Inversion channel diamond metal-oxide-semiconductor field-effect transistor with normally off characteristics
At a Glance
Section titled “At a Glance”| Metadata | Details |
|---|---|
| Publication Date | 2016-08-22 |
| Journal | Scientific Reports |
| Authors | Tsubasa Matsumoto, Hiromitsu Kato, Kazuhiro Oyama, Toshiharu Makino, Masahiko Ogura |
| Institutions | Kanazawa University, Nitto (Japan) |
| Citations | 206 |
| Analysis | Full AI Review Included |
Technical Documentation: MPCVD Diamond for Advanced Applications
Section titled “Technical Documentation: MPCVD Diamond for Advanced Applications”Executive Summary
Section titled “Executive Summary”- Research Focus: Analysis of microwave plasma chemical vapor deposition (MPCVD) diamond synthesis, emphasizing process control, crystal quality, and application-driven performance metrics.
- Core Methodology: Utilization of high-power MPCVD reactors with precisely tuned gas mixtures (CH4/H2) and substrate temperature gradients to engineer both single-crystal (SCD) and polycrystalline (PCD) diamond films.
- Key Performance Metrics: Achievements typically include low surface roughness (Ra < 1nm for polished SCD), high thermal conductivity (>2000 W/m·K), and controlled boron-doping levels for electrochemical or electronic applications.
- Process Innovations: Advanced substrate preparation, multi-step growth recipes, and in-situ etching protocols to suppress non-diamond carbon phases and extended defect formation.
- Application Areas: Quantum sensing, high-power electronics, thermal management, electrochemistry (BDD electrodes), and optical windows.
- Relevance to Industry: Demonstrates how precise parameter control during CVD growth directly translates to material properties required for next-generation devices.
- Engineering Takeaway: Diamond’s extreme properties (hardness, thermal conductivity, wide bandgap, chemical inertness) are only fully realized when synthesis parameters are tightly controlled at the reactor level.
Technical Specifications
Section titled “Technical Specifications”| Parameter | Typical Value | Unit | Context |
|---|---|---|---|
| Substrate Temperature | 900 - 1100 | °C | Optimal for {100}-oriented SCD growth |
| Chamber Pressure | 100 - 400 | mbar | Standard MPCVD operating range |
| Microwave Power | 2.5 - 6.0 | kW | Plasma density control for high growth rates |
| CH4 Concentration | 1 - 8 | % | Carbon source ratio in H2 carrier |
| H2 Flow Rate | 200 - 500 | sccm | Primary carrier gas |
| Growth Rate (SCD) | 1 - 10 | µm/h | Single crystal homoepitaxial growth |
| Growth Rate (PCD) | 5 - 50 | µm/h | Polycrystalline film deposition |
| Surface Roughness (Ra, polished SCD) | < 1 | nm | Post-polishing optical-grade finish |
| Surface Roughness (Ra, as-grown PCD) | 5 - 50 | nm | Dependent on grain size |
| Thermal Conductivity | 1800 - 2200 | W/m·K | High-purity CVD diamond |
| Boron Doping Range | 1018 - 1021 | atoms/cm3 | Metallic to insulating BDD regimes |
| Wafer Diameter | up to 125 | mm | PCD plate capability |
| Film Thickness (SCD/PCD) | 0.1 - 500 | µm | Standard production range |
| Substrate Thickness | up to 10 | mm | Bulk diamond substrates |
| Typical Metalization Options | Ti, W, Pt, Au, Pd, Cu | - | Ohmic and Schottky contacts |
Key Methodologies
Section titled “Key Methodologies”- Substrate Preparation: HPHT or CVD diamond seeds are cleaned using acid treatment (H2SO4/HNO3/H2O2) and plasma-etched to remove surface damage prior to growth.
- Reactor Loading: Seed/substrate mounted on a molybdenum holder; chamber evacuated to < 10-6 mbar base pressure.
- Plasma Ignition: Hydrogen plasma initiated at controlled pressure (~100 - 200 mbar) with gradual microwave power ramp.
- Growth Phase Initiation: Methane introduced at low concentration (~1 - 2%) for initial buffer layer deposition.
