Energy dispersive detector for white beam synchrotron x-ray fluorescence imaging
At a Glance
Section titled “At a Glance”| Metadata | Details |
|---|---|
| Publication Date | 2016-01-01 |
| Journal | AIP conference proceedings |
| Authors | Matthew D. Wilson, Thomas Connolley, Igor P. Dolbnya, Patrick S. Grant, Enzo Liotti |
| Institutions | Science and Technology Facilities Council, Rutherford Appleton Laboratory |
| Citations | 4 |
| Analysis | Full AI Review Included |
Executive Summary
Section titled “Executive Summary”- Technique: A “single-shot” white-beam synchrotron X-ray fluorescence (SXRF) imaging technique was demonstrated on the B16 beamline at Diamond Light Source, eliminating the need to scan monochromatic energies or raster a focused beam.
- Detector: The HEXITEC energy-dispersive imaging detector (CdTe, 80x80 pixels) was coupled with a 50 µm pinhole at 13 cm from the sample and the detector placed 2.3 m from the pinhole.
- Field of View & Resolution: Achieved a 1.1 x 1.1 mm2 field of view with each pixel imaging ~13 µm2; effective feature resolution 10-20 µm (limited by pinhole blur).
- Sample Matrix: Al-Cu alloy samples (200 µm thick) doped with Zr, Ag, and Mo, heated in a custom furnace to 560°C to study elemental redistribution during solidification.
- Performance: Element-specific fluorescence images acquired simultaneously in 60 s exposures; current bottleneck is fluorescence photon flux (<200 photons/pixel/min). High-flux beamlines and detector arrays could push imaging to a ~1 s timescale.
- Future Pathway: Plans to scale via butt-able HEXITEC modules (tiled 2x2 and 5x5 arrays with <2 pixel dead space) and to validate at the I12 beamline for higher energies and flux.
Technical Specifications
Section titled “Technical Specifications”| Parameter | Value | Unit | Context |
|---|---|---|---|
| Beamline | B16 (Diamond Light Source) | — | White-beam synchrotron source |
| Sample thickness | 200 | µm | Al-Cu alloy with Zr / Ag / Mo dopants |
| Sample temperature | 560 | °C | In-situ solidification furnace |
| Sample tilt (incident beam) | 45 | ° | Enables simultaneous transmission + fluorescence |
| Detector type | HEXITEC (CdTe) | — | Energy-dispersive, 80 x 80 pixel array |
| Pinhole diameter | 50 | µm | Projection aperture |
| Pinhole-to-sample distance | 13 | cm | Geometric magnification stage |
| Pinhole-to-detector distance | 2.3 | m | Defines magnification |
| Geometric magnification | ~17.7 | x | M = 230 / 13 |
| Field of view | 1.1 x 1.1 | mm2 | At highest magnification |
| Pixel-projected area | ~13 x 13 | µm2 | One detector pixel on sample |
| Effective feature resolution | 10-20 | µm | Pinhole-blur limited |
| Transmission camera scintillator | LYSO single crystal, 500 | µm | Mirror + lens to AVT Manta G125B CCD |
| Transmission integration time | 0.008 | s | Per radiograph frame |
| Fluorescence integration time | 60 | s | Per element map |
| Detected fluorescence flux | <200 | photons/pixel/min | Current limit |
| Detector capability (max count rate) | ~1000 | photons/pixel/s | Achievable with higher flux |
| Energy window - Zr Kα | 15-16 | keV | Element-specific integration |
| Energy window - Mo Kα/β | 17-20 | keV | Overlap with Zr Kβ at 17.7 keV |
| Energy window - Ag Kα/β | 21-25 | keV | Includes diffusion-rich zone |
| Energy window - Au L lines | 9-13 | keV | Mesh resolution test |
| Detector dead space (tiled arrays) | <2 | pixels | 2x2 and 5x5 modules demonstrated |
| Cu Kα self-absorption | Heavily attenuated at 8.0 keV | — | Cu matrix not visible in current geometry |
Key Methodologies
Section titled “Key Methodologies”- Sample preparation: Cast Al-Cu metal alloys doped with Zr, Ag, and Mo; sectioned to 200 µm thickness.
- Furnace design: Custom in-situ furnace with aperture in walls to permit transmitted white-beam imaging; sample positioned at 45° to the incident beam.
- Flood illumination: White-beam exposure from the B16 bending-magnet beamline (no monochromator, no focused spot).
- Transmission imaging arm: 500 µm thick single-crystal LYSO scintillator → mirror → lens → AVT Manta G125B CCD, integration 0.008 s.
