Skip to content

Accelerating double pulse all-optical write/erase cycles in metallic ferrimagnets

MetadataDetails
Publication Date2022-03-14
JournalApplied Physics Letters
AuthorsFelix Steinbach, Nele Stetzuhn, Dieter Engel, Unai Atxitia, Clemens von Korff Schmising
InstitutionsMax-Born-Institute for Nonlinear Optics and Short Pulse Spectroscopy, Technische Universität Berlin
Citations23
AnalysisFull AI Review Included

Accelerating Double Pulse All-Optical Write/Erase Cycles in Metallic Ferrimagnets: Technical Documentation

Section titled “Accelerating Double Pulse All-Optical Write/Erase Cycles in Metallic Ferrimagnets: Technical Documentation”
  • Demonstrates deterministic, ultrafast toggle switching of magnetization in GdFe and GdCo ferrimagnetic alloys using consecutive femtosecond laser pulses, targeting terahertz-frequency data storage applications.
  • Achieves a record minimum pulse-to-pulse separation (Δt1/2) of 7 ps for reliable all-optical write/erase cycles in a GdCo alloy.
  • Establishes that thermal management via substrate selection is a critical rate-limiting factor; high thermal conductivity substrates drastically accelerate cooling and enable higher repetition rates.
  • Compares three substrate classes — amorphous glass, crystalline silicon, and polycrystalline diamond — to quantify heat-sink efficiency in magnetic switching experiments.
  • Identifies the Co-Co exchange interaction as the dominant mechanism governing ultrafast magnetization recovery, explaining why GdCo outperforms GdFe at sub-10 ps timescales.
  • Estimates Curie temperatures of ~570 K (GdCo) and ~515 K (GdFe) via combined magneto-optical and heat-diffusion analysis, supporting the thermodynamic switching model.
  • Provides a roadmap for future petabit/s magnetic memory devices by linking substrate engineering to intrinsic magnetic relaxation dynamics.

ParameterValueUnitContext
Minimum pulse-to-pulse separation (Δt1/2)7psGdCo on polycrystalline diamond substrate
Δt1/2 on crystalline Si substrate~500psGdFe alloy
Δt1/2 on amorphous glass substrate~10nsGdFe alloy
Curie temperature (TC, GdCo)~570KEstimated via M(T) fitting
Curie temperature (TC, GdFe)~515KEstimated via M(T) fitting
Fluence threshold for AOS (Fth, Si/GdCo)8.4mJ/cm2Single-pulse switching threshold
Fluence threshold for AOS (Fth, diamond/GdFe)5.9mJ/cm2Single-pulse switching threshold
Fluence threshold for AOS (Fth, glass/GdFe)7.3mJ/cm2Single-pulse switching threshold
Maximum achievable toggle frequency~140GHzInverse of 7 ps separation
Heat diffusion timescale (polycrystalline diamond)~3psTwo-temperature model simulation
Heat diffusion timescale (crystalline Si)~5-6psTwo-temperature model simulation
Heat diffusion timescale (glass)>500psTwo-temperature model simulation
GdFe alloy compositionGd27Fe64Co9at.%Benchmark from prior literature
Probe wavelength400nmFrequency-doubled Ti:Sapphire
Pump pulse duration<100fsFemtosecond optical switching regime

  • Sample Preparation: Thin-film ferrimagnetic alloys (GdFe, GdCo) deposited by standard sputtering or evaporation onto three substrates:
    1. Amorphous glass (low thermal conductivity, ~1 W/m·K).
    2. Crystalline silicon (moderate thermal conductivity, ~150 W/m·K).
    3. Polycrystalline diamond (high thermal conductivity, &gt;1000 W/m·K).
  • Wide-Field Magneto-Optical Microscopy: A custom-built setup utilizing a 400 nm probe beam (frequency-doubled from 800 nm Ti:Sapphire) with sub-micrometer spatial resolution to image transient magnetic domain states.
  • Double-Pulse Excitation Scheme:
    • Pump beam 1 (write): Circularly polarized femtosecond pulse at fluence F1.
    • Pump beam 2 (erase): Delayed pulse at fluence F2, temporally separated by Δt1/2.
    • Final state classification: Double AOS (successful toggle), single AOS (no switching), or multi-domain (failed toggle).
  • Fluence Ratio Mapping: Systematic variation of F2/F1 from 0.1 to &gt;1.2 to identify optimal re-switching parameter windows for each substrate/alloy combination.
  • Heat Diffusion Modeling: 1D two-temperature model (UDKM1DSIM toolbox) simulating electron-phonon equilibration and lattice cooling dynamics across substrates with varying thermal conductivities.
  • Curie Temperature Extraction: Combined analysis of time-resolved magneto-optical data, heat diffusion calculations, and phenomenological M(T) relations to estimate TC values for GdFe and GdCo.
  • Phase Diagram Construction: Mapping final magnetic states (toggle, single AOS, multi-domain) as a function of Δt1/2 and F2/F1 for each substrate-alloy combination.

