Skip to content

Preparation and characterization of TiO2/carbon nanowall composite on a transparent substrate

MetadataDetails
Publication Date2018-06-30
JournalPhotonics Letters of Poland
AuthorsMattia Pierpaoli, Aneta Lewkowicz, Mateusz Ficek, Maria Letizia Ruello, Robert Bogdanowicz
InstitutionsGdańsk University of Technology, Marche Polytechnic University
Citations4
AnalysisFull AI Review Included
  • Composite Fabrication: Demonstrated a transparent B-CNW/TiO2 composite by combining Boron-Doped Carbon Nanowalls with a sol-gel derived titanium dioxide overlayer for enhanced photocatalytic activity.
  • Substrate Innovation: Successfully grown carbon nanostructures directly onto optical-grade quartz glass using a Microwave Plasma-Enhanced Chemical Vapor Deposition (MPCVD) process, bypassing traditional silicon limitations.
  • Process Control: Validated the ability to tune optical transmittance and electrical conductivity by varying the B-CNW deposition time (7.5, 15, and 30 minutes), demonstrating robust thickness engineering.
  • Optical & Electronic Tuning: Achieved precise control over the refractive index (n) and extinction coefficient (k) across the UV-VIS spectrum (300-1000 nm), alongside bandgap modulation.
  • Structural Integrity: Confirmed four-layer structural modeling (ambient/surface roughness/B-CNW/glass substrate) via spectroscopic ellipsometry for accurate thickness determination.
  • Surface Functionality: Highlighted the large surface-to-volume ratio and field emission properties of the CNWs as an ideal support architecture for photocatalysts like TiO2.
  • High-Temperature Compatibility: The resulting composite withstands post-processing annealing at 450 °C for 5 hours, maintaining optical functionality for photocatalytic deployment.
ParameterValueUnitContext
Substrate MaterialOptical-Grade Quartz / Fused Silica—Transparent support for photocatalyst
Precursor GasesH2, CH4, N2—Gas mixture for B-CNW growth
Total Gas Flow328sccmProcess flow rate
Process Pressure50TorrChamber pressure during CVD
Microwave Power (Growth)1300WPlasma power during deposition
Microwave Power (Etching)1000WPlasma power during pre-etch
Microwave Frequency2.45GHzRadiation frequency
Deposition Times7.5, 15, 30minutesVariable parameter for thickness study
Pre-treatment EtchantH2—20-minute substrate etching
Pre-treatment Temperature500°CSubstrate temperature during etching
Substrate Holder HeatingInduction Heater—With thermocouple control
TiO2 PrecursorTitanium(IV) tetra(2-propanolate)—Sol-gel precursor
Solvents/AdditivesPropan-2-ol, Triton X-100, HCl (37%)—Sol-gel formulation components
Annealing Temperature450°CPost-deposition TiO2 calcination
Annealing Duration5hoursTime in air atmosphere
Spectroscopic Range1.8 - 4.8eVEllipsometry measurement range
Wavelength Range300 - 1000nmUV-VIS spectroscopy range
Incidence Angle60°Ellipsometry angle of incidence
Raman Spectral Range200 - 3500cm-1Confocal micro-Raman range
Excitation SourceHeNe Laser—Raman spectroscopy source
  • Substrate Preparation: Begin with optical-grade quartz or fused silica substrates. Perform a preliminary H2 plasma etch for 20 minutes at 500 °C with 1000 W microwave power to prepare the surface.
  • Seeding Process: Apply a nanodiamond slurry spin-coating technique to seed the transparent substrates prior to CVD growth.
  • B-CNW Deposition (MPCVD): Utilize a gas mixture of H2, CH4, and N2 (total flow 328 sccm). Maintain chamber pressure at 50 Torr and apply 1300 W of 2.45 GHz microwave power. Heat the substrate via an induction heater with thermocouple control. Adjust deposition time (7.5 to 30 minutes) to engineer thickness and optical properties.
  • Sol-Gel Preparation: Formulate the TiO2 precursor solution using titanium(IV) tetra(2-propanolate), propan-2-ol, Triton X-100, and 37% hydrochloric acid.
  • Composite Formation: Spin-coat the TiO2 sol-gel directly onto the B-CNW substrate.
  • Annealing: Calcine the composite in air at 450 °C for 5 hours to crystallize the TiO2 layer.
  • Characterization: Analyze samples using Raman spectroscopy (200-3500 cm-1), spectroscopic ellipsometry (1.8-4.8 eV), and UV-VIS spectroscopy (300-1000 nm).
  • Applicable Materials: To replicate or extend the photocatalytic and transparent electrode research detailed in this paper, Optical-Grade SCD (Single Crystal Diamond) is required for the seeding process, while Heavy Boron-Doped PCD (Polycrystalline Diamond) or tailored carbon nanowall architectures are necessary for the conductive layer. 6CCVD manufactures these materials with precise control over dopant concentration to match the electrical conductivity requirements of the B-CNW matrix.
  • Custom Dimensions & Scaling: The paper utilized small quartz substrates for initial characterization. 6CCVD provides MPCVD diamond deposition on plates and wafers up to 125 mm, enabling direct scaling of this photocatalytic composite technology for larger-area transparent electrodes and industrial water treatment or air purification systems.
  • Metalization & Integration: For applications requiring the B-CNW/TiO2 composite to interface with external circuitry (such as the conductive transparent electrodes mentioned by the authors), 6CCVD offers in-house custom metalization services. We can deposit Au, Pt, Pd, Ti, W, and Cu with sub-micron precision to ensure optimal electrical contact without compromising the optical transparency of the quartz substrate.
  • Laser Cutting & Structuring: 6CCVD provides precision laser cutting and structuring to pattern diamond and composite materials into specific geometries, allowing for the fabrication of bespoke photocatalytic reactor components or electrode arrays tailored to specific experimental setups.
  • Surface Engineering: Achieving the large surface-to-volume ratio noted in the paper requires expert surface preparation. 6CCVD’s polishing capabilities—achieving Ra < 1 nm on SCD and < 5 nm on inch-size PCD—ensure the highest quality base materials for subsequent nanowall growth and TiO2 deposition.
  • Engineering Support: Navigating the complexities of boron-doping levels, plasma parameters, and thermal budgets requires deep materials expertise. 6CCVD’s in-house PhD engineering team is available to provide material consultation for similar photocatalysis, optoelectronics, and sensor projects, helping you optimize the balance between optical transmittance and electrical conductivity.
  • Call to Action: For custom specifications, specialized boron-doping profiles, or material consultation regarding your next-generation photocatalytic or transparent electrode project, visit 6ccvd.com or contact our engineering team directly.
View Original Abstract

