Skip to content

The Graphene/l-Cysteine/Gold-Modified Electrode for the Differential Pulse Stripping Voltammetry Detection of Trace Levels of Cadmium

MetadataDetails
Publication Date2016-06-13
JournalMicromachines
AuthorsYu Song, Chao Bian, Jianhua Tong, Yang Li, Shanghong Xia
InstitutionsState Key Laboratory of Transducer Technology, University of Chinese Academy of Sciences
Citations16

Cadmium(II) is a common water pollutant with high toxicity. It is of significant importance for detecting aqueous contaminants accurately, as these contaminants are harmful to human health and environment. This paper describes the fabrication, characterization, and application of an environment-friendly graphene (Gr)/l-cysteine/gold electrode to detect trace levels of cadmium (Cd) by differential pulse stripping voltammetry (DPSV). The influence of hydrogen overflow was decreased and the current response was enhanced because the modified graphene extended the potential range of the electrode. The Gr/l-cysteine/gold electrode showed high electrochemical conductivity, producing a marked increase in anodic peak currents (vs. the glass carbon electrode (GCE) and boron-doped diamond (BDD) electrode). The calculated detection limits are 1.15, 0.30, and 1.42 ”g/L, and the sensitivities go up to 0.18, 21.69, and 152.0 nA·mm−2·”g−1·L for, respectively, the BDD electrode, the GCE, and the Gr/l-cysteine/gold electrode. It was shown that the Gr/l-cysteine/gold-modified electrode is an effective means for obtaining highly selective and sensitive electrodes to detect trace levels of cadmium.

  1. 2009 - Comparison of cadmium and copper effect on phenolic metabolism, mineral nutrients and stress-related parameters in Matricaria chamomilla plants [Crossref]
  2. 2005 - Low dose mercury toxicity and human health [Crossref]
  3. 2016 - Dietary exposure to cadmium and risk of breast cancer in postmenopausal women: A systematic review and meta-analysis [Crossref]
  4. 2015 - A review on detection of heavy metal ions in water—An electrochemical approach [Crossref]
  5. 2014 - Direct determination of total mercury in phosphate rock using alkaline fusion digestion [Crossref]
  6. 1983 - Combination of flow-injection analysis with flame atomic-absorption spectrophotometry—Determination of trace amounts of heavy-metals in polluted seawater [Crossref]
  7. 2008 - The determination of some heavy metals in food samples by flame atomic absorption spectrometry after their separation-preconcentration on bis salicyl aldehyde, 1,3 propan diimine (BSPDI) loaded on activated carbon [Crossref]
  8. 2000 - The role of speciation in analytical chemistry [Crossref]
  9. 2004 - Speciation of heavy metals in marine sediments from the East China sea by ICP-MS with sequential extraction [Crossref]