Skip to content

A New Kind of Quantum Computer - Room-Temperature, Error-Resistant, and Scalable

FieldValue
JournalZenodo (CERN European Organization for Nuclear Research)
Published2026-02-21
AuthorsMichael Sarnowski
DOI10.5281/zenodo.18728093

The paper does not demonstrate a room-temperature, error-resistant, or scalable quantum computer. It proposes a notional 24-month test program for defect-spin architectures motivated by Holosphere Theory.

The strongest quantitative reference is an established NV-center baseline: room-temperature coherence times can reach the millisecond regime under favorable conditions. The paper cites isotopically purified samples and dynamical decoupling protocols for that benchmark.

The program tests a hypothesis rather than reporting new qubit performance.

The proposed “angular coherence qubit” is a defect-centered state variable whose usable behavior may depend on lattice symmetry, strain, and local arrangement. The author does not derive a complete microscopic model for an NV center.

No experimental dataset, qubit fidelity, logical error rate, or device throughput appears in the paper. Every performance claim in the title remains a hypothesis.

The paper explicitly rules out claims of immediate speed, superior fidelity, minimal correction overhead, or room-temperature scalability. Its scientific output is a set of predictions, controls, and falsifiers for separating structural effects from conventional defect-spin behavior.

Structural phase-locking is defined through stable, reproducible control parameters during repeated preparation, evolution, and measurement cycles. Relevant parameters include resonance frequency, fluorescence contrast, and coherence-time proxies.

The test asks whether engineered geometry changes recovery dynamics, directional transfer fidelity, or drift sensitivity. Engineered strain pathways, called “coherence corridors,” would create a directionally biased transfer path.

Pairs of NV centers test whether symmetric arrangements improve stability or relocking relative to asymmetric arrangements. Controlled microwave or optical perturbations then produce recovery curves for a defect returning to its operating point.

Passive stabilization means engineered symmetry or strain increases the region of control space that stays within declared tolerances. Active correction remains local rather than topological.

A triad can serve as a local geometry reference, so changes in inferred coupling or phase can trigger retuning. Redundancy can repeat encoding across a few defects or across cycles.

A calibrated microwave or optical pulse can restore the operating point after a controlled excursion. Recovery time and residual error must then be measured against perturbation strength and geometry.

The comparison must exceed conventional dipolar coupling, elastic coupling, and coupled-spin Hamiltonian descriptions. If standard models explain the observations, the structural-locking hypothesis is not supported in that platform.

The Holosphere lattice remains conceptual motivation rather than a measured physical structure.

Diamond serves as the validation platform, not as proof that the proposed qubit architecture can scale. NV centers in single-crystal diamond support room-temperature optical initialization and fluorescence readout.

The diamond lattice is mechanically rigid and chemically stable, which supports repeatable spin preparation, microwave manipulation, and fluorescence measurement. The author identifies cost and fabrication constraints as limits on large-scale diamond deployment.

Baseline work uses unmodified samples and negative controls with asymmetric layouts or no engineered strain paths. Defect creation uses implantation and annealing, or starts with vendor-provided samples.

Confocal microscopy and standard ODMR routines verify defect yield and addressability. Optical initialization and readout use a 532 nm laser, while a microwave source supplies driven control and ODMR.

An optional cryostat supports diagnostic runs for temperature-dependent noise separation. Low-temperature runs are diagnostic only; the main NV workflow can operate at room temperature.

Measured observables should include preparation, perturbation, recovery, fluorescence, drift rate, and residual error. Nitrogen and vacancies form the baseline NV defect, while boron remains a candidate engineering variable.

The roadmap treats each stage as a decision point. A reproducible signature supports continued work, while a null result ends that line of investigation.

MonthsExperimental stageRequired output
0 to 4Design and baseline controlsCandidate geometries, baseline metrics, and negative controls
4 to 6Defect creation and verificationConfocal imaging, ODMR, yield, and addressability
6 to 10Single-defect stability mapsPerturbation-recovery curves under matched conditions
10 to 16Small-array geometry testsSymmetric and asymmetric three-defect comparisons
16 to 24Engineered anisotropy testsDirection-dependent transfer and recovery results

During Months 6 to 10, each defect receives temperature modulation, applied strain, and magnetic-field noise injections within safe limits. During Months 10 to 16, triad-like and asymmetric three-defect layouts receive matched control sequences.

