Effect of diamond particle type on the thermal properties of diamond/copper composites
At a Glance
Section titled “At a Glance”| Metadata | Details |
|---|---|
| Publication Date | 2022-11-02 |
| Journal | Kovove Materialy-Metallic Materials |
| Authors | Qingzhu Ge, Yan Meng, Yang Jiang, Yonghong Wang, Junwu Liu |
| Institutions | Northwestern Polytechnical University, Hefei University of Technology |
| Citations | 2 |
| Analysis | Full AI Review Included |
Diamond/Copper Composites: Chromium Interface Engineering for High-Performance Thermal Management
Section titled “Diamond/Copper Composites: Chromium Interface Engineering for High-Performance Thermal Management”Executive Summary
Section titled “Executive Summary”- Interface Engineering Breakthrough: Demonstrates that molten-salt chromium metallization on diamond particles creates a chromium carbide (CrC) interface layer, dramatically enhancing wettability and bonding between diamond and copper matrices.
- Exceptional Thermal Conductivity: RVD diamond/Cu composites achieve a peak thermal conductivity of 483 W·m-1·K-1, while MBD diamond/Cu composites reach 450 W·m-1·K-1 — both significantly outperforming uncoated baseline composites.
- Optimal Coating Threshold: Thermal conductivity follows a non-linear trend — increasing then decreasing — with 8 wt% Cr identified as the optimal coating content for maximizing interfacial heat transfer without coating delamination.
- CTE Suppression: Chromium metallization substantially reduces the coefficient of thermal expansion (CTE), with Cr-coated MBD composites aligning closely with theoretical Kerner model predictions.
- Particle Morphology Impact: Irregular RVD diamond particles yield higher peak thermal conductivity than cuboctahedral MBD particles, though MBD composites exhibit CTE behavior closer to theoretical predictions due to their near-spherical geometry.
- Method Validation: Combines molten-salt metallization (950°C, 60 min) with vacuum hot pressing, providing a scalable route for next-generation electronic packaging materials targeting high-power semiconductor applications.
Technical Specifications
Section titled “Technical Specifications”| Parameter | Value | Unit | Context |
|---|---|---|---|
| Peak Thermal Conductivity (RVD) | 483 | W·m-1·K-1 | 8% Cr coating, RVD diamond/Cu composite |
| Peak Thermal Conductivity (MBD) | 450 | W·m-1·K-1 | Optimal Cr content, MBD diamond/Cu composite |
| Optimal Cr Coating Content | 8 | wt% | Identified as peak performance threshold |
| Cr Coating Temperature | 950 | °C | Molten salt method, heat treatment duration |
| Heat Treatment Duration | 60 | min | Chromium metallization process |
| CTE Test Temperature Range | 25-300 | °C | Vacuum conditions, heating rate 5°C·min-1 |
| Heating Rate (TMA) | 5 | °C·min-1 | Thermal mechanical analyzer settings |
| Diamond CTE (αdiamond) | 2.3 × 10-6 | K-1 | Reference value for modeling |
| Copper CTE (αcopper) | 17 × 10-6 | K-1 | Reference value for modeling |
| Diamond Bulk Modulus (Kdiamond) | 580 | GPa | Kerner model input |
| Copper Bulk Modulus (Kcopper) | 140 | GPa | Kerner model input |
| Copper Shear Modulus (Gcopper) | 49 | GPa | Kerner model input |
| Sample Dimensions (Thermal Diffusivity) | Ø13 × 2 | mm | Disc geometry for LFA 457 analyzer |
| Sample Dimensions (CTE) | 2 × 2 × 30 | mm³ | Rectangular bar for TMA402F3 |
| Vacuum Degree (CTE Testing) | < 10-2 | mbar | TMA measurement environment |
| Diamond Volume Fraction Range | 50-70 | % | Composite formulation range |
Key Methodologies
Section titled “Key Methodologies”- Diamond Substrate Preparation: Select MBD (Metal Bond grade) and RVD (Resinoid/Vitrified Bond grade) diamond particles with distinct morphologies — irregular blocky (RVD) versus regular cuboctahedral (MBD).
- Surface Metallization via Molten Salt Method:
- Submerge diamond particles in chloride-based molten salt medium containing chromium source.
- Heat to 950°C for 60 minutes under protective atmosphere.
- Chloride melt provides fluid reaction medium, improving wettability and enabling Cr dissolution.
