Skip to content

Toward wafer-scale diamond nano- and quantum technologies

MetadataDetails
Publication Date2019-01-01
JournalAPL Materials
AuthorsRichard Nelz, Johannes Görlitz, Dennis Herrmann, Abdallah Slablab, Michel Challier
InstitutionsUniversity of Augsburg, Saarland University
Citations42
AnalysisFull AI Review Included
  • Document Type: The attached source material is an administrative user manual for the University Bibliography (UniBib) of Saarland University (UdS), published 29.08.2019.
  • Subject Matter: The text focuses entirely on bibliographic data management, ORCID integration, DOI/RIS/BibTeX mass import workflows, and author disambiguation within a university research repository system.
  • Technical Domain: Software documentation / institutional research information management, not a materials science, physics, chemistry, or engineering research paper.
  • Diamond / CVD / Material Science Content: None present. Zero references to diamond synthesis, MPCVD reactors, single crystal diamond (SCD), polycrystalline diamond (PCD), boron-doped diamond (BDD), metalization, polishing, or any related hardware parameters.
  • Extracted Quantitative Data: Only administrative metadata (telephone numbers, email addresses, ISSN 1624-2049, DOI 10.22323/2.17020305, ORCID format note) — no temperatures, pressures, gas flows, voltages, efficiencies, or coherence times.
  • Assessment: The document cannot be evaluated against 6CCVD’s MPCVD diamond capabilities because it contains no technical specifications, fabrication recipes, or performance metrics relevant to diamond materials.
  • Recommended Course of Action: Re-issue the request with the correct paper PDF (e.g., an MPCVD synthesis study, diamond optics paper, or BDD electrode research article) so that technical documentation and material recommendations can be generated.

Important Notice: This section is intentionally blank because the source document contains no diamond-related technical data. For reference, the only structured metadata extracted is administrative:

ParameterValueUnitContext
Document TypeUser Manual—Saarland University UniBib system guide
Document Version Date29.08.2019DD.MM.YYYYManual revision stamp
Sample DOI Cited10.22323/2.17020305DOIExample publication by Herb, Ulrich (2018)
Sample ISSN Cited1624-2049ISSNJournal of Science Communication
Sample ORCID Cited0000-0002-3500-311916-digit IDHerb, Ulrich ORCID iD
Support Telephone 10681-302 2798—UniBib general support
Support Telephone 20681-302 58024—UniBib general support
Technical Support Telephone 10681-302 58025—UniBib technical issues
Technical Support Telephone 20681-302 6630—UniBib technical issues
Support Email (General)[email protected]—UniBib registration/research support
Support Email (Technical)[email protected]—Subject line: “technical - UniBib”
Applicable Publication Years≥ 2017YearReporting cutoff for UniBib entries
Acceptable BrowsersFirefox, Chrome, Opera, Vivaldi, Edge—Internet Explorer flagged as incompatible
Imported File Format 1RIS—Reference manager export (EndNote, RefMan)
Imported File Format 2BibTeX—Reference manager export (EndNote, RefMan)
Imported File Format 3DOI—Single-record DOI lookup

No CVD Diamond Parameters Available: Temperature (°C), chamber pressure (mbar / Torr), microwave power (W), CH4/H2 gas flow ratios, substrate specifications, growth rates (µm/h), Raman FWHM values (cm-1), nitrogen concentration (ppm), boron concentration (ppm), sheet resistance (Ω·cm), surface roughness Ra (nm), and metalization layer thicknesses (nm) — all absent from source.


The “methodology” described in this document pertains strictly to academic publication registration workflows, not to any diamond fabrication process. The ordered procedural outline is reproduced below for completeness:

  1. User Registration
    • Register with University ID via the UniBib portal.
    • Edit personal research profile (full first name, faculty, department, professorship).
    • Optional: Link ORCID iD (16-digit identifier) for author disambiguation.
  2. Publication Registration Methods (Three Options)
    • Option A (Self-Entry, Recommended): Use DOI import for single-record lookup.
    • Option B (Department Proxy): Assign a delegate to register on the author’s behalf.
    • Option C (SULB Bulk): Email the publication list (with DOIs and ORCID) to [email protected].
  3. Mass Import Workflow
    • Export references from EndNote, Reference Manager, or similar tools.
    • Select file format: RIS, BibTeX, or DOI list.
    • Upload via the “DOI Import” or “RIS/BibTeX Import” menu entries.
    • Complete metadata fields manually in the “Unfinished Submissions” task pool.
  4. Post-Submission Review
    • SULB staff verify the entry.
    • Submitter is contacted only if clarification is needed.
  5. Author Disambiguation
    • Enter the first three letters of the co-author’s surname.
    • Click the magnifying-glass icon to assign co-author linkage.
    • Co-authors must be pre-registered in UniBib for linkage to succeed.
  6. Third-Party Synchronization (Planned)
    • Future bidirectional sync with FACTScience (Faculty of Medicine) and ORCID.

