Skip to content

Luminescent diamond composites

MetadataDetails
Publication Date2022-05-09
JournalFunctional Diamond
AuthorsVadim Sedov, С. В. Кузнецов, Artem Martyanov, Victor Ralchenko
InstitutionsHarbin Institute of Technology, Prokhorov General Physics Institute
Citations17
AnalysisFull AI Review Included
  • Composite Material Innovation: The paper reviews the fabrication and characterization of luminescent diamond composites by integrating rare-earth (RE) based nanoparticles (fluorides, oxides, garnets) into CVD-grown polycrystalline diamond (PCD) films, creating a new class of robust photo- and X-ray-luminescent materials.
  • Optimal Particle Parameters: RE-based nanoparticles must be 20-500 nm in diameter (optimum ~50 nm) to withstand aggressive CVD plasma environments (900-1100 °C) without decomposing or subliming.
  • Fabrication Recipe: The standard procedure involves spin-coating a colloidal solution of RE nanoparticles (e.g., EuF3, CeF3, NaGdF4:Eu, YAG:Ce) onto a Si substrate, growing a first PCD layer via CVD, spin-coating a second layer of particles, and capping with a final PCD layer to encapsulate the luminescent sources.
  • Optical Performance Achievements:
    • EuF3 composites: Bright orange photoluminescence peaking at 611.6 nm with a decay time of ~0.327 ms (purity ~98.2%).
    • NaGdF4:Eu composites: Emission at 611.7 nm demonstrating robust photoluminescence and X-ray luminescence (XRL) suitable for radiation monitoring screens.
    • YAG:Ce composites: Fast scintillation response (< 45 ns) suitable for synchrotron X-ray beam profiling.
  • Target Applications: Photonics, quantum biomarkers, high-power synchrotron and X-ray beam monitors, X-ray visualization screens, and electroluminescent devices.
  • Substrate Compatibility: Successfully demonstrated on standard Si(100) substrates, with layer thicknesses ranging from 0.5 µm to 12 µm.

ParameterValueUnitContext
RE Particle Size Range20-500nmOptimal range to survive CVD plasma etching
Average Particle Size (EuF3)~50nmDemonstrated in Sedov et al. (2017)
PCD Composite Thickness2.5-12µmTotal thickness of the sandwich composite
CVD Growth Temperature900-1100°CRequired thermal stability window for RE compounds
EuF3 Emission Peak611.6nm5D0 &rarr; 7F2 transition of Eu³
EuF3 Decay Time~0.327msLuminescence lifetime at 611 nm
Emission Purity (EuF3)~98.2%Spectral purity of the orange emission band
NaGdF4:Eu Emission611.7nm5D0 &rarr; 7F2 transition
NaGdF4:Eu In-Crystal Quantum Yield~24.5%Measured for 3% Eu-doped sample
YAG:Ce Scintillation Decay< 45nsFast component for X-ray beam monitoring
CeF3 Decay Time~24.5nsFast scintillation response (545-565 nm emission)
CeF3 Emission Peak340-565nmBroad band from 5d&rarr;4f transition
CeF3 Bandgap3.04eVFor X-ray absorption calculations
X-ray Excitation Energy (EuF3)19keVDemonstrated XRL measurement energy
Thermal Conductivity (Diamond)> 2000W/m·KEffective heat-sink for embedded RE particles
Substrate TypeSi(100)—Standard substrate for initial PCD layer
Microwave Plasma PowerNot specifiedWReferenced as standard MPCVD setup

  1. Substrate Preparation: Use polished Si(100) wafers as the base substrate. Clean via standard RCA or solvent processes to ensure uniform nucleation.
  2. Initial PCD Layer Deposition: Grow a base polycrystalline diamond (PCD) film using Microwave Plasma CVD (MPCVD) in H2/CH4 gas mixtures. The deposition time and CH4 concentration are tuned to achieve a thickness of 0.5-1 µm with a nanocrystalline-to-microcrystalline structure.
  3. Spin-Coating of RE Nanoparticles: Disperse the RE-based nanoparticles (EuF3, CeF3, NaGdF4:Eu, YAG:Ce, etc.) in an aqueous or non-aqueous colloidal solution. Apply via spin-coating onto the initial PCD layer to achieve a uniform monolayer of particles (target density: 1-50 µg/cm2).
  4. Intermediate PCD Layer Growth: Resume MPCVD growth to encapsulate the RE particles in a second PCD layer, burying the particles within the diamond matrix.
  5. Optional Second Particle Layer: For multilayer composites, spin-coat an additional layer of RE nanoparticles onto the intermediate PCD layer.
  6. Final PCD Overgrowth: Grow a top PCD layer (thickness matched to the desired composite thickness, typically 1-5 µm) to fully seal the luminescent particles, preventing plasma etching damage and providing environmental protection.
  7. Characterization: Use SEM/EDX for cross-sectional imaging to confirm particle position, Raman spectroscopy to verify diamond film quality (sp3 phase dominance), and photoluminescence (PL) / X-ray luminescence (XRL) spectroscopy to characterize the optical output.

