Skip to content

Effect of TiC layer thickness on the thermal conductivity and mechanical properties of Diamond/TiC/SiC composites

MetadataDetails
Publication Date2025-11-25
JournalJournal of the Ceramic Society of Japan
AuthorsZhao Huang, Xiaomeng Li, Haotian Yang, Zhaoxuan Yan, Bo Chen
InstitutionsXinjiang University
AnalysisFull AI Review Included
  • Process Innovation: Integration of stereolithography (DLP) 3D printing, DC magnetron sputtering, and reactive melt infiltration (RMI) to fabricate Diamond/TiC/SiC composites with complex geometries.
  • Optimal Interlayer: A 154 nm TiC transition layer maximizes thermal conductivity (478 W/(m·K)) and flexural strength (342 MPa), improving baseline performance by 14.6% and 11.4%, respectively.
  • Interface Engineering: The TiC interlayer forms a quasi-coherent Diamond/TiC interface and a semi-coherent TiC/SiC interface, reducing lattice mismatch, acoustic impedance contrast, and phonon scattering.
  • Acoustic Impedance Buffering: TiC’s intermediate acoustic impedance (ZTiC < ZDiamond and ZTiC > ZSiC) creates a phonon transmission bridge that lowers Kapitza resistance.
  • Diminishing Returns: TiC layers exceeding 154 nm introduce excess grain boundaries, phonon scattering, and porosity, degrading both thermal and mechanical performance.
  • Application Scope: Validated for next-generation thermal management in high-power-density electronics, aerospace, and energy transmission where conventional packaging materials fail.
  • Modeling Validation: Results align with Maxwell-Eucken effective medium theory and Hasselman-Johnson interfacial resistance frameworks, providing a predictive design window.
ParameterValueUnitContext
Diamond TypeMBD8—Henan Huanghe Whirlwind Co., Ltd.
Diamond MorphologyOctahedral—Single crystal habit
Diamond Particle Size70-80µmAverage radius ~37.5 µm
Silicon Purity>99.5%Reactive melt infiltration source
Ti Layer Thickness Range50-250nmDeposited via DC magnetron sputtering
Resultant TiC Layer Thickness52-255nmFormed via heat treatment and RMI
Optimal TiC Layer Thickness~154nmPerformance peak
Sputtering AtmosphereArgon—DC magnetron sputtering
Heat Treatment Temperature800°CArgon atmosphere, 1 h hold
Carbonization AtmosphereArgon—Debinding/pyrolysis
Carbonization Ramp Rate1°C/minHeating/cooling
RMI Vacuum Level10⁻³PaVacuum reactive melt infiltration
RMI Peak Temperature1500°CSilicon infiltration
RMI Dwell Time0.5hAt peak temperature
RMI Cooling to 800°C4°C/minControlled cooling rate
DLP Wavelength405nmUV projection source
DLP Layer Thickness50µmZ-axis slicing resolution
Photosensitive ResinHDDA + PPTTA + PPG-400—UV-curable matrix
Baseline Thermal Conductivity (0 nm TiC)417W/(m·K)Control sample
Peak Thermal Conductivity478W/(m·K)At 154 nm TiC
Baseline Flexural Strength (0 nm TiC)307MPaControl sample
Peak Flexural Strength342MPaAt 154 nm TiC
Thermal Conductivity Improvement14.6%Over baseline
Flexural Strength Improvement11.4%Over baseline
Diamond Thermal Conductivity (intrinsic)1500-2000W/(m·K)Literature reference
Acoustic Impedance - Diamond47.27 × 10⁶kg/(m²·s)AMM parameter
Acoustic Impedance - TiC32.01 × 10⁶kg/(m²·s)AMM parameter
Acoustic Impedance - SiC25.68 × 10⁶kg/(m²·s)AMM parameter
Maxwell-Eucken Predicted keff418-481W/(m·K)kd = 1800, Vf = 0.55
Representative Kapitza Resistance10⁻⁹ - 10⁻⁸m²·K/WHasselman-Johnson range
  • Substrate Preparation: MBD8 octahedral diamond (70-80 µm) cleaned via Ar ion beam to remove surface oxides prior to metallization.
  • Magnetron Sputtering: DC magnetron deposition (Denton Discovery 635) of Ti layers (50-250 nm) onto diamond particles under argon atmosphere, with profilometry verification (KLA-Tencor P-6).
  • Heat Treatment: Tube furnace (SK2-2-130, alumina tube ID 8 cm) at 800°C in argon to convert Ti to TiC via surface carbon reaction.
  • Slurry Formulation: Ball-mill for 8 h with 20 vol% pore-former (polystyrene, 10 µm), 60 vol% photosensitive resin, 2 wt% dispersant (Hypermer KD-1), followed by 0.5 h with 1 wt% photoinitiator (819) and 2 wt% thickener.
  • Stereolithography Printing: DLP module at 405 nm, 50 µm Z-axis slice thickness, layer-by-layer UV curing of green body.
  • Carbonization: Argon atmosphere, 800°C, 1 h dwell, 1°C/min ramp to produce porous Diamond/TiC/C intermediate.
  • Reactive Melt Infiltration: Vacuum (10⁻³ Pa), heat to 1500°C at 10°C/min, hold 0.5 h, cool to 800°C at 4°C/min, then natural cool to RT; molten Si reacts with residual Ti and fills pores.
  • Characterization Suite: XRD (Cu Kα, 40 kV/30 mA, 2°/min, 10-90° 2θ), SEM (HITACHI S4700), TEM (FEI Tecnai G2 F20) with FIB foil preparation (FEI Helios Nanolab 600i), EDS line scanning.
  • Performance Testing: Laser flash analysis (LFA 467 HyperFlash) for thermal diffusivity; three-point bending (Instron 5848 MicroTester) for flexural strength.
  • Applicable Materials:

