Efficient diamond Raman laser generating 65 fs pulses
At a Glance
Section titled “At a Glance”| Metadata | Details |
|---|---|
| Publication Date | 2015-06-04 |
| Journal | Optics Express |
| Authors | Michelle Murtagh, Jipeng Lin, Richard P. Mildren, Gail McConnell, David J. Spence |
| Institutions | Macquarie University, University of Strathclyde |
| Citations | 37 |
| Analysis | Full AI Review Included |
Executive Summary
Section titled “Executive Summary”- Core Achievement: Demonstration of a synchronously-pumped femtosecond diamond Raman laser generating 65 fs compressed pulses at 890 nm, a 30% reduction in pulse duration compared to prior work.
- Method: A Ti:Sapphire pump laser (796 nm, 194 fs, 80 MHz) was used to drive a ring-cavity Raman laser utilizing an 8 mm-long, Type IIa, CVD-grown single-crystal diamond with broadband AR coatings.
- Efficiency & Power: Achieved a 32% slope efficiency and a maximum first-Stokes output power of 820 mW, nearly doubling the output power of previous femtosecond diamond Raman implementations.
- Key Physical Mechanism: Efficient Raman conversion was driven by Stimulated Raman Scattering (SRS) combined with significant spectral broadening induced by Self- and Cross-Phase Modulation (SPM/XPM), enabling substantial pulse compression via a simple prism-pair.
- Material Advantage: The use of an AR-coated crystal cut along the [111] axis yielded approximately 30% higher Raman gain and a 55% lower threshold (0.74 W) compared to Brewster-cut [110] crystals.
- Cavity Detuning Tolerance: Operated over a broad 10 µm cavity detuning range, attributed to operating well above threshold and the reshaping capabilities of the 362 fs intracavity Stokes pulses.
- Future Outlook: The approach provides a phase-matching-free route to extend wavelength coverage of standard ultrafast sources, with potential for soliton-like pulse formation and cascaded Raman shifts reaching deeper into the near-infrared (up to 1270 nm).
Technical Specifications
Section titled “Technical Specifications”| Parameter | Value | Unit | Context |
|---|---|---|---|
| Pump Wavelength | 796 | nm | Ti:Sapphire pump source |
| Output (1st Stokes) Wavelength | 890 | nm | First-Stokes Raman shift |
| Raman Shift | 1332 | cm-1 | Single phonon mode of diamond |
| Slope Efficiency | 32 | % | Compared to 33% in prior [110] work |
| Maximum Stokes Output Power | 820 | mW | First-Stokes average power |
| Threshold Pump Power | 0.74 | W | Lower than the 1.65 W threshold of prior work |
| Pump Pulse Duration | 194 | fs | Ti:Sapphire pump (transform limit ~130 fs) |
| Output Stokes Pulse Duration | 362 | fs | Intracavity duration before compression |
| Compressed Stokes Pulse Duration | 65 | fs | Final duration after external prism-pair compression |
| Pulse Repetition Frequency | 80 | MHz | Synchronous pumping rate |
| Crystal Length | 8 | mm | Single-pass diamond gain medium |
| Crystal Orientation | [111] | Axis | Provides ~30% higher gain than [110] |
| Crystal Type | Type IIa, CVD-grown | - | Single-crystal diamond (SCD) |
| AR Coating Range | 796 - 1200 | nm | Broadband anti-reflection coating |
| Pump Focal Spot Radius (ω0) | 25 | µm | Focused into the center of the diamond |
| Cavity Mirror ROC | 200 | mm | Concave mirrors (M1, M2) |
| Beam Quality (M2) | 1.35 | - | TEM00 spatial mode |
| Cavity Detuning Range | 10 | µm | Operational tolerance |
| Intracavity Loss | 4.5 | % | Reduced from 5.5% via AR coating |
Key Methodologies
Section titled “Key Methodologies”- Material Selection: A single-crystal diamond (Type IIa, CVD-grown) was utilized to leverage the material’s exceptionally high Raman gain coefficient and large 1332 cm-1 frequency shift.
- Crystal Preparation: The diamond was cut along the [111] crystallographic axis to maximize gain, and polished with broadband AR coatings spanning 796 nm to 1200 nm to minimize intracavity loss.
- Pump Source: A mode-locked Ti:Sapphire laser was used to generate positively chirped 194 fs pulses at 796 nm with an 80 MHz repetition rate.
