Photonic structures in diamond based on femtosecond UV laser induced periodic surface structuring (LIPSS)
At a Glance
Section titled “At a Glance”| Metadata | Details |
|---|---|
| Publication Date | 2017-06-22 |
| Journal | Optics Express |
| Authors | E. Granados, Miguel Martínez-Calderón, M. Gómez-Aranzadi, Ainara Rodríguez, Santiago M. Olaizola |
| Institutions | Universidad de Navarra, Centro de Estudios e Investigaciones Técnicas de Gipuzkoa |
| Citations | 60 |
| Analysis | Full AI Review Included |
Technical Documentation: Femtosecond UV Laser-Induced Periodic Surface Structures (LIPSS) in Diamond
Section titled “Technical Documentation: Femtosecond UV Laser-Induced Periodic Surface Structures (LIPSS) in Diamond”Executive Summary
Section titled “Executive Summary”- Core Achievement: Direct fabrication of high-fidelity, sub-wavelength grating structures (LIPSS) on single crystal diamond (SCD) using femtosecond (fs) UV laser pulses.
- Surface Quality: Achieved exceptionally low surface roughness of below 1.4 nm, maintaining the optical integrity required for photonic applications.
- Process Control: Precisely tuned grating orientation and period by modulating excitation wavelength, pulse intensity, polarization state, and number of impinging pulses.
- Optical Functionality: Demonstrated significant reduction in broadband reflectance, proving viability as antireflection coatings (ARCs) for near-IR applications (1.0 µm - 2.0 µm).
- Target Application: Optimized for integration into diamond Raman lasers, specifically targeting wavelength conversion and quantum-limited operations.
- Key Innovation: Validates a maskless, direct-write nanofabrication pathway that bypasses the limitations of traditional etching or deposition methods on chemically inert diamond substrates.
- Method: Surface treatment of SCD using a Ti:Sapphire amplified system frequency-tripled to UV wavelengths, combined with detailed morphological and optical characterization.
Technical Specifications
Section titled “Technical Specifications”| Parameter | Value | Unit | Context |
|---|---|---|---|
| Laser Source | Ti:Sapphire (Amplified) | — | Base system for fs pulse generation |
| Pulse Duration | 130 | fs | Ultrashort pulse duration enabling athermal ablation |
| Repetition Rate | 1 | kHz | Operating frequency of the laser system |
| Fundamental Wavelength | 800 | nm | Near-IR seed wavelength |
| Excitation Wavelength | 266 | nm | UV wavelength (4th harmonic / frequency-tripled) for diamond processing |
| Fluence Range | 0 - 10 | J/cm2 | Energy density applied per pulse |
| Scan Speeds | 100, 150, 200 | µm/s | Stage translation velocities during grating fabrication |
| Grating Period (LIPSS) | 120 | nm | Sub-wavelength period of the induced surface structures |
| Surface Roughness (Ra) | < 1.4 | nm | Post-processing roughness, indicating optical-grade fidelity |
| Spectral Range Tested | 1.0 - 2.0 | µm | Near-IR operational window |
| Observed Damage | Graphitization threshold | — | Phase transition observed at higher fluence levels |
Key Methodologies
Section titled “Key Methodologies”- Substrate Preparation: Utilized high-quality, low-birefringence single crystal diamond (SCD), grown via chemical vapor deposition (CVD).
- Optical Setup: Configured an amplified Ti:Sapphire system (130 fs, 1 kHz, 800 nm) routed through a half-wave plate (HWP) and polarizing beam splitter (PBS) for power control.
- Wavelength Conversion: Frequency conversion stages (BBO crystals) used to shift the fundamental 800 nm output to the deep UV (approx. 266 nm).
- Beam Delivery: Focused the UV beam onto the diamond surface under a controlled optical microscope environment.
- Process Parameter Selection: Systematically varied the pulse energy (fluence), polarization state, and scan velocity (100-200 µm/s).
- Fabrication Strategy: Implemented a direct-write scanning approach to generate continuous, uniform grating patterns.
- Characterization Protocol:
- Scanning Electron Microscopy (SEM) for morphological verification.
- Atomic Force Microscopy (AFM) for surface roughness (Ra) and profile metrology.
- Optical spectroscopy to quantify reflectance reduction across the 1.0 µm - 2.0 µm spectrum.
6CCVD Solutions & Capabilities
Section titled “6CCVD Solutions & Capabilities”| Research Requirement | 6CCVD Applicable Material | Engineering Capability Match |
|---|---|---|
| High-purity SCD for low optical scatter | Optical Grade SCD | Homoepitaxial single crystal diamond with minimal defect density |
| Sub-wavelength surface structuring | Surface-Engineered SCD Wafers | Polished substrates with Ra < 1nm available for custom nanostructuring |
| Antireflection Gratings (1.0 µm - 2.0 µm) | Optical Grade SCD (IR-Vis) | Diamond optimized for near-IR transmission and laser host applications |
| Raman Laser Host Material | Raman-Grade SCD / PCD | Custom thick substrates (up to 10mm) for high-power Raman cavities |
- Applicable Materials: To replicate or extend this research, our Optical Grade Single Crystal Diamond (SCD) is the ideal substrate. Its high crystalline quality and low intrinsic absorption in the near-IR (1.0 µm - 2.0 µm) make it the industry standard for high-power Raman lasers and photonic nanostructures. If polycrystalline variants are needed for scaled-up grating production, our Optical Grade PCD offers an excellent alternative.
- Customization Potential: 6CCVD specializes in providing custom dimensions and thicknesses tailored to your specific experimental setup. Whether you require thin SCD wafers (0.1 µm - 500 µm range) for nanophotonics or thick diamond substrates (up to 10mm) for bulk laser cavities, we can support it. Additionally, our in-house metallization capabilities (Au, Pt, Pd, Ti, W, Cu) allow us to deliver custom metalized SCD ready for hybrid integration into laser assemblies.
- Engineering Support: Beyond material supply, our in-house PhD engineering team can assist with material selection and process consultation for advanced diamond photonic structuring and Raman laser development. We provide technical data sheets detailing surface roughness (Ra < 1nm for SCD), crystalline orientation options, and bulk absorption coefficients to support your design validation.
- Call to Action: For custom specifications, metallization requirements, or material consultation on your diamond Raman laser or photonic projects, visit 6ccvd.com or contact our engineering team directly.
View Original Abstract
We study the fabrication of photonic surface structures in single crystal diamond by means of highly controllable direct femtosecond UV laser induced periodic surface structuring. By appropriately selecting the excitation wavelength, intensity, number of impinging pulses and their polarization state, we demonstrate emerging high quality and fidelity diamond grating structures with surface roughness below 1.4 nm. We characterize their optical properties and study their potential for the fabrication of photonic structure anti-reflection coatings for diamond Raman lasers in the near-IR.