites having much lower physical characteristics than the ideal diamond. Here, for the first time the use of single crystal diamond emitter with high aspect ratio as a point electron source is reported. Single crystal diamond needles were obtained by selective oxidation of polycrystalline diamond films produced by plasma enhanced chemical vapor deposition. Field emission currents and total electron energy distributions were measured for individual diamond needles as functions of extraction voltage and temperature. The needles demonstrate current saturation phenomenon and sensitivity of emission to temperature. The analysis of the voltage drops measured via electron energy analyzer shows that the conduction is provided by the surface of the diamond needles and is governed by Poole-Frenkel transport mechanism with characteristic trap energy of 0.2-0.3 eV. The temperature-sensitive FE characteristics of the diamond needles are of great interest for production of the point electron beam sources and sensors for vacuum electronics.