Skip to content

Electrochemical Reduction of CO2 Using Polycrystalline Phosphorus-Doped Diamond Electrode

MetadataDetails
Publication Date2026-01-02
JournalCatalysts
AuthorsTomokiyo Moriguchi, Yasuaki. Einaga
InstitutionsSuzuki (Japan), Keio University
AnalysisFull AI Review Included

Technical Documentation: Electrochemical Reduction of CO₂ Using Phosphorus-Doped Diamond Electrodes

Section titled “Technical Documentation: Electrochemical Reduction of CO₂ Using Phosphorus-Doped Diamond Electrodes”
  • Core Innovation: Phosphorus-doped polycrystalline diamond (PDD) electrodes fabricated via MPCVD suppress the competing hydrogen evolution reaction (HER) more effectively than conventional boron-doped diamond (BDD) at highly cathodic potentials (< −1.8 V vs. RHE).
  • High Faradaic Efficiency: PDD achieved a 70% maximum Faradaic efficiency (FE) for formic acid (HCOOH) at −2.0 V vs. RHE in 0.5 M KCl, surpassing the 66% FE obtained with BDD.
  • Selectivity Breakthrough: The HCOOH/H₂ ratio reached ~8.9 at −2.2 V on PDD, with sustained high selectivity down to −2.6 V, whereas BDD became HER-dominated at the same potentials.
  • Electrolyte Versatility: In 0.1 M KClO₄, PDD shifted selectivity toward carbon monoxide (CO) production while suppressing H₂ evolution, unlike BDD.
  • Mechanism: Suppression of HER is driven by the n-type semiconductor properties of PDD (flat-band potential ≈ −2.9 V vs. RHE), which limits proton-coupled electron transfer under cathodic polarization.
  • Wide Potential Window: PDD exhibits a 4.8 V electrochemical window in 0.1 M HClO₄ compared to 3.4 V for BDD.
  • Implication: PDD offers a viable pathway to higher current-density CO₂ electrolyzers without sacrificing product selectivity.

ParameterValueUnitContext
Phosphorus concentration (SIMS)7.8 × 10¹⁹atoms/cm³Bulk doping level in PDD film
Carrier density (PDD)1.9 × 10¹⁸cm⁻³Calculated via Mott-Schottky
Carrier density (BDD)5.3 × 10¹⁹cm⁻³Reference electrode comparison
Flat-band potential (PDD)≈ −2.9V vs. RHEn-type semiconductor behavior
Flat-band potential (BDD)≈ 1.7V vs. RHEp-type semiconductor behavior
Potential window (PDD)4.8VIn 0.1 M HClO₄ at 250 µA/cm² threshold
Potential window (BDD)3.4VSame measurement conditions
Peak-to-peak separation ∆Ep (PDD)0.53VRu(NH₃)₆³⁺/²⁺ redox probe
Peak-to-peak separation ∆Ep (BDD)0.11VSame redox probe
Max FE - Formic acid (PDD)70%At −2.0 V vs. RHE, 0.5 M KCl
Max FE - Formic acid (BDD)66%Same conditions
HCOOH/H₂ ratio (PDD)~8.9—At −2.2 V vs. RHE
Tafel slope - HCOOH (PDD)556mV/decPotential range −1.2 to −1.8 V
Tafel slope - HCOOH (BDD)361mV/decSame range
Tafel slope - H₂ (PDD)1850mV/decPotential range −1.6 to −2.4 V
Tafel slope - H₂ (BDD)461mV/decSame range
Exchange current density j₀ - HCOOH (PDD)1.2 × 10⁻⁸A/cm²Apparent kinetic parameter
Exchange current density j₀ - HCOOH (BDD)6.3 × 10⁻⁹A/cm²Apparent kinetic parameter
Exchange current density j₀ - H₂ (PDD)4.2 × 10⁻⁷A/cm²Reflects space-charge limitation
Exchange current density j₀ - H₂ (BDD)2.8 × 10⁻⁸A/cm²Intrinsic HER kinetics
Charge-transfer coefficient α - HCOOH (PDD)0.053—Tafel-derived
Charge-transfer coefficient α - H₂ (PDD)0.016—Indicates charge-depletion control
sp²/sp³ Raman peak intensity ratio (PDD)0.45—Indicates non-diamond carbon content
Grain size~1µmSEM morphology
Dominant facet(111)—Polycrystalline surface
Diamond Raman peak shift1332 → 1331.6cm⁻¹Lattice distortion from P doping
CO₂ flow rate during electrolysis< 13mL/minMaintains saturation
N₂ purge rate (deoxygenation)200mL/min15 min pre-treatment
CO₂ saturation flow rate250mL/min15 min pre-treatment

  • Substrate Preparation:
    • Φ20 mm silicon substrate, polished with 0.2 µm diamond powder, ultrasonically cleaned in methanol.
  • MPCVD Nucleation Stage:
    • Gas mixture: CH₄:H₂ = 0.5:200 sccm.
    • Pressure: 50 torr.
    • Microwave power: 0.6 kW.
    • Substrate temperature: 700°C.
    • Duration: 30 min.
  • MPCVD Deposition Stage:
    • Gas mixture: CH₄:H₂ = 0.5:500 sccm.
    • Pressure: 75 torr.
    • Microwave power: 1.0 kW.
    • Substrate temperature: 930°C.
    • Duration: 8 h.
    • Phosphorus source: Red phosphorus sublimed via ceramic heater at 390°C.
  • Surface Termination:
    • Oxygen-terminated surface achieved by 254 nm UV (low-pressure Hg lamp) irradiation for 60 min.
  • Electrochemical Cell Configuration:
    • Two-compartment batch cell separated by Nafion NRE-212 membrane.
    • Catholyte: 0.5 M KCl (CO₂-saturated).
    • Anolyte: 0.5 M KOH.
    • Reference: Ag/AgCl (saturated KCl); Counter: Pt wire.
  • Potential Window Determination:
    • CV in 0.1 M HClO₄ at 0.1 V/s; window defined at ±250 µA/cm².
  • Electrochemical Reduction Protocol:
    • Applied potentials from −1.4 to −2.6 V vs. RHE.
    • Products quantified by HPLC (liquid) and GC (gas).
  • Impedance Spectroscopy:
    • Mott-Schottky analysis at 500 Hz, 10 mV AC amplitude in 0.1 M HClO₄.
    • EIS for charge-transfer resistance (Rct) in 0.5 M KCl under CO₂-saturated and CO₂-free conditions.

