Skip to content

Unconventional Giant “Magnetoresistance” in Bosonic Semiconducting Diamond Nanorings

MetadataDetails
Publication Date2023-02-17
JournalAdvanced Materials
AuthorsGufei Zhang, Ramiz Zulkharnay, Xiaoxing Ke, Meiyong Liao, Liwang Liu
InstitutionsKU Leuven, National Institute for Materials Science
Citations10
AnalysisFull AI Review Included
  • Phenomenon: Discovery of an unconventional giant negative “magnetoresistance” (up to 430%) in nanoscale diamond rings (DNRs), distinct from conventional GMR, CMR, or geometric MR.
  • Material System: Heavily boron-doped polycrystalline diamond thin films (BDD), grown on SiO2/Si, with ultra-high boron concentration (~3.3 × 1021 cm−3) placing the material deep on the metallic side of the insulator-metal transition.
  • Structure: DNRs are hollow square loops (~280 × 280 nm inside, ~720 × 720 nm outside) composed of ~200-220 nm-wide polycrystalline diamond nanowires, fabricated via lithography, RIE, and focused Ga ion beam milling.
  • Key Physics: Below Tc, DNRs transition from metal to a “bosonic semiconductor” — Cooper pairs form and become trapped in the ring, depleting free electrons and producing a sharp resistance increase.
  • Comparative Behavior: Diamond half-loops (DHLs) under identical conditions exhibit conventional metal-superconductor transitions (zero resistance), highlighting the critical role of closed-loop geometry.
  • Quantum Significance: The 2Δ(0 K)/kBTc ratios of 7.9-8.4 vastly exceed the BCS limit of 3.53, indicating strong coupling and unconventional bosonic transport.
  • Application Outlook: DNRs are proposed as Cooper-pair trapping cavities for superconducting quantum devices, including qubits and artificial atoms.
ParameterValueUnitContext
Diamond Film Thickness850nmPolycrystalline DTF starting material
Boron Concentration~3.3 × 1021cm−3Deep metallic side of insulator-metal transition
Mean Grain Size~600nmDetermined by SEM analysis (lognormal distribution)
Surface Roughness~400nmAFM-measured, comparable to film thickness
SubstrateSi (100) with 300 nm SiO2—CVD deposition substrate
Diamond Wire Width (DNR)220 ± 50 (as-prepared), 200 ± 50 (effective)nmAfter Ga ion beam milling
DNR Inner Dimensions~280 × 280nmHollow square loop
DNR Outer Dimensions~720 × 720nmHollow square loop
Contact Pad MetalizationTi (10 nm) / Au (100 nm)—Electron-beam evaporation
Al Hard Mask Thickness100nmFor reactive ion etching
Tc Onset (DTF)4.4KBroad superconducting transition onset
Tc Offset (DTF)3.2KBroad superconducting transition offset
Resistance Anomaly Peak260-430%Overshoot above residual resistance in DNRs
Fitted Tc (DNR1 / DNR2)3.9 / 3.8KTwo-channel model fitting
Superconducting Gap Δ(0 K)1.3 / 1.4meVDNR1 / DNR2 fitted
2Δ(0 K)/kBTc7.9 / 8.4—Far exceeds BCS weak-coupling limit of 3.53
Coherence Length (Diamond)<15nm3D regime confirmed for DNRs
Raman Diamond Line Shift1332 → 1295cm−1Fano effect from heavy boron doping
Measurement Temperature Rangedown to ~0.3K3He/4He closed-cycle cryostat
Excitation Current5µALow-frequency AC for lock-in measurement
  • Substrate Preparation: Si (100) with 300 nm thermal SiO2 cleaned in acetone/isopropanol/deionized water; seeded with 3.3 ± 0.6 nm nanodiamond via electrospray deposition.
  • Diamond Growth: Hot filament CVD with Ta filament (>2000 °C), gas mixture of 1% CH4 in H2 with B2H6 (B:C ratio 8750 ppm), chamber pressure 20 Torr, deposition time ~1 h → ~500 nm film (850 nm reported thickness after optimization).
  • Microcross Patterning: Electron-beam lithography (50 kV, ~1 nA) → 100 nm Al hard mask via electron-beam evaporation (~10−5 Pa).
  • Reactive Ion Etching: ICP-RIE in O2 atmosphere, 90 sccm flow rate, 0.5 Pa chamber pressure, 800 W source power, 20 W bias power; auto-stopped upon reaching Si substrate (profilometer confirmation); Al mask removed with trimethylamine.
  • Electrode Definition: Laser lithography for contact pads; Ti (10 nm)/Au (100 nm) bilayer deposited via electron-beam evaporation; lift-off in acetone/methanol/DI water.
  • Focused Ion Beam Milling: FEI Helios DualBeam, Ga+ source at 30 kV; two-step process (0.43 nA rough → 0.23 nA-80 pA fine cleaning) to minimize beam damage to ~200 nm diamond nanowires.
  • Electrical Characterization: Four-probe measurements in 3He/4He cryostat with d.c. magnet (ICE Oxford); 5 µA AC excitation with lock-in amplifier; out-of-plane magnetic field configuration; V(I) measurements via d.c. current.

