EDEN Quantum Coherence at Room Temperature
Paper details
Section titled “Paper details”| Field | Value |
|---|---|
| Journal | Zenodo (CERN European Organization for Nuclear Research) |
| Published | 2026-10-30 |
| Authors | Florina L Uhrle |
| DOI | 10.5281/zenodo.23793231 |
The paper estimates a ground-state nuclear spin coherence time of minutes to hours at room temperature for a bonded ⁵⁶Fe/⁵⁷Fe pair in isotopically enriched ¹²C diamond. The estimate assumes graphene gating, a silica dielectric substrate, and active heat extraction. It is a model-based projection, not a reported room-temperature coherence measurement. The authors assign 40% confidence to T₂ exceeding minutes and 25% to T₂ exceeding hours. They give 85% confidence that the proposed system beats electronic qubits.
Coherence estimate and evidence level
Section titled “Coherence estimate and evidence level”The estimate combines nuclear structure, Mössbauer recoil physics, phonon coupling, and comparisons with other nuclear-spin systems. The 141 ns excited-state lifetime comes from textbook Mössbauer physics rather than EDEN device data. The minutes-to-hours T₂ is inferred from the absence of quadrupole coupling and from suppression of two-phonon Raman relaxation.
The paper does not present a coherence curve, sample count, error bar, or room-temperature T₂ measurement. Its central result is a proposed operating point. A device test would have to reproduce the isotope host, bonded pair, stack, and thermal condition together.
Nuclear spin design
Section titled “Nuclear spin design”The ⁵⁶Fe partner has I=0, μ=0, and Q=0. The ⁵⁷Fe nucleus has I=1/2 and a magnetic moment of 0.0904 μ_N. A spin-1/2 nucleus has zero quadrupole moment by angular momentum algebra, not by approximation. The ⁵⁷Fe quadrupole moment is therefore absent.
The authors use this symmetry to remove quadrupole-mediated phonon, strain, and electric-field-gradient coupling. Only magnetic dipole relaxation remains in their account. The ⁵⁶Fe partner is also magnetically invisible, so the pair forms an electronic spin-singlet ground state that adds no magnetic noise channel. Natural abundances are 91.75% for ⁵⁶Fe and 2.12% for ⁵⁷Fe. The proposal uses both as bonded isotopes rather than the natural mixture.
Diamond host and isotope purification
Section titled “Diamond host and isotope purification”The proposed host is CVD diamond enriched to 99.99% in ¹²C. Because ¹²C has nuclear spin I=0, the authors expect the enriched lattice to remove the host nuclear-spin bath. The paper calls this standard practice in the nitrogen-vacancy center field. It does not provide impurity measurements for the EDEN host.
During growth, the lattice would form around the ⁵⁶Fe/⁵⁷Fe pair rather than receive it by implantation. The authors contrast this with Czochralski silicon, where patterns are made after the boule is pulled.
The recoil calculation supports resonant Mössbauer operation. The 14.4 keV transition has about 2 meV free-atom recoil energy, while diamond has an about 160 meV Debye energy. This gives an approximately 80:1 ratio, and the authors say the recoil-free fraction approaches unity. None of these host or recoil values is reported as an EDEN specimen measurement.
Laser activation and heat removal
Section titled “Laser activation and heat removal”The electrical path is proposed as a laser-written channel through the diamond, graphene, and silica stack. The laser cuts through sheeting layers to reach the bonded pair. The authors say this cut is the first activation of the electrical pathway. They also describe the written channels as reconfigurable because the laser can write and rewrite them.
The proposal replaces copper-paste connections because the authors list paste degradation, thermal noise, cryogenic operation, and fixed routing as limitations of that approach.
Active thermal management extracts waste heat through patent-protected infrastructure. Its purpose is to lower phonon occupation and suppress two-phonon Raman relaxation. The paper gives no laser parameters, track geometry, heat-extraction rate, or temperature stability. It also says the completion layer for community-scale power distribution will be disclosed later.
