Skip to content

Multielectrode Advanced Oxidation Treatment of Tannery Wastewater - Mass Transfer Characterization, Process Performance, Kinetic Modeling, and Energetic Analysis

MetadataDetails
Publication Date2026-01-06
JournalProcesses
AuthorsNiswah Nafiat, Mohd Usman Mohd Junaidi, M. A. A. Hussain, Mohamad Fairus Rabuni, Adeline Seak May Chua
InstitutionsUniversity of Malaya
Citations1
AnalysisFull AI Review Included
  • Application: Multi-electrode electro-oxidation (EO) of simulated tannery wastewater containing recalcitrant tannic acid (1 g/L), targeting high-load recalcitrant pollutant degradation.
  • Anode Champion: Boron-doped diamond (BDD) on silicon substrate outperformed mixed-metal oxide (MMO, Ti/Ru-Ir) across all metrics for organic removal, achieving 98% TOC removal (~500 mg/L reduced to 12.44 mg/L).
  • Optimal Configuration: Three electrode pairs (BDD anode + stainless steel cathode) operated at 4 mA/cm2 delivered the best balance of degradation efficiency and energy consumption.
  • Mass Transfer: Measured mass transfer coefficients (km) ranged from 4.15 to 5.18 × 10−6 m/s, with the widest electrochemical potential window observed for BDD-SS pairings (OER onset at 3.273 V/VSHE).
  • Kinetic Behavior: Mixed zero-order and pseudo-first-order kinetics governed pollutant decay, with BDD-SS exhibiting k0 of 1.660 mg/L·min at 4 mA/cm2, confirming mass transfer limitations emerge above this threshold.
  • Energy Trade-off: BDD systems consumed more energy (84.6 kWh/m3 at 4 mA/cm2) than MMO (27.40 kWh/m3), yet proved more energy-efficient when normalized to degradation performance.
  • Key Insight: Cathode material plays a secondary role; the anode governs hydroxyl radical (•OH) generation efficiency and ultimately determines recalcitrant compound mineralization rates.
ParameterValueUnitContext
Reactor Volume2LPolyacrylic vessel, 13 × 17 × 13 cm3 internal
Electrode Dimensions100 × 150mm2Per electrode plate
BDD Coating Thickness10-20µmDouble-sided Si/BDD substrate
MMO Coating Thickness8µmTi substrate, 8:2 Ru-Ir ratio
Interelectrode Gap1cmParallel arrangement, 3 pairs
Current Densities Tested2, 4, 6mA/cm2Corresponding to 1, 2, 3 A
Total Electroactive Area500cm2Three pairs combined
Mass Transfer Coefficient (km)4.15-5.18 × 10−6m/sDetermined via ferrocyanide oxidation
OER Onset (BDD-SS)3.273V/VSHEWidest anodic window
OER Onset (MMO-G)1.325V/VSHENarrowest anodic window
TOC Removal (BDD-SS, 4 mA/cm2)98%489 → 12.44 mg/L
Ammonium Removal (BDD-SS)100%720 mg/L initial
Chloride Removal (BDD-SS, 6 mA/cm2)61.90%Highest for BDD configuration
Energy Consumption (BDD-SS, 4 mA/cm2)84.6 ± 5.94kWh/m3Over 8 h treatment
Energy Consumption (MMO-SS, 4 mA/cm2)27.40 ± 0.85kWh/m3More economical baseline
Operational Cost (BDD-SS, current supplier)649.40USD/m3Includes electrode amortization
Operational Cost (MMO-SS)91.42USD/m3Lowest cost configuration
BDD Electrode Price (current)400USD/pieceBoromond supplier
MMO Electrode Price30USD/pieceGeerwork supplier
Kinetic Rate k0 (BDD-SS, 4 mA/cm2)1.660mg/L·minZero-order phase
STW Initial pH4.29 ± 0.12—Acidic tannery mimic
STW Conductivity23.6 ± 0.9mS/cmAdjusted with Na2SO4
Initial TOC489 ± 77mg/LConservative high-strength
  1. Simulated Wastewater Preparation: Dissolved 1 g/L tannic acid (C76H52O46), 2 g/L NH4Cl, 7 g/L NaCl, and 8 g/L Na2SO4 in distilled water to replicate high-strength tannery effluent with elevated pollutant load for conservative assessment.
  2. Multi-Electrode Reactor Assembly: Three parallel electrode pairs (anode-cathode-anode-cathode-anode-cathode configuration) installed in polyacrylic vessel with 1 cm interelectrode gap, connected to ATTEN DC power supply.
  3. Current Density Selection: Tested 2, 4, and 6 mA/cm2 to map degradation efficiency against mass transfer thresholds and parasitic reaction onset.
  4. Electrode Material Comparison: Four pairings evaluated — MMO-SS, MMO-G, BDD-SS, BDD-G — to isolate anode and cathode contributions independently.
  5. Electrochemical Characterization: Cyclic voltammetry (CV) determined oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) onset potentials for each pairing.
  6. Mass Transfer Quantification: Limiting current technique using ferrocyanide/ferricyanide redox couple calculated km via Faraday’s law.
  7. Kinetic Modeling: Data fitted to zero-order, pseudo-first-order, and pseudo-second-order models; RMSE and R2 regression evaluated model accuracy.
  8. Analytical Monitoring: TOC/TN measured via Shimadzu TOC-V CSN; ion chromatography (Metrohm 861) tracked chloride, chlorate, perchlorate, and ammonium evolution.
  9. Energy and Cost Analysis: Specific energy consumption (kWh/m3) and operational cost (USD/m3) calculated across all configurations and current densities.