No CVD Reactor Recipe Available: Microwave power (W), substrate temperature (°C), chamber pressure (Torr / mbar), CH4 concentration (%), H2 flow rate (sccm), O2 flow rate (sccm), N2 doping level (ppm), B2H6 doping level (ppm), and growth duration (hours) — not applicable; document is administrative.


Important Disclaimer: The document provided is not a materials science paper — it is a procedural manual for managing a university bibliography database. There is no experimental work on diamond, MPCVD, or related topics to evaluate. The recommendations below explain what 6CCVD would offer if an applicable technical paper were submitted, and clarify why a re-issue of the request is necessary.

  • Applicable Materials:

    • Not applicable to this document. No 6CCVD product (Optical Grade SCD, Electronic Grade SCD, Heavy Boron-Doped PCD, Freestanding PCD, BDD electrodes, or metalized diamond substrates) can be mapped to this administrative manual.
    • If the intended paper addresses diamond for quantum sensing (e.g., NV centers), 6CCVD’s Optical Grade SCD with sub-ppm nitrogen and bulk coherence > 1 ms would be relevant.
    • If the intended paper addresses electrochemical sensing / wastewater treatment, 6CCVD’s Heavy Boron-Doped PCD (BDD) with > 1020 cm-3 carrier density would be relevant.
    • If the intended paper addresses thermal management for high-power electronics, 6CCVD’s Optical / Mechanical Grade PCD with thermal conductivity > 1800 W/m·K would be relevant.
  • Customization Potential:

    • The source manual makes no reference to material dimensions, metal stacks, or laser-cut geometries.
    • Hypothetical engagement: If the future technical paper specifies custom wafer diameters up to 125 mm (PCD) or 0.1 µm - 500 µm film thicknesses (SCD/PCD), 6CCVD’s custom MPCVD platforms can replicate these.
    • Metalization: 6CCVD offers in-house Au, Pt, Pd, Ti, W, and Cu metallization with optional laser-cut patterning — no such specification exists in the submitted document.
    • Polishing: If the future paper requires Ra < 1 nm surface finish (SCD) or Ra < 5 nm (PCD), 6CCVD can deliver.
    • Global Shipping: DDU default, DDP available — irrelevant to the current document but offered for future technical engagements.
  • Engineering Support:

    • 6CCVD’s in-house PhD engineering team is available for material selection, growth parameter optimization, and device integration consultancy.
    • Note: This service cannot be applied to the submitted document, as it contains no diamond-related engineering parameters to optimize.
  • Call to Action: To receive a fully populated technical brief against a 6CCVD-aligned materials science paper, please resubmit the correct PDF (an MPCVD synthesis, diamond characterization, or diamond device study). Once a true technical paper is provided, 6CCVD will generate the full Executive Summary, Specifications table, Methodology recipe, and Material Recommendation set within the standard template.

For custom specifications or material consultation on genuine diamond-related research projects, visit 6ccvd.com or contact our engineering team directly.

View Original Abstract

We investigate native nitrogen vacancy (NV) and silicon vacancy (SiV) color centers in a commercially available, heteroepitaxial, wafer-sized, mm thick, single-crystal diamond. We observe single, native NV centers with a density of roughly 1 NV per μm3 and moderate coherence time (T2 = 5 μs) embedded in an ensemble of SiV centers. Using low temperature luminescence of SiV centers as a probe, we prove the high crystalline quality of the diamond especially close to the growth surface, consistent with a reduced dislocation density. Using ion implantation and plasma etching, we verify the possibility to fabricate nanostructures with shallow color centers rendering our material promising for fabrication of nanoscale sensing devices. As this diamond is available in wafer-sizes up to 100 mm, it offers the opportunity to up-scale diamond-based device fabrication.