Applicable Materials:

  • Heavy Phosphorus-Doped PCD (PDD): Directly relevant for replicating or extending this work. 6CCVD’s MPCVD capabilities support controlled P incorporation using solid-source or gas-phase dopant precursors, enabling carrier densities in the 10¹⁸-10¹⁹ cm⁻³ range.
  • Boron-Doped Diamond (BDD): Available at 0.1% and higher boron concentrations (up to 10²⁰ cm⁻³ and beyond) for p-type reference and baseline electrochemical electrodes.
  • Optical / Electronic Grade SCD: Available for fundamental semiconductor studies (Mott-Schottky, band structure) where grain-boundary effects must be excluded.
  • Substrate-Scale PCD: Polycrystalline diamond grown on Si, Mo, or other refractory substrates up to 125 mm diameter, accommodating the Φ20 mm geometry demonstrated here and scaling to larger-format electrolyzer electrodes.

Customization Potential:

  • Doping Concentration Tuning: Precise control of P or B incorporation to target specific carrier densities, flat-band potentials, and potential window widths.
  • Custom Film Thickness: Diamond layers from 0.1 µm to 500 µm (SCD/PCD) and up to 10 mm substrates available to balance mechanical durability and electrochemical surface area.
  • Laser Cutting & Shaping: Free-standing or supported diamond electrodes can be laser-cut to custom geometries (rectangular, annular, mesh) for flow-cell and zero-gap electrolyzer architectures.
  • Metalization Options: Ti, Pt, Au, Pd, W, and Cu metallization provided in-house to ensure low-ohmic back-contacts critical for highly cathodic operation. The Ag/AgCl or Pt counter-electrode interfaces demonstrated here can be supplied with tailored bond-pad layouts.
  • Surface Termination Engineering: Controlled oxygen or hydrogen termination as required for electrochemical double-layer tuning.

Engineering Support:

  • 6CCVD’s in-house PhD team can assist with material selection, dopant-concentration targeting, and electrode geometry design for CO₂ reduction reactor (CO₂RR) projects — from laboratory-scale three-electrode cells to pilot-scale flow electrolyzers.
  • Consultation available on interpreting Mott-Schottky data, optimizing Tafel behavior, and suppressing HER through semiconductor band engineering.
  • Collaborative support for sp²/sp³ ratio control and Raman-based quality assessment of diamond electrodes.

Call to Action:

For custom specifications or material consultation, visit 6ccvd.com or contact our engineering team directly.

View Original Abstract

In this study, we investigated the electrochemical reduction of carbon dioxide (CO2) using a phosphorus-doped polycrystalline diamond (PDD) electrode and compared it with a conventional boron-doped diamond (BDD) electrode. In the reduction reaction of CO2 in a 0.5 M KCl aqueous solution, the PDD electrode showed high selectivity for formic acid production over a wide potential range. This tendency was particularly evident at potentials below −1.8 V (vs. RHE). Moreover, at more negative potentials of −2.4 V and −2.6 V, formic acid remained the dominant product, while hydrogen evolution was the main reaction on the BDD electrode at the negative potentials. Similarly, in electrochemical reduction using an 0.1 M KClO4 aqueous solution, carbon monoxide was confirmed to be a major product, and hydrogen generation was effectively suppressed in a more negative potential range. In other words, PDD is a promising electrode material that can efficiently convert CO2 into valuable chemicals while suppressing hydrogen evolution, even in negative potential regions.

  1. 2022 - Solar fuels: Research and development strategies to accelerate photocatalytic CO2 conversion into hydrocarbon fuels [Crossref]
  2. 2015 - Recent Advances in the Catalytic Preparation of Cyclic Organic Carbonates [Crossref]
  3. 1994 - Electrocatalytic process of CO selectivity in electrochemical reduction of CO2 at metal electrodes in aqueous media [Crossref]
  4. 2022 - Application of Boron-doped Diamond Electrodes: Focusing on the Electrochemical Reduction of Carbon Dioxide [Crossref]
  5. 2024 - Recent Progress on Boron-Doped Diamond Electrodes for Electrochemical CO2 Reduction: A Mini-review [Crossref]
  6. 2018 - Stable and Highly Efficient Electrochemical Production of Formic Acid from Carbon Dioxide Using Diamond Electrodes [Crossref]
  7. 2021 - Enhancing the Electrochemical Reduction of CO2 by Controlling the Flow Conditions: An Intermittent Flow Reduction System with a Boron-Doped Diamond Electrode [Crossref]
  8. 2025 - Semipermanent Continuous Formic Acid Production from CO2 by Controlling Ion Transport Using Boron-Doped Diamond Electrodes [Crossref]
  9. 2024 - Unveiling the microstructure and promising electrochemical performance of heavily phosphorus-doped diamond electrodes [Crossref]
  10. 2015 - Electrochemical properties of phosphorus doped diamond [Crossref]