The findings strongly validate the deployment of Boron-Doped Diamond (BDD) electrodes as the premier anode material for recalcitrant wastewater treatment. For laboratories and engineering teams seeking to replicate or extend this research, 6CCVD recommends:

Application Requirement6CCVD Material Recommendation
High •OH radical generation, wide electrochemical windowHeavy Boron-Doped PCD (BDD) on silicon substrate
Cost-sensitive MMO alternative benchmarkingPolycrystalline Diamond (PCD) substrates with custom metalization
Long-duration industrial electrolysis (10+ year lifespan)Heavy Boron-Doped PCD with optimized sp2/sp3 ratio
Scalable reactor prototypingPCD plates up to 125mm diameter

Our MPCVD-grown BDD electrodes deliver the 10-20 µm coating thickness range demonstrated in this study, with precise boron doping control to optimize conductivity while maintaining the sp3 diamond phase responsible for the wide potential window (OER onset > 2.5 V/VSHE) observed in the BDD-SS configuration.

The paper highlights critical geometry and integration parameters that 6CCVD can accommodate:

  • Custom Plate Dimensions: While the study used 100 × 150 mm2 electrodes, 6CCVD supports custom dimensions for plates/wafers up to 125mm diameter in PCD configurations, enabling direct scale-up or modular reactor design.
  • Substrate Engineering: The Si/BDD architecture referenced in this paper mirrors 6CCVD’s standard silicon-substrate diamond growth process. Alternative substrates (Mo, W, Nb, Ti) are available for thermal expansion matching in high-current applications.
  • Coating Thickness Control: 6CCVD’s MPCVD reactors allow precise tuning of diamond film thickness (0.1-500 µm for SCD; 0.1-500 µm for PCD), enabling optimization between cost and service life.
  • Metalization Services: For researchers requiring Ti/Pt/Au contact layers or full-area conductive backing, 6CCVD offers in-house metalization with Au, Pt, Pd, Ti, W, and Cu — eliminating supply chain delays and ensuring metallurgical compatibility with the diamond surface.
  • Laser Cutting & Shaping: Custom electrode geometries beyond standard rectangular formats can be precision-cut to fit unique reactor architectures or multi-electrode array designs.
  • Surface Polishing: Ra < 5nm surface finishes available for polycrystalline diamond electrodes, reducing fouling and ensuring reproducible electroactive surface area measurements.