    • MBD8-grade diamond particles (70-80 µm): The paper explicitly uses commercial MBD8 octahedral diamond. 6CCVD supplies equivalent polycrystalline diamond (PCD) powders and crushed particles in matching size distributions for thermal management composite fabrication.
    • Optical Grade SCD plates: For researchers pursuing single-crystal diamond as the reinforcement phase to exploit the upper-bound 1500-2000 W/(m·K) intrinsic conductivity, 6CCVD provides high-purity SCD wafers with Ra < 1 nm polishing.
    • Heavy Boron-Doped PCD (BDD): For extension studies evaluating electrical-thermal co-management in Diamond/TiC/SiC architectures, 6CCVD’s BDD variants enable additional functionality (electrochemical sensing, electrode integration).
  • Customization Potential:

    • Custom Diamond Geometries: 6CCVD offers PCD plates/wafers up to 125 mm and substrates up to 10 mm thick. For researchers seeking bulk Diamond/SiC prototypes beyond the powder-bed printing route used here, our in-house capabilities support direct diamond substrate supply for infiltration-based composite fabrication.
    • Ti Metalization & Interlayer Deposition: While the paper uses DC magnetron sputtering for Ti, 6CCVD provides internal metalization services (Ti, W, Au, Pt, Pd, Cu) directly onto diamond substrates—enabling custom Ti/TiC interlayer architectures for replication studies or alternative thickness optimization.
    • Laser Cutting & Shaping: For complex 3D-printed Diamond/TiC/SiC geometries requiring post-process machining or micro-channel definition, 6CCVD’s precision laser cutting ensures dimensional fidelity.
    • Thickness Control: SCD and PCD thicknesses from 0.1 µm to 500 µm enable tailored substrate specifications matching the Diamond/TiC interface requirement for coherent/semi-coherent bonding studies.
  • Engineering Support:

    • In-House PhD Team: 6CCVD’s materials science specialists can assist with diamond grade selection (MBD8 vs. MBD6 vs. MBD4), particle size optimization, and metalization stack design for thermal management composite research.
    • Acoustic Impedance Matching Guidance: For projects extending the acoustic-mismatch-model framework demonstrated here, our team can advise on TiC alternative interlayers (SiC, Cr₃C₂, B₄C) and predict interfacial thermal resistance (Kapitza) based on diamond-matrix impedance contrast.
    • 3D Printing Feedstock Consultation: We support clients transitioning between vat photopolymerization routes and traditional powder metallurgy by supplying diamond powders with controlled surface chemistry for slurry or SPS processing.
  • Call to Action: For custom specifications or material consultation, visit 6ccvd.com or contact our engineering team directly.

View Original Abstract

Diamond-reinforced silicon carbide (Diamond/SiC) composites, with their exceptional thermal conductivity and mechanical properties, are considered ideal packaging materials for high-power-density and highly integrated electronic devices.However, their fabrication challenges and insufficient interfacial performance, particularly interfacial defects caused by acoustic and lattice mismatches, significantly limit further performance improvements.To address these issues, this study utilized stereolithography-based 3D printing technology to achieve rapid and precise material shaping, combined with magnetron sputtering to introduce a Ti layer, followed by reactive infiltration to fabricate Diamond/TiC/SiC composites.Advanced characterization techniques, including scanning electron microscopy, transmission electron microscopy, and energy-dispersive spectroscopy, were employed to systematically analyze the effect of TiC interlayer thickness on the interfacial structure and composite performance.The results revealed that the introduction of the TiC interlayer formed a quasi-coherent interface with good lattice matching between diamond and SiC, effectively reducing acoustic mismatch and interfacial dislocation density, thereby significantly enhancing interfacial performance.The thermal conductivity and flexural strength of the composites exhibited a trend of initial increase and subsequent decrease with increasing TiC interlayer thickness.When the TiC layer thickness reached 154 nm, the thermal conductivity and flexural strength achieved maximum values of 478 W/(mK) and 342 MPa, respectively, representing improvements of 14.6 % and 11.4 % compared to composites without the TiC interlayer.This study proposes a strategy to enhance the overall performance of composites by constructing quasi-coherent interfaces, optimizing interfacial bonding, and mitigating acoustic mismatch, providing valuable theoretical and technical guidance for the interfacial design of Diamond/SiC composites and the development of high-performance thermal management materials.