Skip to content

Machine learning analysis of oscillatory-turbulent heat transfer using carbon-based diamond nanofluids over MHD nonlinear wavy surfaces

MetadataDetails
Publication Date2026-01-01
JournalSustainable Carbon Materials
AuthorsDanial Habib, Caiyan Qin, Yue Yang, Mingming Zhang, Yuting Guo
InstitutionsHarbin Institute of Technology, Kyoto University
AnalysisFull AI Review Included
  • Objective: Comprehensive numerical and machine-learning analysis of oscillatory heat transfer and turbulent flow dynamics using diamond-water nanofluids over nonlinear wavy surfaces under magnetohydrodynamic (MHD) effects.
  • Key Material Insight: Nanodiamonds (20-50 nm) provide ultra-high thermal conductivity (1,000 W/m·K) and exceptional chemical stability, making them ideal for high-precision thermal management.
  • Methodology: Similarity-transformed governing equations solved using the Keller-Box method (KBM) with second-order accuracy, validated via Artificial Neural Networks (ANN) achieving MSE ≈ 10−7.
  • Performance Finding: Aggregated nanoparticle configurations (ANP) enhance thermal performance by increasing the Nusselt number (Nu) by up to 30%, despite a 25% increase in viscous dissipation and skin friction (Cf).
  • Geometric Effect: Surface undulations induce oscillatory thermal dynamics and turbulent mixing structures, reducing overall Nu by 15%-20% due to boundary layer discontinuity.
  • Optimization: Optimal performance identified at 2%-3% nanoparticle volume fraction and moderate magnetic field strengths (M = 2.3-3.4), balancing thermal enhancement with pumping power requirements.
  • Application Target: Advanced thermal management for electronics cooling, aerospace systems, and high-performance heat exchangers.

ParameterValueUnitContext
Base FluidPure Water-Carrier medium for nanofluids
Nanoparticle MaterialDiamond (SCD)-20-50 nm size range, >95% purity
Thermal Conductivity (Nanodiamond)1,000W/m·KUltra-high thermal performance
Density (Nanodiamond)3,510kg/m3Solid phase property
Specific Heat Capacity (Nanodiamond)497.26J/kg·KSolid phase property
Dynamic Viscosity (Base Fluid)0.000803Pa·sWater at reference temperature
Density (Base Fluid)997.1kg/m3Water reference
Specific Heat Capacity (Base Fluid)4,179J/kg·KWater reference
Magnetic Field Strength (M)1.0 - 5.0dimensionlessMHD effect parameter
Sinusoidal Waviness (εT)0.1 - 0.3dimensionlessSurface undulation amplitude
Nanoparticle Volume Fraction (ϕ)2% - 3%%Optimal thermal/hydrodynamic balance
Prandtl Number (Pr)0.62dimensionlessFluid property
Convergence Criterion (KBM)δ
ANN Training Split70/15/15%Train/Validation/Test
ANN Best MSE≈ 10−7-Aggregated scenarios, Scenario I-B
Grid Resolution1,600 × 200elementsComputational domain discretization
Nusselt Number Enhancement (ANP)~30%Aggregated vs. non-aggregated
Nusselt Number Enhancement (NANP)~22%Non-aggregated configuration
Viscous Dissipation Penalty~25%Cost of aggregation
Heat Transfer Reduction (Waviness)15 - 20%Due to boundary layer discontinuity

  1. Problem Formulation: Derivation of a governing flow model using similarity transformations for oscillatory MHD flow over vertical nonlinear wavy surfaces.
  2. Nanofluid Property Modeling:
    • Application of classical Maxwell and Brinkman models for effective thermophysical properties.
    • Implementation of fractal-based models to capture nanoparticle clustering, irregular geometries, and nanolayer effects.
    • Accounting for interfacial resistance, cluster diameter, and nanolayer thickness for nanoscale confinement.
  3. Numerical Solution (KBM):
    • Transformation of higher-order PDEs to first-order systems via variable substitution.
    • Discretization using central differences with step sizes ∆η = ∆ξ = 0.005.
    • Linearization of algebraic equations via Newton’s method.
    • Solution of the linear system through block tridiagonal elimination.
  4. Machine Learning Validation (ANN):
    • Feedforward network architecture: input layer (M, εT), one hidden layer (10 neurons, tanh activation), output layer (Nu, Cf).
    • Training algorithm: Levenberg-Marquardt backpropagation.
    • Overfitting prevention via premature stopping based on validation error.
  5. Grid Independence Study: Progressive mesh refinement from 100 × 10 to 1,600 × 200 elements, confirming grid independence at differences < 0.0001%.
  6. Scenario Construction: Systematic variation of M (1.0-3.0) and εT (1.0-3.0) across aggregated (ANP) and non-aggregated (NANP) configurations.

