Electrically pumped random lasers with p-diamond as a hole source
At a Glance
Section titled “At a Glance”| Metadata | Details |
|---|---|
| Publication Date | 2015-06-12 |
| Journal | Optica |
| Authors | Yingjie Lu, Chongxin Shan, Zhenxiang Zhou, Yinglei Wang, Binghui Li |
| Institutions | Chinese Academy of Sciences, Jilin University |
| Citations | 15 |
| Analysis | Full AI Review Included |
Electrically Pumped Random Lasers with p-Diamond as a Hole Source — Technical Analysis
Section titled “Electrically Pumped Random Lasers with p-Diamond as a Hole Source — Technical Analysis”Executive Summary
Section titled “Executive Summary”- Core Breakthrough: Demonstration of the first electrically pumped random laser using boron-doped p-type diamond (hole concentration ≈ 3.6 × 1018 cm-3) as the hole-injection source, replacing notoriously difficult p-type ZnO.
- Active Heterostructure: p-Mg0.35Zn0.65O / n-ZnO core-shell nanowires — a bandgap-engineered architecture exploiting MgZnO as the hole-transport layer.
- Synthesis Route: p-diamond grown by temperature gradient method under high-pressure/high-temperature (HPHT) conditions (∼5.5 GPa, ∼1300 °C) with graphite (99.99%) carbon source.
- Lasing Performance: Threshold current ≈ 13 mA; emission centered near 380 nm (UV); multiple sharp, well-defined random-lasing peaks observed in the 375-395 nm range.
- Bandgap Engineering: Mg0.35Zn0.65O bandgap ≈ 4.36 eV vs. ZnO bandgap 3.37 eV, producing ΔEg ≈ 0.99 eV as a hole injection barrier offset.
- Significance: Establishes p-diamond as a viable wide-bandgap hole injector for next-generation UV optoelectronics — relevant to displays, biosensing, and on-chip random laser sources.
- Validation: Current-voltage characteristics and excitation-dependent spectral narrowing confirm coherent random-lasing action via electron-hole recombination.
Technical Specifications
Section titled “Technical Specifications”| Parameter | Value | Unit | Context |
|---|---|---|---|
| Diamond synthesis pressure | ∼5.5 | GPa | HPHT cubic anvil apparatus |
| Diamond synthesis temperature | ∼1300 | °C | Temperature gradient growth |
| Carbon source purity | 99.99 | % | Graphite precursor |
| Boron dopant concentration (diamond) | 3.6 × 1018 | cm-3 | p-type hole concentration |
| Diamond (111) XRD peak | 43.9 | ° (2θ) | Phase confirmation |
| Raman diamond peak | 1331 | cm-1 | sp3 carbon signature |
| Mg0.35Zn0.65O bandgap | ≈ 4.36 | eV | Derived (referenced paper value) |
| ZnO bandgap | 3.37 | eV | Direct bandgap |
| ΔEg (MgZnO - ZnO) | ≈ 0.99 | eV | Valence band offset for hole injection |
| Lasing threshold current | 13 | mA | Electrically pumped threshold |
| Operating current range | 13 - 35 | mA | Spectral evolution window |
| Peak emission wavelength | ≈ 380 | nm | UV random laser output |
| Spectral linewidth (above threshold) | < 1 | nm | Sharp peaks |
| Peak position drift | < 2 | nm | 375-380-385-390-395 nm panels |
| Turn-on voltage | ≈ 4 | V | I-V characteristic onset |
Key Methodologies
Section titled “Key Methodologies”- HPHT Diamond Synthesis
- Apparatus: Cubic anvil high-pressure system.
- Conditions: ∼5.5 GPa, ∼1300 °C; temperature gradient method.
- Precursor: 99.99% graphite + boron source.
- Diamond Characterization
- XRD → (111) reflection at 2θ ≈ 43.9° confirms crystalline cubic diamond.
- Raman spectroscopy → characteristic 1331 cm-1 sp3 peak verifies phase purity.
- Heterostructure Fabrication (p-Mg0.35Zn0.65O / n-ZnO)
- ZnO nanowire core grown (likely by CVD or vapor-phase route).