- Fluorescence imaging arm: 50 µm pinhole at 13 cm from sample, HEXITEC detector at 2.3 m from pinhole; 90° geometry relative to sample.
- Heating protocol: Sample raised to 560 °C to drive diffusion/dissolution of dopants.
- Data acquisition: 60 s fluorescence integrations per energy window; transmission radiograph acquired simultaneously at 8 ms.
- Spectral processing: Per-pixel energy spectra summed in narrow keV windows to isolate Zr Kα, Mo Kα/β (with Zr Kβ subtraction), and Ag Kα/β.
- Image post-processing: 3x3 median filter applied to fluorescence maps to suppress pixel noise.
- Resolution validation: Au test mesh used to confirm ability to resolve 125 µm features through the 50 µm pinhole.
- Scaling pathway: Butt-able HEXITEC modules tiled (2x2 and 5x5) to enlarge field of view without sacrificing frame rate.
6CCVD Solutions & Capabilities
Section titled “6CCVD Solutions & Capabilities”-
Applicable Materials:
- Optical-Grade Single Crystal Diamond (SCD): Direct match for the LYSO scintillator role in the transmission arm. 6CCVD SCD is offered in thicknesses up to 500 µm with Ra < 1 nm polishing, providing a higher-Z, higher-radiopurity alternative to LYSO that is radiation-hard and thermally stable for synchrotron beamline environments.
- Polycrystalline Diamond (PCD) Wafers: For large-area detector windows or X-ray optical components where 6CCVD can deliver plates up to 125 mm with thicknesses from 0.1 µm to 500 µm — ideal for tiling applications analogous to the butt-able HEXITEC arrays.
- Heavy Boron-Doped Diamond (BDD): A candidate material for in-vacuum, radiation-hard beam monitors and pinhole substrates where conductivity, low outgassing, and thermal conductivity are advantageous.
-
Customization Potential:
- Custom Metalization: If your team requires metallized diamond carriers, beam stoppers, or detector substrates, 6CCVD provides in-house Au, Pt, Pd, Ti, W, and Cu metalization stacks (e.g., Ti/Pt/Au) tailored to your thermal budget and bonding process.
- Laser Cutting & Dicing: 6CCVD offers laser-cut diamond into non-standard geometries (pinhole apertures, mesh test targets, segmented arrays) with sub-50 µm features, directly supporting the kind of resolution-validation targets used in this study.
- Thickness Engineering: 200 µm-class plates, 500 µm scintillator-grade SCD, and sub-µm freestanding membranes are all in the standard process envelope.
-
Engineering Support:
- 6CCVD’s in-house PhD engineering team can support material selection for synchrotron beamline instrumentation, X-ray imaging optics, scintillator development, and high-radiation detector windows. Whether the goal is replicating LYSO performance with diamond, scaling to a tiled detector array, or selecting a thermally robust substrate for an in-situ furnace window, our team can model the geometry, recommend the diamond grade, and propose a metallization scheme.
-
Call to Action:
- For custom specifications, metallization stacks, or material consultation on diamond components for synchrotron and X-ray imaging projects, visit 6ccvd.com or contact our engineering team directly.
View Original Abstract
A novel, “single-shot” fluorescence imaging technique has been demonstrated on the B16 beamline at the Diamond Light Source synchrotron using the HEXITEC energy dispersive imaging detector. A custom made furnace with 200μm thick metal alloy samples was positioned in a white X-ray beam with a hole made in the furnace walls to allow the transmitted beam to be imaged with a conventional X-ray imaging camera consisting of a 500 μm thick single crystal LYSO scintillator, mirror and lens coupled to an AVT Manta G125B CCD sensor. The samples were positioned 45° to the incident beam to enable simultaneous transmission and fluorescence imaging. The HEXITEC detector was positioned at 90° to the sample with a 50 μm pinhole 13cm from the sample and the detector positioned 2.3m from pinhole. The geometric magnification provided a field of view of 1.1×1.1mm2 with one of the 80×80 pixels imaging an area equivalent to 13μm2. Al-Cu alloys doped with Zr, Ag and Mo were imaged in transmission and fluorescence mode. The fluorescence images showed that the dopant metals could be simultaneously imaged with sufficient counts on all 80x80 pixels within 60s, with the X-ray flux limiting the fluorescence imaging rate. This technique demonstrated that it is possible to simultaneously image and identify multiple elements on a spatial resolution scale ~10μm or higher without the time consuming need to scan monochromatic energies or raster scan a focused beam of X-rays. Moving to high flux beamlines and using an array of detectors could improve the imaging speed of the technique with element specific imaging estimated to be on a 1s timescale.