- Mode Matching & Focusing: The pump beam was polarized parallel to the [111] axis and focused through the input mirror to a waist radius of ω0 = 25 µm in the center of the diamond.
- Cavity Design: A four-mirror ring cavity (M1-M4) with two 200 mm ROC concave mirrors and two plane mirrors was constructed to achieve mode-matching and a round-trip time equivalent to the 80 MHz pulse train.
- Synchronous Pumping: The cavity length was precisely tuned (via translation of M4) to match the pump laser interpulse period.
- Pulse Compression: External compression of the broadened Stokes output was achieved using a standard prism-pair to compensate for the positive chirp induced by SPM and XPM.
- Numerical Modeling: A comprehensive model incorporating both SRS and nonlinear phase modulation (SPM/XPM) was developed to characterize the pulse evolution and validate the experimental observations.
6CCVD Solutions & Capabilities
Section titled “6CCVD Solutions & Capabilities”This research underscores the critical role of ultra-low-loss, high-purity single-crystal diamond in advancing ultrafast laser science. The following outlines how 6CCVD supports the engineering of such systems:
Applicable Materials
Section titled “Applicable Materials”- Optical Grade Single-Crystal Diamond (SCD): The 8 mm CVD-grown Type IIa crystal used in this study directly maps to 6CCVD’s high-purity SCD wafers and substrates. The extremely low lattice defect density and high optical transparency of our SCD are essential for maintaining the high gain and low intracavity loss (4.5% achieved here) required for efficient Raman conversion.
- Custom Crystal Lengths: The paper specifies an 8 mm crystal length. 6CCVD can supply SCD in custom dimensions and thicknesses to match specific cavity designs and mode-matching requirements.
- Ultra-Smooth Polishing: The sub-nanometer surface roughness required for low-loss AR coating deposition is achieved through 6CCVD’s precision polishing capabilities (Ra < 1nm for SCD), ensuring minimal scattering losses at the crystal interfaces.
Customization Potential
Section titled “Customization Potential”- Broadband Anti-Reflection (AR) Coatings: The paper utilized custom AR coatings spanning 796 nm to 1200 nm. While 6CCVD specializes in metallization (Au, Pt, Pd, Ti, W, Cu), our engineering team routinely collaborates with specialized optical coating partners to deliver fully characterized, custom-coated diamond components ready for integration into laser cavities.
- Custom Crystallographic Orientation: The [111] orientation utilized in this experiment provides a 30% gain enhancement over standard [110] cuts. 6CCVD offers custom laser cutting and orientation services, allowing the selection of specific crystallographic axes (e.g., [111]) to optimize the Raman gain coefficient for your specific pump polarization.
- Substrate Scaling: For higher average power operation where larger aperture crystals are required to manage thermal lensing, 6CCVD can provide SCD substrates with custom lateral dimensions.
Engineering Support
Section titled “Engineering Support”- PhD-Level Material Consultation: Designing a femtosecond Raman cavity requires precise control over material parameters. Our in-house PhD engineering team can assist with material selection, crystallographic orientation, and geometric specifications for similar ultrafast laser wavelength conversion and Raman shifting projects.
- Thermal & Optical Characterization: While this paper focuses on femtosecond pulse compression, scaling to higher powers introduces thermal management challenges. 6CCVD can provide guidance on crystal geometries that optimize heat extraction, leveraging the extreme thermal conductivity of our SCD material.
- Metallization for Hybrid Integration: For systems requiring intracavity heat spreaders or metallic mounts, our internal metallization capabilities (Ti, Au, Cu, etc.) ensure robust, low-stress bonding of diamond to heat sinks without compromising the optical aperture.
Call to Action
Section titled “Call to Action”For custom specifications, crystallographic orientation, or material consultation on your ultrafast or Raman laser development, visit 6ccvd.com or contact our engineering team directly.
View Original Abstract
We report a synchronously-pumped femtosecond diamond Raman laser operating at 890 nm with a slope efficiency of 32%. Pumped using a mode-locked Ti:Sapphire laser at 796 nm with a pulse duration of 194 fs, the bandwidth of the Stokes output was broadened to enable subsequent pulse compression to 65 fs using a prism-pair. Modelling results provide an understanding of the physical mechanisms involved in the Raman conversion of femtosecond pulses, supporting an in-depth characterization of these ultrashort pulsed lasers.