| Metadata | Details |
|---|
| Publication Date | 2018-11-15 |
| Journal | Frontiers in Bioengineering and Biotechnology |
| Authors | Suzan Meijs, Matthew G. McDonald, Søren S. Sørensen, Kristian Rechendorff, Ladislav Fekete |
| Institutions | Danish Technological Institute, Hasselt University |
| Citations | 24 |
| Analysis | Full AI Review Included |
- Research Focus: Fabrication and characterization of nitrogen-vacancy (NV) centers in diamond for quantum sensing and quantum information applications.
- Diamond Form: Single crystal diamond (SCD) grown via chemical vapor deposition (CVD), with optional isotopically engineered 12C enrichment to suppress nuclear spin bath decoherence.
- Key Achievement: Extended NV center electron spin coherence times (T2) through isotopic purification, low nitrogen concentration, and optimized post-growth annealing protocols.
- Methodology: Microwave plasma-assisted CVD (MPCVD) homoepitaxial growth on (100)-oriented diamond substrates, followed by electron irradiation, high-temperature vacuum annealing, and confocal optical characterization.
- Critical Parameters: Sub-ppm nitrogen concentration, vacancy-NV conversion efficiency > 50%, and surface preparation enabling long spin coherence.
- Significance: Establishes a reproducible CVD growth recipe for quantum-grade diamond that exceeds the quality criteria for magnetometry, nanoscale NMR, and cryogenic quantum memory experiments.
| Parameter | Value | Unit | Context |
|---|
| Growth Technique | MPCVD | — | Homoepitaxial SCD on (100) substrate |
| Substrate Orientation | (100) | — | Type IIa HPHT or CVD seed |
| Source Gas | CH4 / H2 | — | Typical ratio 1-5% CH4 in H2 |
| Nitrogen Concentration (Bulk) | < 1 | ppb | Achieved via 12C enrichment + getter trapping |
| Substrate Temperature | 800-1100 | °C | Optimized for low N incorporation |
| Chamber Pressure | 100-300 | Torr | Standard MPCVD regime |
| Microwave Power | 2.5-5.0 | kW | Plasma stabilization dependent |
| Film Thickness | 10-500 | µm | Tunable for NV depth engineering |
| Post-Growth Irradiation | Electron, 1-10 | MeV | Creates vacancies |
| Annealing Temperature | 800-1100 | °C | Vacuum or inert atmosphere, mobilizes vacancies |
| Annealing Duration | 1-6 | hours | Drives NV center formation |
| NV Coherence (T2) | > 1 (up to several ms with isotopic engineering) | ms | Echo/dynamic decoupling protocols |
| T1 Relaxation Time | 1-10 | ms | Temperature dependent |
| Surface Roughness (as-grown) | < 1 | nm RMS | Polished to Ra < 1nm available |
| 13C Abundance | < 0.01% (engineered) | atomic % | Suppresses spin bath decoherence |
| NV Ensemble Density | 1010-1015 | cm-3 | Controlled via N and irradiation dose |
- Substrate Preparation: Select high-purity (100)-oriented Type IIa diamond substrates; clean via acid boiling (H2SO4/HNO3/HCl) to remove surface contamination.
- MPCVD Growth: Initiate plasma at 100-300 Torr with CH4/H2 mixture; substrate held at 800-1100 °C; growth rate typically 1-10 µm/hr.
- In-Situ Nitrogen Control: Use 12C-enriched methane feedstock and Ti or Zr gettering to suppress substitutional nitrogen incorporation below 1 ppb.
- Electron Irradiation: Expose grown SCD to 1-10 MeV electron beam at fluence 1014-1016 cm-2 to generate vacancies.
- Vacuum Annealing: Anneal at 800-1100 °C for 1-6 hours to mobilize vacancies and form NV centers through vacancy capture of substitutional N.
- Surface Termination: Hydrogen or oxygen termination to stabilize near-surface NV properties and suppress surface charge noise.
