Silicon substrate surface modification with nanodiamonds for CVD-synthesis of polycrystalline diamond
At a Glance
Section titled “At a Glance”| Metadata | Details |
|---|---|
| Publication Date | 2021-02-01 |
| Journal | IOP Conference Series Materials Science and Engineering |
| Authors | A L Maslov, N. I. Polushin, А. I. Laptev, E. A. Vysotina, T. V. Martynova |
| Institutions | National University of Science and Technology |
| Analysis | Full AI Review Included |
Executive Summary
Section titled “Executive Summary”- Objective: Optimize synthesis of high-quality, crack-free polycrystalline diamond (PCD) films on 62.5 mm silicon (111) substrates via CVD for photonic, electronic, and high-power laser applications.
- Seeding Innovation: Modified silicon surfaces with 4-6 nm detonation nanodiamonds dispersed via high-intensity cavitation (UNIS VKV system) to maximize nucleation center density and accelerate continuous film formation.
- Deposition Parameters: Achieved with Ardis 300 MPCVD reactor; microwave power 3.8 kW, chamber pressure 8.7 kPa, substrate temperature 900 °C.
- Gas Chemistry: Methane (99.5% purity) at 9 cm³/min and hydrogen (99.9999% purity) at 591 cm³/min, yielding a CH4/H2 ratio of 1.5% / 98.5%.
- Film Characteristics: Produced continuous 20 µm thick PCD layers free of peripheral cracks and discontinuities.
- Post-Processing: Substrate removal via ammonium fluoride/HF wet etching; optional air annealing at 540 °C to eliminate graphitic phases.
- Significance: Validates a reproducible pathway to scale PCD wafer area for advanced thermal management and optical-grade substrates.
Technical Specifications
Section titled “Technical Specifications”| Parameter | Value | Unit | Context |
|---|---|---|---|
| Substrate | Silicon (111), 62.5 mm dia | — | Polished to Ra < 1 µm |
| Nanodiamond Seed Size | 4-6 | nm | Detonation ND powder |
| Nanodiamond Zeta Potential | High (stable colloid) | mV | Measured via Malvern Zetasizer Nano ZS |
| Reactor Type | Ardis 300 (MPCVD) | — | 2.45 GHz industrial platform |
| Microwave Power | 3800 (3.8) | W (kW) | Magnetron input |
| CH4 Flow Rate | 9 | cm³/min | 99.5% purity |
| H2 Flow Rate | 591 | cm³/min | 99.9999% purity |
| CH4 Concentration | 1.5 | % | Volumetric in plasma feed |
| H2 Concentration | 98.5 | % | Volumetric in plasma feed |
| Chamber Pressure | 8.7 | kPa | Process baseline |
| Substrate Temperature | 900 | °C | Measured at susceptor |
| Film Thickness | 20 | µm | Continuous PCD layer |
| Anneal Temperature (Optional) | 540 | °C | Air ambient, removes sp2 phase |
| Etchant | NH4F + HF | — | Substrate dissolution bath |
Key Methodologies
Section titled “Key Methodologies”-
Nanodiamond Colloid Synthesis
- Procure commercial 4-6 nm ND powder.
- Disperse using UNIS VKV high-intensity cavitation hardware.
- Validate colloidal stability via zeta potential (Malvern Zetasizer Nano ZS).
-
Silicon Substrate Preparation
- Select 62.5 mm Si (111) wafers.
- Mechanically polish to Ra < 1 µm to remove surface haze and scratches.
-
Seeding (Nucleation Layer Formation)
- Apply ND suspension via pipette.
- Mechanical rub with lint-free wipe for 30 s.
- Air-dry under ventilation hood.
-
MPCVD Diamond Deposition
- Ramp Ardis 300 to 3.8 kW microwave power.
- Hold 8.7 kPa chamber pressure; stabilize substrate at 900 °C.
- Introduce H2 at 591 cm³/min and CH4 at 9 cm³/min.
- Grow until 20 µm film thickness is achieved.
-
Film Release & Post-Processing
- Etch Si substrate in NH4F/HF solution.
- Wash twice in distilled water.
- Optionally anneal at 540 °C in air to remove graphitic phases.
6CCVD Solutions & Capabilities
Section titled “6CCVD Solutions & Capabilities”-
Applicable Materials: The 20 µm PCD layer demonstrated in this study maps directly to Optical Grade Polycrystalline Diamond and Freestanding PCD Wafers offered in our standard catalog. For thermal/laser window extension, our Optical Grade SCD or Heavy Boron-Doped PCD (BDD) variants can substitute to enhance thermal conductivity or introduce electrical conductivity respectively.
-
Customization Potential:
- Diameter Scaling: While this paper used 62.5 mm Si, our internal MPCVD capability supports free-standing PCD plates and wafers up to 125 mm, directly addressing the paper’s stated bottleneck of “obtaining high-quality films of required size.”
- Thickness Range: We routinely deposit PCD from 0.1 µm up to 500 µm, and can supply thicker freestanding substrates up to 10 mm upon request.
- Surface Finishing: Post-deposition, our in-house polishing line delivers Ra < 5 nm on inch-class PCD and Ra < 1 nm on SCD surfaces—critical for downstream optical or electronic integration.
- Metallization & Patterning: We provide internal Ti, Pt, Au, Pd, W, and Cu metallization with optional laser-cut geometries, eliminating the need for third-party processing after PCD release.
-
Seeding Alternative: For customers seeking to bypass the colloidal seeding bottleneck entirely, our Laser-Cut, Pre-Seeded Wafers and Bare PCD Templates remove process variability and accelerate R&D timelines.
-
Engineering Support: Our in-house PhD engineering team routinely collaborates on MPCVD reactor recipe development, seeding protocol optimization, and etch-based PCD release for high-power laser and microelectronics clients. We can advise on methane concentration tuning, pressure scaling, and substrate selection to replicate or extend this work beyond the 900 °C / 8.7 kPa regime.
-
Logistics: All orders ship globally with DDU as standard, with DDP available for qualifying regions.
For custom specifications or material consultation, visit 6ccvd.com or contact our engineering team directly.
View Original Abstract
Abstract The use of polycrystalline diamond films is promising in photonics and electronics, as well as in other fields of science and technology. At present, it is limited by the complexity of obtaining high-quality films of required size, associated with the cracks formation at the film periphery caused by thermal stresses. Also, one of the key points is to increase films growth rate without sacrificing of their continuity and high quality. Substrate surface preparation makes possible to increase the initial rate of film formation and to form a continuous layer of diamond film on its surface. This work presents the results of polycrystalline films synthesis and the selection of optimal deposition regime. These results make possible to obtain high-quality polycrystalline diamond films of a larger area, which will significantly expand scope of their application.