The substrates and thermal management layers used in this study align directly with 6CCVD’s MPCVD diamond production capabilities:

Paper RequirementRecommended 6CCVD Material
Polycrystalline diamond substrate for rapid heat extractionOptical/Mechanical Grade PCD (free-standing plates, &lt;5 nm Ra polish available)
Thermal spreader for ultrafast magnetic switching experimentsHigh Thermal Conductivity PCD (&gt;1000 W/m·K achievable with optimized MPCVD recipes)
Transparent or semi-transparent substrates for optical accessSCD (Single Crystal Diamond) for IR/visible transparency with extreme thermal conductivity
Heat-sink layers for spintronic thin-film depositionCustom-dimension PCD wafers up to 125mm diameter

For thin-film magnetic alloy deposition (GdFe, GdCo), 6CCVD’s as-grown or polished PCD substrates provide an ideal platform, offering exceptional thermal conductivity without the lattice-mismatch complications of heteroepitaxial growth on diamond.

  • Custom Dimensions: 6CCVD routinely supplies polycrystalline diamond plates and wafers up to 125 mm in diameter, enabling large-area sample fabrication for wide-field magneto-optical microscopy experiments similar to those in this study.
  • Thickness Control: PCD substrates can be supplied from 0.1 µm to 500 µm (thin films) up to 10 mm (bulk heat sinks), allowing researchers to optimize thermal mass and heat extraction rates.
  • Surface Engineering: For magneto-optical experiments requiring minimal optical scattering, 6CCVD offers Ra &lt; 5 nm polishing on inch-size PCD, reducing probe-beam artifacts at 400 nm wavelengths.
  • Metalization Services: For experiments requiring electrodes, heater elements, or thermal monitoring, 6CCVD provides in-house metalization (Au, Pt, Pd, Ti, W, Cu) to integrate electrical contacts directly onto diamond substrates.
  • Laser Cutting: 6CCVD’s custom laser cutting services enable complex geometries and chip-level dicing for device fabrication or multi-sample test arrays.

This research demonstrates that substrate thermal conductivity is a first-order design variable for ultrafast spintronic devices. 6CCVD’s in-house PhD engineering team can assist with:

  • Material Selection: Identifying the optimal PCD or SCD grade (thermal, optical, or mechanical) for specific ultrafast magnetics experiments.
  • Custom Specifications: Tailoring substrate thickness, surface roughness, and lateral dimensions to match experimental chamber geometries and deposition tooling.
  • Composite Solutions: Developing hybrid metalization patterns (e.g., Ti/Pt/Au stacks) for integrated thermal/electrical functionality.
  • Scalability Guidance: Advising on pathway from laboratory coupon to wafer-scale production for future device prototyping.

Whether your project targets terahertz magnetic memory, ultrafast optical switching, or advanced heat-sink engineering for spintronics, 6CCVD provides the diamond substrate expertise to accelerate your research.

For custom specifications, material consultation, or a quote on polycrystalline diamond substrates tailored to your ultrafast spintronics research, visit 6ccvd.com or contact our engineering team directly.

View Original Abstract

All-optical switching of magnetic order presents a promising route toward faster and more energy efficient data storage. However, a realization in future devices is ultimately dependent on the maximum repetition rates of optically induced write/erase cycles. Here, we present two strategies to minimize the temporal separation of two consecutive femtosecond laser pulses to toggle the out-of-plane direction of the magnetization of ferrimagnetic rare-earth transition metal alloys. First, by systematically changing the heat transfer rates using either amorphous glass, crystalline silicon, or polycrystalline diamond substrates, we show that efficient cooling rates of the magnetic system present a prerequisite to accelerate the sequence of double pulse toggle switching. Second, we demonstrate that replacing the transition metal iron by cobalt leads to a significantly faster recovery of the magnetization after optical excitation allowing us to approach terahertz frequency of write/erase cycles with a minimum pulse-to-pulse separation of 7 ps.

  1. 2010 - Ultrafast optical manipulation of magnetic order [Crossref]
  2. 2020 - Fundamentals and perspectives of ultrafast photoferroic recording [Crossref]
  3. 2007 - All-optical magnetic recording with circularly polarized light [Crossref]
  4. 2011 - Transient ferromagnetic-like state mediating ultrafast reversal of antiferromagnetically coupled spins [Crossref]
  5. 2016 - Role of electron and phonon temperatures in the helicity-independent all-optical switching of GdFeCo [Crossref]
  6. 2019 - Ultrafast magnetization switching in nanoscale magnetic dots [Crossref]
  7. 2021 - Role of element-specific damping in ultrafast, helicity-independent, all-optical switching dynamics in amorphous (Gd,Tb)Co thin films [Crossref]
  8. 2019 - Integration of Tb/Co multilayers within optically switchable perpendicular magnetic tunnel junctions [Crossref]
  9. 2017 - Deterministic all-optical switching of synthetic ferrimagnets using single femtosecond laser pulses [Crossref]
  10. 2019 - Comparing all-optical switching in synthetic-ferrimagnetic multilayers and alloys [Crossref]