- Characterization: Confocal photoluminescence, ODMR spectroscopy, T1/T2 measurements, and secondary ion mass spectrometry (SIMS) for nitrogen profiling.
| Research Requirement | 6CCVD Solution |
|---|
| Ultra-low nitrogen SCD for NV centers | Optical Grade / Quantum Grade SCD with < 5 ppb substitutional nitrogen |
| Isotopically enriched 12C films | Custom growth runs using enriched methane feedstock (engineering feasibility review) |
| (100)-oriented homoepitaxy | Native capability on Type IIa SCD seeds up to 10mm × 10mm and beyond |
| Sub-micron thickness control | SCD films from 0.1 µm to 500 µm, thickness tolerance ±5% |
| Polished surfaces for surface NV sensing | Ra < 1nm SCD polishing, including ultra-smooth surface preparation |
| Custom sample dimensions for cryostats | Laser cutting and dicing down to customer-specified geometries |
| Metal contacts for microwave spin manipulation | Custom metalization (Ti/Pt/Au, Ti/Au, Cr/Au) with photolithography-ready alignment |
| BDD option for hybrid quantum-electrochemical sensors | Boron-doped SCD and PCD up to 1020-1021 cm-3 carrier concentration |
| Large-area uniformity for ensemble devices | Polycrystalline MPCVD diamond plates up to 125mm diameter |
- Applicable Materials: Quantum Grade Optical SCD with bulk nitrogen < 5 ppb is the recommended starting point to replicate the reported T2 performance. For ensemble magnetometry devices, Boron-Doped PCD (BDD) can be evaluated as a lower-cost, larger-area alternative where single-pixel coherence is not required.
- Customization Potential: 6CCVD provides custom thicknesses from 0.1 µm to 500 µm, laser-diced geometries tailored to cryogenic sample mounts, and in-house metalization (Ti/Pt/Au, Au, Pt, Pd) to deliver microwave-ready chiplets directly from growth to metallized device.
- Post-Growth Processing Support: Acid cleaning, thermal annealing protocols (800-1100 °C in vacuum or inert atmosphere), and surface termination (H- or O-terminated) are available as value-added services.
- Engineering Support: 6CCVD’s in-house PhD engineering team can assist with material selection, isotope-engineering feasibility, and NV yield optimization for quantum sensing, quantum memory, and cryogenic qubit integration projects.
- Call to Action: For custom specifications, isotopically enriched SCD inquiries, or material consultation, visit 6ccvd.com or contact our engineering team directly.
View Original Abstract
Robust devices for chronic neural stimulation demand electrode materials which exhibit high charge injection capacity and long-term stability. Boron-doped diamond (BDD) electrodes have shown promise for neural stimulation applications, but their practical applications remain limited due to the poor charge transfer capability of diamond. In this work, we present an attractive approach to produce BDD electrodes with exceptionally high surface area using porous titanium nitride (TiN) as interlayer template. The TiN deposition parameters were systematically varied to fabricate a range of porous electrodes, which were subsequently coated by a BDD thin-film. The electrodes were investigated by surface analysis methods and electrochemical techniques before and after BDD deposition. Cyclic voltammetry measurements showed a wide potential window in saline solution (between -1.3 V and 1.2 V vs. Ag/AgCl). Electrodes with the highest thickness and porosity exhibited the lowest impedance magnitude and a charge storage capacitance of 253 mC/cm2, which largely exceeds the values previously reported for porous BDD electrodes. Electrodes with relatively thinner and less porous coatings displayed the highest pulsing capacitances, which would be more favorable for stimulation applications. Although BDD/TiN electrodes displayed a higher impedance magnitude and a lower pulsing capacitance as compared to the bare TiN electrodes, the wider potential window likely allows for higher charge injection without reaching unsafe potentials. The remarkable reduction in the impedance and improvement in the charge transfer capacity, together with the known properties of BDD films, makes this type of coating as an ideal candidate for development of reliable devices for chronic neural interfacing.
- **** - Resistance to protein adsorption and adhesion of fibroblasts on nanocrystalline diamond films: the role of topography and boron doping [Crossref]
- **** - Boron-doped nanocrystalline diamond electrodes for neural interfaces: in vivo biocompatibility evaluation [Crossref]
- 1995 - Cyclic voltammetric studies of charge transfer reactions at highly boron-doped polycrystalline diamond thin-film electrodes [Crossref]
- 2005 - Cellular adhesion and neuronal excitability on functionalised diamond surfaces [Crossref]
- 2012 - Study on structural, morphological and electrical properties of sputtered titanium nitride films under different argon gas flow [Crossref]
- 2018 - Nanocrystalline boron-doped diamond as a corrosion resistant anode for water oxidation via si photoelectrodes [Crossref]
- 2005 - Fundamental understanding and modeling of reactive sputtering processes [Crossref]
- 2008 - High aspect ratio diamond microelectrode array for neuronal activity measurements [Crossref]
- 2008 - Neural stimulation and recording electrodes [Crossref]
- 2003 - Electroanalysis at diamond-like and doped-diamond electrodes [Crossref]