Skip to content

Thermal Oxidation of Heavily Boron-Doped Microcrystalline Diamond Electrodes for Electrochemical Degradation of Tetracycline

MetadataDetails
Publication Date2026-01-01
JournalActa Physica Sinica
AuthorsJianyu Wang, Yilei Ren, Chengke Chen, Chao Chen, Kai Li
AnalysisFull AI Review Included

MPCVD Diamond for Advanced Applications: Technical Brief

Section titled “MPCVD Diamond for Advanced Applications: Technical Brief”
  • Application Focus: Single-crystal diamond (SCD) and polycrystalline diamond (PCD) are engineered to address extreme thermal, electronic, and optical demands in next-generation semiconductor and quantum systems.
  • Material Performance: Diamond’s wide bandgap, exceptional thermal conductivity, and chemical inertness enable operation in environments where conventional semiconductors degrade.
  • Fabrication Approach: Microwave Plasma Chemical Vapor Deposition (MPCVD) provides low-defect, high-purity diamond growth with precise control over doping and crystalline orientation.
  • Doping Capability: Controlled boron incorporation produces conductive diamond (BDD) for electrochemical and high-power electronic applications.
  • Geometric Versatility: Custom wafer dimensions, including plates up to 125mm, support scaling from research prototypes to production volumes.
  • Surface Quality: Sub-nanometer polishing (Ra < 1nm for SCD) enables integration into photonic, laser, and quantum-optic architectures.
  • Integration Support: In-house metallization (Au, Pt, Pd, Ti, W, Cu) and laser cutting reduce downstream processing complexity for engineering teams.
ParameterTypical ValueUnitContext
Bandgap5.47eVUV / deep-UV optoelectronics
Thermal Conductivity (SCD)1800 - 2200W/m·KHigh-power thermal management
Carrier Mobility (electron)~4500cm2/V·sHigh-frequency RF devices
Carrier Mobility (hole)~3800cm2/V·sPower electronics
Breakdown Field~10MV/cmHigh-voltage power devices
Boron Doping Range1018 - 1021cm-3BDD electrodes / superconductivity
SCD Thickness Range0.1 - 500µmThin membranes / bulk substrates
PCD Thickness Range0.1 - 500µmCutting tools / heat spreaders
Substrate ThicknessUp to 10mmMechanical / thermal mounting
Wafer Diameter (PCD)Up to 125mmPrototype → production scaling
SCD Surface Roughness (polished)< 1nm RaPhotonic / quantum interfaces
PCD Surface Roughness (polished)< 5nm RaOptical-grade polycrystalline
Microwave Frequency2.45GHzStandard MPCVD reactor
Substrate Temperature700 - 1100°CGrowth parameter
Chamber Pressure50 - 400TorrGrowth parameter
CH4 / H2 Ratio0.1 - 5%Carbon supersaturation control
Metallization OptionsAu, Pt, Pd, Ti, W, Cu—Ohmic / Schottky contacts
  1. Substrate Preparation: Select high-purity SCD or PCD seed; ultrasonic clean in organic solvents; rinse in deionized water; dry with N2.
  2. Reactor Loading: Mount seed on holder; evacuate chamber to base vacuum (< 10-6 Torr).
  3. Plasma Ignition: Introduce H2 at 100 - 500 sccm; ignite microwave plasma at 2.45 GHz.
  4. Growth Initiation: Introduce CH4 (0.1 - 5 % of H2 flow); stabilize substrate temperature at 700 - 1100 °C.
  5. Doping (Optional): Add B2H6 or trimethylboron for BDD layers; modulate flow for target resistivity.
  6. Deposition Phase: Maintain chamber pressure at 50 - 400 Torr; monitor growth rate (typically 0.1 - 10 µm/hr).
  7. Cool-Down: Reduce microwave power gradually; maintain H2 flow until temperature drops below 400 °C to prevent thermal shock.
  8. Post-Processing: Laser cut to geometry; polish to target Ra; apply metallization via sputtering or evaporation.
  • Applicable Materials:

    • Optical Grade SCD for research requiring low absorption, high coherence, and sub-nanometer surface finish.
    • Heavy Boron-Doped PCD for electrochemical electrodes, superconducting phases, and conductive heat spreaders.
    • Optical Grade PCD (up to 125mm) for scaling experiments that demand uniform polycrystalline films at larger formats.
    • Substrate-Grade CVD Plates for thermal management in high-power GaN-on-diamond or laser diode assemblies.
  • Customization Potential:

    • Geometry Control: Diamond plates and wafers are produced in custom dimensions up to 125mm (PCD) with thickness from 0.1µm to 500µm.
    • Metallization: In-house Ti/Pt/Au, W, Cu, Pd, and Pt metallization stacks support ohmic, Schottky, and brazing interfaces without subcontracting.
    • Laser Cutting: Net-shape or near-net-shape parts reduce dicing loss and mechanical stress on thin membranes.
    • Polishing: Double-side and single-side polish available to Ra < 1nm (SCD) and Ra < 5nm (PCD) for demanding optical or bonding interfaces.
  • Engineering Support:

    • 6CCVD’s in-house PhD team collaborates with researchers and OEMs on material selection, growth-parameter definition, and integration design for quantum sensing, power electronics, thermal management, and electrochemistry projects.
  • Call to Action:

    • For custom specifications or material consultation, visit 6ccvd.com or contact our engineering team directly.
View Original Abstract

采用热丝化学气相沉积法在单晶硅片上制备了重掺硼微晶金刚石(BDD)薄膜,并在空气中进行不同温度和不同时间的热氧化处理,系统研究了热氧化处理对BDD薄膜表面结构、电化学性能及四环素电化学降解性能的影响。结果表明,热氧化处理过程存在表面活化与结构损伤的强烈竞争关系。热氧化处理未改变样品重掺杂BDD的主要拉曼特征,但显著影响其表面形貌、润湿性和电化学行为。适度热氧化可有效去除表面及晶界处的非金刚石碳,改善晶面暴露,并引入适量含氧官能团,从而提高电势窗口、降低背景电流并优化界面反应条件;而过高温度或过长时间处理则会导致表面刻蚀加剧和结构退化,削弱电极性能。综合结构表征、电化学测试及污染物降解结果可知,700 ℃氧化处理30 min的BDD电极表现出相对最优的综合电化学性能和降解矿化能力,这主要归因于该条件下非金刚石碳去除、表面含氧官能团引入和结构完整性保持之间达到了良好的平衡。该电极反应3 h时四环素去除率达88.27%,9 h时实现完全去除;化学需氧量降至52.0 mg/L,矿化率高达94.47%。