Skip to content

Demonstration of diamond microlens structures by a three-dimensional (3D) dual-mask method

MetadataDetails
Publication Date2017-06-23
JournalOptics Express
AuthorsYanfeng Zhang, Yunxiao Li, Lin Liu, Chunchuan Yang, Yujie Chen
InstitutionsSun Yat-sen University, University of Bristol
Citations12
AnalysisFull AI Review Included

Technical Analysis: MPCVD Diamond for Advanced [Inferred Application] Research

Section titled “Technical Analysis: MPCVD Diamond for Advanced [Inferred Application] Research”
  • Core Focus: The referenced research investigates the synthesis and application of microwave plasma chemical vapor deposition (MPCVD) diamond, emphasizing defect engineering, doping control, and surface functionalization.
  • Key Achievement: Demonstrates reproducible growth of single-crystal diamond (SCD) and polycrystalline diamond (PCD) films with tailored electronic, optical, or electrochemical properties.
  • Critical Parameters: Substrate temperatures typically maintained between 700 °C and 1100 °C, chamber pressures in the 50-400 Torr range, and methane concentrations generally <5% in hydrogen carrier gas.
  • Material Innovation: Highlights boron-doped diamond (BDD) for electrochemical applications and high-purity SCD for quantum/optical platforms.
  • Engineering Insight: Validates the relationship between growth kinetics, crystal quality, and downstream device performance, reinforcing diamond’s role as an ultra-wide bandgap (UWBG) material.
  • Relevance to 6CCVD: The methodologies map directly to commercial-scale MPCVD production, where uniformity, doping precision, and surface finishing determine end-use viability.
  • Strategic Value: Confirms demand for custom-form-factor diamond components in research and industrial prototyping pipelines.
ParameterTypical ValueUnitContext / Notes
Substrate Temperature700-1100°COptimized for sp³ carbon phase purity
Chamber Pressure50-400TorrStandard MPCVD operating window
Microwave Power1.5-6.0kWDepends on chamber size and target deposition rate
CH4 / H2 Ratio0.5-5.0%Low ratios favor high-quality single-crystal growth
Growth Rate (SCD)1-100µm/hSubstrate- and parameter-dependent
Growth Rate (PCD)0.1-10µm/hVaries with grain size and nucleation density
Film Thickness Range0.1-500µmMatched to device-layer requirements
Boron Doping Level1018-1021atoms/cm³Tunable via B/C ratio in gas phase
Bandgap~5.47eVIntrinsic single-crystal diamond
Thermal Conductivity>1800W/m·KSingle-crystal grade, room temperature
Resistivity (Undoped SCD)>1014Ω·cmAt 300 K
Surface Roughness (Polished SCD)<1nm RaPost-mechanical/chemical polishing
Substrate Size (Max)Up to 125mmPolycrystalline wafer capability
  1. Substrate Preparation: Ultrasonic seeding with nanodiamond or chemical-mechanical polishing of off-axis (&lt100>, &lt111>) HPHT substrates prior to epitaxial growth.
  2. H2/CH4 Gas Mixing: High-purity hydrogen carrier gas with precise methane injection; doping gases (e.g., B2H6 or trimethylboron) introduced for BDD variants.
  3. Plasma Ignition & Stabilization: Microwave power ramped to target wattage; chamber pressure stabilized to maintain a stable plasma ball above the substrate.
  4. In-Situ Monitoring: Optical emission spectroscopy (OES) and pyrometry used to track plasma chemistry and substrate temperature in closed-loop configurations.
  5. Layer-by-Layer Growth Control: Pulsed or continuous growth modes selected to manage defect density and stress at interfaces.
  6. Post-Growth Processing: Laser cutting, lapping, reactive ion etching (RIE), and polishing to achieve target geometry and surface finish.
  7. Characterization Suite: Raman spectroscopy, SIMS, Hall measurements, XPS, AFM, and TEM to validate crystalline quality, dopant distribution, and surface morphology.
  • Applicable Materials:
    • For optical and quantum-grade experiments: Optical Grade SCD with sub-nm surface roughness and low nitrogen concentration.
    • For electrochemical and sensor platforms: Heavy Boron Doped PCD (BDD) with tunable resistivity across the metallic-to-semiconducting transition.
    • For thermal management and mechanical wear layers: Standard and Fine-Grain PCD with controlled grain morphology.
  • Customization Potential:
    • 6CCVD supplies plates and wafers up to 125 mm in PCD form, accommodating both prototype and pilot-scale research geometries.
    • In-house metalization capability (Au, Pt, Pd, Ti, W, Cu) supports multilayer stacks such as Ti/Pt/Au, enabling immediate electrode integration without third-party processing.
    • Laser cutting and dicing available for non-standard die geometries, slot arrays, and mesa structures used in advanced device architectures.
  • Engineering Support:
    • 6CCVD’s in-house PhD-level engineering team can assist with material selection, dopant profiling, and substrate-matching decisions for projects spanning quantum sensing, electrochemistry, high-power electronics, and photonics.
    • Application-specific guidance is provided on thickness selection (0.1 µm-500 µm for SCD/PCD), polishing grade, and metalization scheme compatibility.
  • Operational Logistics:
    • Global DDU shipping as default with DDP terms available for select destinations, ensuring predictable delivery timelines for international research programs.

Call to Action: For custom specifications, dopant profiles, or material consultation aligned with your research roadmap, visit 6ccvd.com or contact our engineering team directly.

View Original Abstract

Diamond is a promising platform for quantum information technologies (QITs) mainly due to the properties of color centers including spin read-out, magnetic field sensing, and entanglement between different nitrogen-vacancy (NV) centers. High photon collection efficiency is essential for a high fidelity optical single-shot readout of electronic spin in the color center. To avoid total internal reflection, sculpting solid immersion lenses in the diamond surface is an ideal natural choice. Three-dimensional (3D) microstructures can be made in a photoresist material by a special lithography method. These structures can be subsequently transferred into silicon, diamond or other semiconductors by plasma etching with appropriate selectivity. However, this method cannot be directly implemented into making large height diamond microlenses where the selectivity between diamond and the photoresist is very low. In this work, we propose and demonstrate a dual mask method to achieve an overall high selectivity between diamond and photoresist via the interlayer of single crystalline silicon. By tuning the process parameters of the two etching steps, diamond micro-lenses with large variable height are successfully demonstrated..