- Form uniform chromium carbide (CrC) coating on diamond surfaces at varying Cr contents (6%, 8%, 10%).
- Composite Fabrication via Vacuum Hot Pressing:
- Blend Cr-coated diamond particles with copper matrix powder.
- Consolidate under vacuum conditions to achieve dense composite pellets.
- Thermal Diffusivity Measurement: LFA 457 laser flash analysis on disc samples (Ø13 × 2 mm); thermal conductivity calculated via λ = α · ρ · Cp.
- CTE Characterization: TMA402F3 thermomechanical analyzer with 2 × 2 × 30 mm³ specimens, heating from 25-300°C at 5°C·min-1 under vacuum (< 10-2 mbar).
- Microstructural Analysis: Field-emission SEM (ZEISS Sigma-300) with EDS mapping to evaluate fracture surfaces, coating integrity, and interfacial bonding.
- Density Determination: Archimedes method for actual density; mixing rule for theoretical density; relative density calculated for quality assessment.
- Theoretical Modeling: Comparison against Turner and Kerner models for CTE prediction validation.
6CCVD Solutions & Capabilities
Section titled “6CCVD Solutions & Capabilities”Applicable Materials
Section titled “Applicable Materials”This research requires high-quality polycrystalline diamond (PCD) particles with controlled morphology for thermal management composite fabrication. 6CCVD offers:
- Polycrystalline Diamond (PCD) Particles: Available in various mesh sizes for metal matrix composite reinforcement, suitable for both MBD-type (regular morphology) and RVD-type (irregular morphology) applications.
- Boron-Doped Diamond (BDD): For applications requiring electrical conductivity combined with thermal management properties.
- Single Crystal Diamond (SCD): Where maximum thermal conductivity at the particle level is required for premium-grade composites.
Customization Potential
Section titled “Customization Potential”The paper’s methodology requires precise control over diamond particle characteristics for optimal composite performance. 6CCVD supports:
- Custom Particle Sizing: Diamond particles tailored to specific mesh requirements for composite packing density optimization.
- Metallization-Ready Surfaces: Clean, contamination-free surfaces optimized for downstream coating processes (Cr, Ti, W, Mo, B carbide formation).
- Thickness Versatility: PCD substrates available from 0.1 µm to 500 µm for thin-film thermal spreader applications where bulk composites are not feasible.
- Wafer-Scale Integration: For direct thermal management solutions, 6CCVD provides PCD plates/wafers up to 125mm, eliminating the need for composite processing in certain heat sink architectures.
- Precision Polishing: Ra < 5nm surface finish on inch-size PCD enables direct bonding to semiconductor dies for advanced packaging.
Engineering Support
Section titled “Engineering Support”6CCVD’s in-house PhD-level engineering team provides expert consultation for:
- Material Selection: Matching diamond grade (SCD vs. PCD), particle morphology, and purity to your specific thermal management composite formulation.
- Interface Engineering Guidance: Recommendations on compatible metallization schemes (Ti, W, Cr, B) for your matrix material and operating conditions.
- Prototype Development: Custom diamond configurations for feasibility studies in next-generation electronic packaging applications targeting aerospace, defense, and high-power semiconductor sectors.
- Scalability Assessment: Guidance on transitioning from laboratory-scale composite fabrication to production volumes.
Call to Action
Section titled “Call to Action”For custom diamond particle specifications, metallization consultation, or material selection for your thermal management composite project, visit 6ccvd.com or contact our engineering team directly. Global shipping available (DDU default, DDP upon request).
View Original Abstract
The molten salt method was used to plate chromium on the surfaces of MBD (Diamond grains for the Metal Bond tool) and RVD (Diamond grains for Resinoid and Vitrified bond) diamond particles, respectively, to metalize their surfaces.The Cr-coated diamond/copper composites were obtained by vacuum hot pressing method, and the thermal conductivity and coefficient of thermal expansion of the two composites were compared.The results indicate that the thermal conductivity of both composites prepared by Cr-coated diamond particles and copper matrix was greatly improved.The thermal conductivity showed a trend of increasing and then decreasing with the increase of chromium content.The thermal conductivity of RVD diamond/copper composites was up to 483 W m -1 K -1 , and MBD diamond/copper composites was up to 450 W m -1 K -1 , and the thermal conductivity of RVD diamond/copper composites was generally higher than that of MBD diamond/copper composites, the CTE of the composites prepared by Cr-coated diamond particles and copper matrix decreased significantly.