- MgZnO shell deposited conformally via a coating technique to form core-shell architecture.
- Device Assembly
- p-diamond brought into direct ohmic contact with p-MgZnO shell side of nanowire array.
- n-contact formed on ZnO core side; I-V curve recorded (turn-on ≈ 4 V).
- Optoelectronic Characterization
- Current-stepped electroluminescence (EL): 13, 14, 17, 18, 25, 30, 35, 40 mA.
- Spectral narrowing and emergence of sharp peaks above threshold confirms random lasing.
6CCVD Solutions & Capabilities
Section titled “6CCVD Solutions & Capabilities”Applicable Materials
Section titled “Applicable Materials”| Research Requirement | Recommended 6CCVD Product | Why It Fits |
|---|---|---|
| p-type diamond hole injector (≥ 3.6 × 1018 cm-3) | Heavy Boron-Doped PCD (BDD) or B-doped SCD | Boron-doped diamond from 6CCVD delivers tunable hole concentrations, suitable as hole-injection layers in wide-bandgap heterostructures. |
| Wide-bandgap transparent hole-transport substrate | Optical-Grade SCD (single crystal) | Low defect density, ultra-smooth surface, excellent for thin-film epitaxy of MgZnO / ZnO nanowires. |
| Bulk diamond backing / heat-spreading | Polycrystalline Diamond (PCD) Plates up to 125 mm | High thermal conductivity (≥ 1800 W/m·K) for thermal management of high-current UV emitters. |
| Wafer-format device fabrication | SCD/PCD Wafers, 0.1 - 500 µm thickness | Thickness flexibility supports thin-film hole-injector geometries and thicker free-standing carriers. |
Customization Potential
Section titled “Customization Potential”- Diamond Thickness Tailoring: For experiments targeting variable hole-injection efficiency, 6CCVD offers SCD and PCD films from 0.1 µm to 500 µm, enabling thickness-dependent series-resistance studies.
- Boron Concentration Engineering: Heavy/light doping gradients available across BDD product lines; we can help match hole concentration to your active-layer requirements.
- Custom Metalization: The paper’s device uses ohmic contacts to n-ZnO and p-MgZnO. For follow-up devices integrating p-diamond, 6CCVD’s in-house Ti / Pt / Au / Pd / W / Cu metalization enables robust low-resistance ohmic contacts and bond-pad patterns via photolithography or shadow masks.
- Laser Cutting & Dicing: Diamond substrates can be laser-scribed or diced to non-standard geometries to integrate with nanowire arrays grown on non-native substrates (Si, sapphire, etc.).
- Surface Preparation: Ra < 1 nm (SCD) and Ra < 5 nm (PCD) polishing levels support epitaxy-ready surfaces, critical for subsequent MgZnO / ZnO nanowire growth.
Engineering Support
Section titled “Engineering Support”- 6CCVD’s in-house PhD engineering team can assist with:
- Selecting B-doping levels for target hole concentrations (1016 - 1020 cm-3).
- Diamond surface termination (H-, O-, OH-) to optimize band alignment with MgZnO / ZnO.
- Thermal-budget guidance for integrating diamond with ZnO nanowire growth (typically < 900 °C).
- Metalization stack recommendations (e.g., Ti/Pt/Au for n-ZnO ohmic contacts; carbide-forming metallizations for p-diamond contacts).
Application Context: UV random lasers for displays, biological imaging, and on-chip speckle-free illumination sources.
> For custom specifications or material consultation, visit 6ccvd.com or contact our engineering team directly.
View Original Abstract
Electrically pumped lasing has been one of the most challenging issues for random lasers. Since holes are rare in most semiconductors, hole injection is necessary for electrically pumped lasers. Here in this article, by employing p-type diamond synthesized via a temperature gradient method under high-pressure and high-temperature conditions as a hole source, electrically pumped random lasing has been observed from p-Mg0.35Zn0.65O/n-ZnO core-shell nanowire structures. The mechanism for the lasing can be attributed to the recombination of the electrons in the nanowires with the holes injected from the p-type diamond.