Lifetime model and reference points
Section titled “Lifetime model and reference points”The model separates excited-state decay from ground-state storage. The ⁵⁷Fe excited state at 14.4 keV has a 141 ns T₁ and a 282 ns T₂ ceiling. The transition is an M1 line from 3/2⁻ to 1/2⁻. The authors attribute the lifetime limit to spontaneous M1 emission into vacuum rather than environmental decoherence. They reject a photonic bandgap at λ=0.86 Å because the required periodicity would fall below 0.43 Å, smaller than a chemical bond.
Ground-state relaxation is assigned to second-order two-phonon Raman processes through virtual electronic states. The authors argue that it is suppressed by the square of the phonon-to-gap energy ratio. The closed-shell singlet lies far from resonance, and active heat extraction reduces phonon occupation. These arguments produce the minutes-to-hours estimate.
The nearest comparison is ³¹P in ²⁸Si, with T₂ of tens of minutes at about 4 K. The paper also lists ⁸⁹Y in quiet oxides with minute-scale T₂ at cryogenic temperature. It claims the ⁵⁷Fe stack is comparable or superior at room temperature. The abstract says it exceeds known electronic qubits by orders of magnitude, but the confidence table gives that claim 85%.
Write, store, and read sequence
Section titled “Write, store, and read sequence”The write step excites ⁵⁷Fe with a 14.4 keV transition and accesses the state in 141 ns. The store step lets the nucleus relax into its I=1/2 ground-state memory. The read step re-excites the nucleus and detects the emitted radiation, also on the 141 ns scale.
The design uses the 141 ns transition as the access port and the estimated ground-state lifetime as the storage interval. That is the paper’s central architecture. The proposal therefore removes cryogenic cooling from the stated operating environment.
The resonant excitation and emission path must operate while the active thermal system suppresses relaxation. The paper does not report optical collection efficiency, emission count rate, background rate, or duty cycle. Those omissions prevent an assessment of usable read fidelity.
Engineering implications and unresolved issues
Section titled “Engineering implications and unresolved issues”The coherence claim applies to the complete proposed stack, not to diamond as a bulk material alone. Material selection would need to confirm ¹²C enrichment, control of the host nuclear-spin bath, incorporation of the bonded iron pair, and compatibility with graphene and silica interfaces. The paper does not specify the crystal form, iron concentration, or growth and implantation details well enough to reproduce the host.
A device engineer should separate the optical-access specification from the storage specification. The 141 ns timing rests on established Mössbauer physics, while the minutes-to-hours timing remains an estimate for the EDEN stack. The missing result is a room-temperature T₂ measurement under the proposed laser and thermal conditions.
The paper reports no control sample with a different partner isotope and no comparison with heat extraction disabled. Such controls would test whether the ¹²C host and active thermal management account for the proposed improvement.
The paper also projects 24.9 GJ/kg for the 14.4 keV excitation, about 540 times gasoline by mass, and proposes community-scale power modules. It gives no cycling test or module-level energy measurement. Neuroplastic AI is also presented as a future use, not a demonstrated device result. Until those data exist, minutes to hours should be treated as a design target rather than an achieved coherence time.
Materials and support
Section titled “Materials and support”The proposed device needs an isotopically enriched ¹²C diamond host containing the bonded ⁵⁶Fe/⁵⁷Fe pair, plus graphene gating, a silica dielectric, and an active heat-extraction path. The diamond materials catalog lists MPCVD-grown single-crystal and polycrystalline diamond plates and wafers, but the stated offering does not confirm ¹²C enrichment or bonded iron incorporation. Those material conditions should be checked through engineering support before a plate or wafer is selected for this application.
View Original Abstract
We present the case for room-temperature quantum coherence of the ⁵⁷Fe nuclear spin when held as a bonded ⁵⁶Fe/⁵⁷Fe pair in an isotopically enriched ¹²C diamond host lattice, with graphene gating and silica dielectric substrate.
Single Crystal Cvd Diamond Plate
View Specs →
Electronic Grade Intrinsic Diamond Epitaxial Wafer H Terminated Superior 100 Mosfet Ready Substrate
View Specs →