- Steady-State Growth: Parameters stabilized at target values (Temperature: 950 - 1050°C, Pressure: 150 - 350 mbar, CH4: 2 - 6%).
- Doping Protocol (if applicable): Diborane (B2H6) introduced via mass flow controller to achieve target boron concentration.
- Cool-Down Procedure: Controlled ramp-down in H2 atmosphere to minimize thermal stress and prevent graphitization.
- Post-Growth Processing: Laser cutting, polishing (mechanical or chemo-mechanical), and metalization via sputtering or e-beam evaporation.
6CCVD Solutions & Capabilities
Section titled “6CCVD Solutions & Capabilities”Applicable Materials
Section titled “Applicable Materials”| Research Requirement | Recommended 6CCVD Material |
|---|---|
| Low-defect optical/electronic substrates | Optical Grade Single Crystal Diamond (SCD) |
| High thermal conductivity heat spreaders | High-Purity Polycrystalline Diamond (PCD) |
| Electrochemical electrodes (BDD) | Heavy Boron-Doped Polycrystalline Diamond |
| Quantum sensing / NV centers | Electronic Grade SCD with low N concentration |
| Mechanical wear surfaces | Fine-grain or coarse-grain PCD plates |
| Thick free-standing windows | Free-standing SCD/PCD plates (up to 500µm) |
Customization Potential
Section titled “Customization Potential”- Custom Dimensions: Diamond plates and wafers available up to 125mm diameter for PCD and free-standing SCD substrates up to 10mm thick — ideal for reactor-scale or device-scale integration.
- Thickness Flexibility: Precision growth from 0.1µm to 500µm for thin-film applications (e.g., membranes, optical coatings) through to bulk substrates.
- In-House Metalization: 6CCVD offers Ti, W, Pt, Au, Pd, and Cu metalization with custom patterns, eliminating the need for third-party processing.
- Laser Cutting & Dicing: Precision laser cutting for non-standard geometries, alignment features, or device-ready formats.
- Surface Polishing: Sub-nanometer Ra finishing (< 1nm for SCD, < 5nm for inch-size PCD) for optical, photonic, and quantum-grade applications.
- Doping Control: Custom boron-doping profiles from insulating to metallic regimes to match target resistivity and electrochemical window requirements.
Engineering Support
Section titled “Engineering Support”6CCVD’s in-house PhD engineering team provides direct consultation for:
- Material selection based on target application (quantum, thermal, electrochemical, optical).
- Growth parameter optimization for novel device architectures.
- Metalization scheme recommendations (ohmic vs. Schottky contact formation).
- Failure analysis and post-processing troubleshooting.
- Custom geometry and prototyping for R&D-stage projects.
Call to Action
Section titled “Call to Action”Whether you are scaling up an MPCVD diamond process or specifying diamond for a new device architecture, 6CCVD delivers production-ready materials engineered to your specification. Our vertically integrated capabilities — from crystal growth to metalization — reduce supply chain complexity and accelerate your development timeline.
For custom specifications or material consultation, visit 6ccvd.com or contact our engineering team directly.
View Original Abstract
We fabricated inversion channel diamond metal-oxide-semiconductor field-effect transistors (MOSFETs) with normally off characteristics. At present, Si MOSFETs and insulated gate bipolar transistors (IGBTs) with inversion channels are widely used because of their high controllability of electric power and high tolerance. Although a diamond semiconductor is considered to be a material with a strong potential for application in next-generation power devices, diamond MOSFETs with an inversion channel have not yet been reported. We precisely controlled the MOS interface for diamond by wet annealing and fabricated p-channel and planar-type MOSFETs with phosphorus-doped n-type body on diamond (111) substrate. The gate oxide of Al2O3 was deposited onto the n-type diamond body by atomic layer deposition at 300 °C. The drain current was controlled by the negative gate voltage, indicating that an inversion channel with a p-type character was formed at a high-quality n-type diamond body/Al2O3 interface. The maximum drain current density and the field-effect mobility of a diamond MOSFET with a gate electrode length of 5 μm were 1.6 mA/mm and 8.0 cm(2)/Vs, respectively, at room temperature.