The work reported here demands Heavy Boron-Doped Polycrystalline Diamond (PCD) deposited to precise sub-micron thicknesses with exceptionally high boron concentrations (~3.3 × 1021 cm−3) — well above the insulator-metal transition threshold.

  • 6CCVD Heavy Boron-Doped PCD is engineered precisely for this regime, offering superconducting diamond thin films with controlled boron doping levels deep on the metallic side.
  • Substrate Options: SiO2/Si as used in the paper, as well as alternative non-diamond substrates compatible with our MPCVD reactor configurations.
  • Thickness Control: Custom PCD thicknesses from 0.1 µm to 500 µm — ideal for the 500-850 nm range exploited in this study.

The paper highlights several fabrication requirements that 6CCVD can directly address:

  • Custom Metalization: 6CCVD provides in-house Ti, Pt, Pd, W, Cu, and Au metalization. The Ti (10 nm)/Au (100 nm) bilayer used for four-probe contact pads can be deposited to specification, eliminating the need for third-party foundries.
  • Laser Cutting & Patterning: For pre-patterned diamond membranes or customized geometries beyond standard wafer dimensions, 6CCVD offers laser cutting services to deliver DNRs, DHLs, or other nanoscale architectures ready for downstream lithography/FIB processing.
  • Large-Area PCD Plates: Up to 125 mm diameter polycrystalline diamond plates enable wafer-scale fabrication of multiple nanoring devices per growth run.
  • Surface Engineering: While the 400 nm surface roughness of HFCVD polycrystalline films was a noted challenge, 6CCVD’s MPCVD capabilities allow smoother columnar growth or post-growth polishing (Ra < 5 nm for inch-size PCD) for applications requiring reduced surface topology.

The unconventional bosonic semiconducting behavior reported here — including the 430% resistance overshoot and giant negative “magnetoresistance” — depends critically on:

  • Boron concentration uniformity across the film
  • Grain boundary engineering
  • Precise thickness control
  • Surface roughness management

6CCVD’s in-house PhD team can assist with material selection and recipe optimization for superconducting quantum device projects, Cooper-pair trapping cavity fabrication, SQUID prototype development, and qubit substrate engineering. Our engineers are equipped to discuss the specific CVD parameters, doping profiles, and post-processing workflows required to replicate or extend this line of research.

For custom specifications, heavy boron-doped diamond consultation, or collaboration on superconducting quantum device prototyping, visit 6ccvd.com or contact our engineering team directly.

View Original Abstract

Abstract The emergence of superconductivity in doped insulators such as cuprates and pnictides coincides with their doping‐driven insulator-metal transitions. Above the critical doping threshold, a metallic state sets in at high temperatures, while superconductivity sets in at low temperatures. An unanswered question is whether the formation of Cooper pairsin a well‐established metal will inevitably transform the host material into a superconductor, as manifested by a resistance drop. Here, this question is addressed by investigating the electrical transport in nanoscale rings (full loops) and half loops manufactured from heavily boron‐doped diamond. It is shown that in contrast to the diamond half‐loops (DHLs) exhibiting a metal-superconductor transition, the diamond nanorings (DNRs) demonstrate a sharp resistance increase up to 430% and a giant negative “magnetoresistance” below the superconducting transition temperature of the starting material. The finding of the unconventional giant negative “magnetoresistance”, as distinct from existing categories of magnetoresistance, that is, the conventional giant magnetoresistance in magnetic multilayers, the colossal magnetoresistance in perovskites, and the geometric magnetoresistance in semiconductor-metal hybrids, reveals the transformation of the DNRs from metals to bosonic semiconductors upon the formation of Cooper pairs. DNRs like these could be used to manipulate Cooper pairs in superconducting quantum devices.