Skip to content
6CCVD Research

Synthesis and evaluation of fluorinated nano diamond for application of polymer composite

At a Glance

Section titled ā€œAt a Glanceā€
MetadataDetails
Publication Date2016-08-01
AuthorsAkifumi Yao, Isamu Mori
InstitutionsCentral Glass (Japan)
Citations1

Abstract

Section titled ā€œAbstractā€

This paper reports on the preparation and evaluation of fluorinated nano diamond (FND) for application of polymer composite. The fluorination of the nano diamond (ND) not only removes the impurities carbon layers of ND surface but also improves the solvent dispersibility of ND. ND and FND were successfully fabricated by composite of epoxy resin. Especially, FND was well-dispersed in the epoxy matrix due to its good solvent dispersibility of FND. The measured thermal conductivity of the ND/epoxy composite and FND/epoxy composite were 0.38W/mK at ND-1wt.% and 0.41W/mK at FND-5wt.%, respectively. High electrical insulation and thermal conductivity of FND/epoxy composites are promising for an application of the electrical package field.

Tech Support

Section titled ā€œTech Supportā€

Original Source

Section titled ā€œOriginal Sourceā€

References

Section titled ā€œReferencesā€
  1. 2003 - Third French-Japanese Seminar on Fluorine in Inorganic Chemistry and Electrochimeistry

Reads Similar to This

Impact of Peak Material Volume of Polycrystalline CVD Diamond Coatings on Dry Friction Against Aluminum Conductive printable electrodes tuned by boron-doped nanodiamond foil additives for nitroexplosive detection A physical model of a diamond vertical Schottky diode including incomplete ionization and thermal effects