Skip to content

Green synthesis, characterization, and electrochemical behavior of gold nanoparticles on boron-doped diamond electrode

MetadataDetails
Publication Date2018-01-10
JournalActa Chimica Asiana
AuthorsWiyogo Prio Wicaksono, Aushofin Hamidah
InstitutionsIslamic University of Indonesia
Citations3
AnalysisFull AI Review Included

Green Synthesis of AuNPs on Boron-Doped Diamond Electrode

Section titled “Green Synthesis of AuNPs on Boron-Doped Diamond Electrode”
  • Core Objective: Green synthesis of gold nanoparticles (AuNPs) using Piper betle leaf extract (PBLE) and electrochemical characterization on a Boron-Doped Diamond (BDD) electrode.
  • Synthesis Method: Single-step bioreduction using PBLE as the simultaneous reducing and stabilizing agent, eliminating toxic chemical reducing agents.
  • Nanoparticle Characteristics: Confirmed via UV-Vis spectroscopy, exhibiting a characteristic Surface Plasmon Resonance (SPR) peak at 545 nm and a hydrodynamic diameter of ~100 nm via Particle Size Analyzer (PSA).
  • Electrochemical Performance: Cyclic Voltammetry (CV) tested across four electrolytes; the best defined oxidation and reduction peaks occurred in HCl 0.1 M at 0.93 V and 0.68 V respectively (vs. Ag/AgCl).
  • Target Application: Label in electrochemical immunochromatographic strip tests for quantitative sensing.
  • Key Conclusion: Green-synthesized AuNPs show electrochemical behavior equivalent to chemically synthesized AuNPs, confirming PBLE as a viable, eco-friendly alternative for sensing platforms.
ParameterValueUnitContext
SPR Peak (AuNPs)545nmUV-Vis confirmation of AuNP formation
Particle Diameter~100nmMeasured via Particle Size Analyzer (DLS)
CV Scan Rate100mV/sApplied for all cyclic voltammetry measurements
Oxidation Peak Potential (HCl)0.93V vs. Ag/AgClAuNPs in HCl 0.1 M
Reduction Peak Potential (HCl)0.68V vs. Ag/AgClAuNPs in HCl 0.1 M
Electrolyte Condition A0.1MHCl (best-defined peaks)
Electrolyte Condition B0.1MNaCl
Electrolyte Condition C0.1MPhosphate Buffer (pH 7)
Electrolyte Condition D0.1MNaOH
Precursor SaltHAuCl4—Chloroauric acid (Wako Pure Chemical)
Potential Window Tested-0.2 to 1.4VCathodic and anodic limits during CV
  • Preparation of Reducing Agent: Aqueous extraction of Piper betle leaf (PBLE) to isolate antioxidant and flavonoid compounds capable of reducing Au3+ to Au0.
  • Single-Step Bioreduction Synthesis: Mixing PBLE with HAuCl4 precursor solution at room temperature; flavonoids serve as the reducing and capping agent.
  • Optical Characterization: UV-Vis spectroscopy scanning across 350 to 750 nm to track the emergence of the SPR band.
  • Physical Characterization: Particle Size Analyzer (PSA/DLS) to confirm hydrodynamic size distribution between 0.1 nm and 10,000 nm range.
  • Electrode Interface: AuNPs deposited/evaluated on a Boron-Doped Diamond (BDD) working electrode.
  • Electrochemical Testing: Cyclic Voltammetry (CV) conducted in four distinct 0.1 M supporting electrolytes to evaluate redox behavior.
  • Reference Electrode: All potentials measured against an Ag/AgCl reference electrode.

For replicating or extending this electrochemical nanoparticulate sensing research, the following 6CCVD materials are ideal:

  • Boron-Doped Diamond (BDD) — Electrochemical Grade: The BDD electrode is the cornerstone of this work. 6CCVD’s heavy boron-doped PCD or high-quality BDD thin films provide the wide electrochemical potential window, low background current, and chemical inertness required for sensitive AuNP detection and stripping voltammetry.
  • Single Crystal Diamond (SCD) — Optical Grade: Useful for UV-Vis plasmonic studies or integrated optical-electrochemical platforms requiring ultra-low surface roughness (Ra < 1 nm).
  • Custom Metalization: AuNPs are highly sensitive to substrate interface properties. 6CCVD provides internal Au, Pt, Pd, Ti, W, and Cu metallization, enabling tailored Ohmic or Schottky contacts for advanced electrochemical cell architectures.
  • Tailored Boron Doping Levels: Reproducible boron concentration (light to heavy doping) directly controls conductivity and the electrochemical window. 6CCVD can tune doping profiles to optimize sensitivity for specific targets such as melamine or other analytes relevant to immunochromatographic strip tests.
  • Geometric Flexibility: Electrode dimensions, shapes (rectangular plates, circular wafers), and thickness (0.1 µm to 500 µm for SCD/PCD; up to 10 mm for substrates) can be specified to fit custom flow cells or microarray formats.
  • Precision Laser Cutting: Achieves fine features required for multi-electrode or microarray geometries essential in strip-test sensor development.
  • 6CCVD’s in-house PhD engineering team can collaborate on material selection for electrochemical biosensors, nanoparticle detection platforms, and green-chemistry-driven sensor architectures.
  • Consultation is available on integrating high-quality BDD films with compatible metal interconnects to enhance anodic stripping voltammetry (ASV) performance.

For custom specifications, tailored boron-doping concentrations, or material consultation on BDD-enabled sensing platforms, visit 6ccvd.com or contact our engineering team directly. Global shipping (DDU default, DDP available) ensures rapid delivery to research facilities worldwide.

View Original Abstract

Gold nanoparticles (AuNPs) have been successfully synthesized through a single-step bioreduction method using Piper betle leaf extract (PBLE) as a green reducing and stabilizing agent. Their formation was confirmed by UV-Visible spectroscopy, resulted in a characteristic Surface Plasmon Resonance (SPR) peak at 545 nm, whereas there is no peak observed in the extract. By using Particle Size Analyzer (PSA), it has been characterized that they have a ~100 nm diameter. For characterizing electrochemical behavior, the cyclic voltammetry technique was applied in a various range of electrolyte condition (HCl 0.1M, NaCl 0.1M, phosphate buffer 0.1M pH 7, and NaOH 0.1M). The best oxidation and reduction peak of the AuNPs were obtained in HCl at 0.93 V and 0.68 V, respectively. This green synthesized AuNPs could be applied as a label in immunochromatographic strip tests for various sensing applications.