A transparent titanium dioxide and carbon nanowall composite (B-CNW/TiO2) material was fabricated by growing boron-doped carbon nanowalls (B-CNWs) on quartz glass with microwave plasma-enhanced chemical vapor deposition technique, followed by sol-gel deposition using titanium isopropoxide as a TiO2 precursor. Different layer thicknesses were fabricated. Samples were investigated by spectroscopic ellipsometry and UV-VIS spectroscopy. Results shows how the B-CNW thickness affects the optical transmittance, bandgap and electrical conductivity. Full Text: PDF ReferencesWang, H., Quan, X., Yu, H. & Chen, S. Fabrication of a TiO2/carbon nanowall heterojunction and its photocatalytic ability. Carbon N. Y. 46, 1126-1132 (2008). CrossRef Fujishima, A., Zhang, X. & Tryk, D. A. TiO2 photocatalysis and related surface phenomena. Surf. Sci. Rep. 63, 515-582 (2008). CrossRef Pierpaoli, M., Giosuè, C., Ruello, M. L. & Fava, G. Appraisal of a hybrid air cleaning process. Environ. Sci. Pollut. Res. 24, 12638-12645 (2017). CrossRef Sobaszek, M. et al. Diamond Phase (sp3-C) Rich Boron-Doped Carbon Nanowalls (sp2-C): Physicochemical and Electrochemical Properties. J. Phys. Chem. C 121, 20821-20833 (2017). CrossRef Lewkowicz, A. et al. Thickness and structure change of titanium(IV) oxide thin films synthesized by the sol-gel spin coating method. Opt. Mater. (Amst). 36, 1739-1744 (2014). CrossRef Tauc, J. Optical properties and electronic structure of amorphous Ge and Si. Mater. Res. Bull. 3, 37-46 (1968). CrossRef