  • Applicable Materials:

    • For experimental validation of this computational study, Optical Grade Single Crystal Diamond (SCD) or High-Purity Polycrystalline Diamond (PCD) powders/nanoparticles are required to accurately model the 1,000 W/m·K thermal conductivity assumption.
    • Boron-Doped Diamond (BDD) may be considered for modified studies investigating electrical conductivity effects under MHD conditions.
    • Diamond substrates (up to 10mm thickness) are available for fabricating model test surfaces that replicate the nonlinear wavy geometries used in this simulation.
  • Customization Potential:

    • The paper’s wavy surface geometry (εT = 0.1-0.3) can be physically realized using 6CCVD’s custom diamond deposition and laser cutting services to produce precisely undulated test specimens.
    • For experimental heat transfer validation setups requiring embedded sensors or electrodes, 6CCVD offers custom metalization (Au, Pt, Pd, Ti, W, Cu) with in-house capability for thin-film deposition on diamond substrates.
    • Polishing services (Ra < 1nm for SCD, < 5nm for inch-size PCD) ensure surface finish quality critical for accurate boundary layer characterization.
  • Engineering Support:

    • 6CCVD’s in-house PhD engineering team can assist with material selection for advanced thermal management projects, including nanofluid formulation guidance and diamond substrate specification for heat exchanger prototyping.
    • Consultation is available for integrating MPCVD diamond components into aerospace cooling systems, power electronics thermal interfaces, and high-performance heat exchanger designs.
  • Call to Action: For custom specifications or material consultation, visit 6ccvd.com or contact our engineering team directly.

View Original Abstract

This study presents a comprehensive numerical analysis of the oscillatory heat transfer and of turbulent-flow dynamics of carbon-based diamond-water nanofluids on a vertical nonlinear wavy surface under magnetohydrodynamic (MHD) effects. The work highlights the pivotal role of nanodiamonds, a class of carbon nanomaterial characterized by ultra-high thermal conductivity (1,000 W/m·K) and exceptional stability, in enhancing thermal performance. The resulting governing flow model, derived using similarity transformations, is solved by the Keller-box method (KBM) and validated with exceptional accuracy (MSE ≈ 10<sup>−7</sup>) using an artificial neural network (ANN) for machine learning (ML). Aggregated (ANP) and non-aggregated nanoparticle (NANP) configurations are systematically studied under the rising magnetic field strengths (M = 1.0-5.0) and sinusoidal conditions ($ {\varepsilon }_{T} $= 0.1-0.3). The results show that the formation of ANPs leads to a substantial increase in thermal conductivity due to the formation of conductive clusters, which increase the Nusselt number Nu by 30%, albeit at the considerable cost of a 25% increase in viscous dissipation and skin friction <italic>C<sub>f</sub></italic>. Conversely, non-aggregated nano-diamonds promote smooth velocity profiles that yield moderate enhancement in <italic>Nu</italic> (up to 22%) and high hydrodynamic functionality. Surface undulations generate oscillatory thermal dynamics and turbulent mixing structures, resulting in a 15%-20% reduction in the overall Nu due to boundary layer discontinuity. However, this negates the reduction resulting from the increase in overall thermal bridging. An optimal nanoparticle volume fraction <italic>C<sub>f</sub></italic> of 2%-3% is identified, balancing the thermal enhancement against the pumping power requirements. These results provide important design insights for advanced thermal management systems, especially in the cooling of electronics and high-performance heat exchangers, where magnetic field control and surface geometry optimization are critical for operational efficiency.