During Months 16 to 24, patterned strain or dopant pathways are compared with identical spacing without those pathways. The 24-month schedule is planning guidance, not a promise of schedule or outcome.

Scalability is a planning constraint because the control and readout infrastructure must keep each defect within its operating envelope. A 1 cm³ substrate with candidate sites spaced by 1 μm has (10⁴)³ = 10¹² potential locations.

A utilization factor of 10⁻² gives about 10¹⁰ candidate sites. This is a geometric upper bound, not a predicted qubit count.

Yield, optical and microwave access, routing, thermal management, and cross-talk reduce usable capacity. The paper avoids a specific qubit-count prediction because control fidelity, cross-talk, and stability have not been measured.

Claims of near 1:1 physical-to-logical ratios and minimal correction overhead are outside the proposed program. The paper instead treats small-array stability tests as the necessary first step toward any scaling discussion.

The cited defect-spin literature supplies the baseline for NV control and noise behavior. Diamond offers very high baseline maturity, strong established optical readout, and lower materials variability for high-purity samples.

Silicon carbide offers stronger long-term industrial scaling potential, but polytypes, background spins, and fabrication spread complicate early tests. It hosts multiple optically addressable defect families, including divacancies and transition-metal defects.

Diamond is therefore the falsification platform, while silicon carbide is the later translation target. Translation would proceed only after geometry-dependent signatures survive matched controls in diamond.

Conventional architectures isolate defects, calibrate controls, and apply error correction. The proposed test instead asks whether symmetry and strain reshape the operational envelope for selected perturbations.

It does not replace fault-tolerant quantum error correction or assume that structural locking removes conventional decoherence. The measurable advantage must appear as smaller drift, faster recovery, improved transfer stability, or fewer large corrective interventions.

Null results remain informative because they would show that standard models explain the tested behavior.

For diamond device engineering, the immediate requirement is a controlled validation platform, not procurement based on a claimed quantum advantage. Start with single-crystal diamond and mature NV optical and microwave control to establish conventional baselines.

Keep defect spacing, control sequences, and environment matched between engineered and reference layouts. Measure recovery time, residual error, drift, transfer fidelity, and stability before claiming error resistance.

Room-temperature operation applies to the proposed NV control and readout workflow. It does not prove that cryogenic requirements disappear for other defect platforms.

Material selection for an eventual scaled architecture should therefore follow measured geometry-dependent signatures. For now, single-crystal diamond is the defensible validation material, while silicon carbide remains contingent on reproducible results.

For the NV-center validation program, the paper needs MPCVD-grown single-crystal diamond as the starting plate for implantation, annealing, and later strain patterning. 6CCVD’s diamond materials catalog lists that material family, while the specified test geometries define the requirements for engineering support.

View Original Abstract

This paper presents an exploratory engineering hypothesis for defect-based quantum computing inspired by structural phase-locking concepts from Holosphere Theory. Rather than claiming improved performance or architectural superiority, the work proposes a disciplined experimental program to test whether geometry, engineered strain, and multi-defect arrangements measurably influence stability, recovery behavior, and coupling characteristics in solid-state spin platforms. Nitrogen-vacancy (NV) centers in single-crystal diamond are identified as a validation platform due to their mature control and readout infrastructure. The paper defines operational metrics such as locking basins, recovery curves, and geometry-dependent drift sensitivity, and outlines falsifier-grade experiments comparing symmetric and asymmetric defect configurations under controlled perturbations. The goal is to determine whether structural phase-locking provides measurable stabilization signatures beyond standard spin and strain-coupling models. No claims are made regarding improved error rates, scalability, or reduced correction overhead. Instead, the paper establishes a structured roadmap for evaluating whether geometry can reshape the operational envelope of defect-based qubits. Null results are treated as informative outcomes. If measurable geometry-dependent effects are observed, the same experimental discipline may later be translated to more scalable substrates such as silicon carbide.