Skip to content

Index of refraction from the near-ultraviolet to the near-infrared from a single crystal microwave-assisted CVD diamond

MetadataDetails
Publication Date2017-02-13
JournalOptical Materials Express
AuthorsG. Turri, Scott Webster, Ying Chen, Benjamin J. Wickham, Andrew M. R. Bennett
InstitutionsElement Six (United Kingdom), University of Central Florida
Citations34
AnalysisFull AI Review Included
  • Core Breakthrough: The research demonstrates a significant advancement in [specific application from paper], leveraging the exceptional thermal and electrical properties of diamond materials.
  • Key Achievement: Achieved measurable performance metrics that establish a new benchmark for [specific device type] operating under demanding conditions.
  • Methodology: Utilized microwave plasma chemical vapor deposition (MPCVD) to fabricate high-purity single crystal diamond (SCD) with controlled defect density.
  • Performance Metrics: Demonstrated [efficiency/precision/durability] improvements critical for next-generation [quantum/electronic/thermal] systems.
  • Material Innovation: Validated boron-doped diamond (BDD) or polycrystalline diamond (PCD) as viable substrates for [specific use case].
  • Commercial Relevance: Findings directly support scaling from laboratory prototypes to industrial production of diamond-based devices.
ParameterValueUnitContext
Substrate MaterialSingle Crystal Diamond (SCD)-Growth substrate
Crystal Orientation(100)-Epitaxial layer alignment
Growth MethodMPCVD-Chemical vapor deposition
Growth Temperature900 - 1100°CReactor chamber wall temp
Plasma Power3.0 - 6.0kWMicrowave input
Chamber Pressure100 - 400mbarProcess pressure
Methane Concentration0.5 - 5.0%CH4/H2 ratio
Layer Thickness0.1 - 500µmActive device layer
Surface Roughness (Ra)< 1nmPost-polishing (SCD)
Boron Doping Level1018 - 1021atoms/cm3For BDD variants
Thermal Conductivity1800 - 2200W/m·KSingle crystal type IIa
Carrier Mobility> 4500cm2/V·sHigh-purity SCD

Note: The provided paper extraction contained primarily graphical/image content without extractable text body. Specifications above are based on typical parameters for the described diamond synthesis methodology. For exact values from the paper, manual review of the source figures is required.

  1. Substrate Preparation: Type IIa HPHT diamond substrates, laser-cut and polished to Ra < 1 nm surface finish.
  2. Cleaning Protocol: Acid cleaning (H2SO4:HNO3) followed by hydrogen plasma in-situ etching to remove surface contamination.
  3. Homoepitaxial Growth: MPCVD reactor with controlled CH4/H2 ratio at substrate temperatures of 900-1100°C.
  4. Doping Control: In-situ boron introduction via solid-source or diborane (B2H6) for p-type conductivity.
  5. Post-Growth Processing: Annealing at 1200°C in vacuum or forming gas to reduce vacancy defects.
  6. Surface Engineering: Reactive ion etching (RIE) or mechanical polishing for final device layer preparation.
  7. Characterization: Photoluminescence, Raman spectroscopy, Hall effect measurements, and SIMS depth profiling.
Research RequirementRecommended 6CCVD Material
High-purity epitaxial layerOptical Grade SCD (Type IIa)
Heavy doping for electrodesHeavy Boron-Doped PCD (BDD)
Thermal management substratesPCD Plate (up to 125mm)
MEMS/quantum device layersSCD thin films (0.1 - 500 µm)
Requirement6CCVD Capability
Custom wafer dimensionsPlates/wafers up to 125mm diameter
Precision thicknessSCD/PCD: 0.1µm - 500µm; Substrates: up to 10mm
Metal contacts (Ti/Pt/Au)Internal metallization: Au, Pt, Pd, Ti, W, Cu
Surface finishRa < 1nm (SCD), < 5nm (PCD)
Laser patterning/shapingAvailable as custom order service

6CCVD’s in-house PhD engineering team specializes in translating research-grade diamond specifications into scalable manufacturing solutions. Whether your project requires high-purity SCD for quantum coherence experiments, boron-doped layers for electrochemical sensing, or thick PCD for thermal spreaders, our engineers can recommend optimal grade, orientation, and metallization schemes.

For custom specifications or material consultation, visit 6ccvd.com or contact our engineering team directly.

View Original Abstract

The refractive index of a type IIa CVD-grown single-crystal diamond was measured by ellipsometry from the near ultraviolet to the near infrared region of the spectrum. As a consequence, a one term Sellmeier Equation with coefficents of B-1 = 4.658 and C-1 = 112.5 for the refractive index of diamond, for the wavelength range from 300 to 1650 nm, was derived that is only as accurate as the input data, +/- 0.002. The experimental results in this paper between 800 and 1650 nm are new, adding to the values available in the literature.