  • Applicable Materials:

    • Optical Grade Polycrystalline Diamond (PCD): This research relies on high-quality PCD films grown via MPCVD. 6CCVD provides PCD plates and wafers up to 125 mm in diameter, with thickness ranging from 0.1 µm to 500 µm, and surface roughness polished down to Ra < 5 nm for inch-size PCD — ideal for embedding luminescent nanoparticles while maintaining optical transparency.
    • Boron-Doped Polycrystalline Diamond (BDD): For electroluminescent composite devices (e.g., diamond/HoF3/diamond or diamond/CeF3 composite films requiring electrical conduction), 6CCVD’s Heavy Boron Doped PCD offers tunable resistivity while preserving the MPCVD matrix structure required for RE particle encapsulation.
    • Single Crystal Diamond (SCD) Substrates: For advanced quantum luminescence or single-photon emitter applications, 6CCVD’s Optical Grade SCD wafers (polished to Ra < 1 nm) can serve as homoepitaxial substrates for subsequent composite layer growth.
  • Customization Potential:

    • Particle Integration Support: 6CCVD’s MPCVD reactors are optimized for multi-stage deposition protocols (stop-growth, intermediate layer, resume-growth) — directly applicable to the spin-coat & overgrowth methodology described in this paper.
    • Custom Metalization: For devices requiring sandwich-type electrode structures (e.g., electroluminescent diamond/RE/diamond films), 6CCVD offers in-house Ti, Pt, Au, Pd, W, and Cu metalization with custom patterning.
    • Laser Cutting & Dicing: 6CCVD provides precision laser cutting to shape composite diamond membranes into specific geometries required for synchrotron beam monitors, X-ray visualization windows, or scintillator arrays.
    • Thickness Engineering: Custom PCD layer thicknesses from 0.1 µm to 500 µm allow precise tuning of the composite’s optical density, X-ray absorption, and mechanical robustness.
  • Engineering Support:

    • 6CCVD’s in-house PhD-level engineering team specializes in MPCVD diamond synthesis and can provide direct consultation on material selection for luminescent diamond composite projects, including recommendations on PCD vs. SCD substrates, optimal film thickness for specific RE dopants, and matching thermal expansion coefficients to substrate materials (Si, Mo, Ir).
    • We can assist in scaling laboratory composite fabrication recipes (e.g., EuF3-diamond, NaGdF4:Eu-diamond, YAG:Ce-diamond) from small coupons to 125 mm wafer formats for production volumes.
  • Call to Action: For custom specifications, material consultation, or to discuss your luminescent diamond composite project, visit 6ccvd.com or contact our engineering team directly.

View Original Abstract

Diamond is valuable material with extraordinary high thermal conductivity and transparency in a wide spectral range from UV to IR and longer wavelengths. Defects and impurities in the diamond lattice can absorb and emit light at wavelengths specific for each of such “color centers.” Particularly, the vacancy-related defects in diamond, such as nitrogen-vacancy (NV) or silicon-vacancy (SiV) centers, are actively investigated due to their potential for biomedicine, quantum optics, local thermometry and magnetometry. Although a great variety of different color centers in diamond are discovered, only a limited number of those point defects can be reliably reproduced in synthetic diamond, obtained either by chemical vapor deposition (CVD) or high-pressure high-temperature (HPHT). An alternative approach to producing luminescent diamond-based materials is to integrate stable non-diamond sources of luminescence in the form of nano- or microparticles of foreign materials into the pristine diamond. The produced diamond composites possess excellent properties of diamond combined with optical emission characteristics, which cannot be provided with intrinsic defects in diamond. The good candidates for the materials of such impurities are well-investigated fluorides and oxides doped by rare-earth elements (RE) or other luminescent chalcogenides such as sulfides, selenides and tellurides. Here we briefly review recent achievements in fabrication and properties of these new luminescent diamond-RE composites, compare them with luminescent properties of doped diamond, and outline prospects for applications of the luminescent diamond composites for photonics, markers, monitors of high-power synchrotron, X-ray beams and X-ray lasers.