6CCVD’s in-house PhD-level materials science team provides direct consultation for:

  • Boron doping concentration optimization for specific current density windows (the 4 mA/cm2 sweet spot identified in this paper depends on carrier concentration tuning).
  • Cathode pairing recommendations — while the paper confirms SS outperforms graphite due to higher conductivity (1.33-1.45 × 106 S/m vs. 1.27-3.00 × 105 S/m), our engineers can advise on hybrid cathode architectures for electro-Fenton integration.
  • Mass transfer enhancement strategies through surface nanostructuring or 3D electrode geometries.
  • Cost-performance modeling — alternative electrode cost analysis (Table 3 in the paper) suggests sourcing optimization; 6CCVD’s global supply chain offers competitive pricing for high-volume BDD electrode orders.
  • Long-term stability testing protocols to validate the claimed 10-year service life under specific effluent chemistries.

For groups transitioning from laboratory validation (as in this 2 L reactor study) to pilot or industrial-scale electro-oxidation systems, 6CCVD provides:

  • Scalable electrode formats from lab-scale coupons to full reactor plates
  • Consistent quality control across production batches — critical for reproducible kinetic modeling
  • Documentation supporting electrode longevity claims for regulatory submissions
  • Flexible shipping arrangements (global DDU default, DDP available) to accommodate international research collaborations

Call to Action:

For custom specifications, electrode material consultation, or quotes on BDD/PCD electrodes tailored to electrochemical advanced oxidation research, visit 6ccvd.com or contact our engineering team directly.

View Original Abstract

Tannery wastewater from textile-related industries poses treatment challenges due to its high load of recalcitrant pollutants. Various advanced hybrid treatments, such as electro-oxidation (EO), have been proposed but mainly focus on electrode material development. Several studies on EO using multiple electrode pairs with large electroactive surface areas exist, however, none have reported on mass transfer characterization. This study addresses these gaps by investigating the electro-degradation performance of active (mixed-metal oxide, MMO) and non-active (boron-doped diamond, BDD) anodes paired with carbonaceous (graphite) and non-carbonaceous (stainless steel, SS) cathodes under applied current densities of 2 to 6 mA/cm2. A 2 L volume of simulated tannery wastewater containing recalcitrant tannic acid was treated using three electrode pairs with a total surface area of 500 cm2. Results showed optimal condition was identified at 4 mA/cm2 across all electrode combinations and better degradation using BDD anodes and SS cathodes, with total organic carbon (TOC) removed up to 500 mg/L (98% removal). Adopting the 3-electrode configuration, mass transfer coefficients ranged from 4.15 to 5.18 × 10−6 m/s. Energy consumption evaluation suggested MMO as a more cost-effective option, while BDD remained preferable for highly recalcitrant waste. Higher currents show diminishing returns due to mass transfer and parasitic reactions.

  1. 2022 - Tanneries impact on groundwater quality: A case study of Kasur city in Pakistan [Crossref]
  2. 2023 - Impact of different anode materials on electro-Fenton process and tannery wastewater treatment using sequential electro-Fenton and electrocoagulation [Crossref]
  3. 2023 - Tannery effluent treatment and its environmental impact: A review of current practices and emerging technologies [Crossref]
  4. 2022 - Tannery wastewater treatment: Conventional and promising processes, an updated 20-year review [Crossref]
  5. 2007 - Biodegradability of tannin-containing wastewater from leather industry [Crossref]
  6. 2019 - A review on occurrence, measurement, toxicity and tannin removal processes from wastewaters [Crossref]
  7. 2018 - Electrochemical oxidation remediation of real wastewater effluents—A review [Crossref]
  8. 2016 - Electrochemical technologies for wastewater treatment and resource reclamation [Crossref]
  9. 2006 - Electrochemical oxidation of organic pollutants for the wastewater treatment: Direct and indirect processes [Crossref]
  10. 2023 - Thin film microfluidic reactors in electrochemical advanced oxidation processes for wastewater treatment: A review on influencing parameters, scaling issues, and engineering considerations [Crossref]