Skip to content
6CCVD Research

3D analysis of thermal and electrical performance of wide bandgap VDMOSFETs

At a Glance

Section titled “At a Glance”
MetadataDetails
Publication Date2017-08-23
AuthorsM. A. Matin, Mahesh B. Manandhar
InstitutionsUniversity of Denver
Citations1

Abstract

Section titled “Abstract”

Power electronics is based on the conversion and conditioning of electric power in its different forms. The need for higher operating voltages, temperatures and switching speeds have necessitated for the use of semiconductor materials more superior to Silicon for power electronics purposes. Wide bandgap (WBG) materials like SiC, GaN and Diamond have been known to demonstrate better material properties as compared to Silicon, like higher operating temperatures, higher breakdown voltages and reduced thermal and electrical resistances which make them ideal for high power electronic devices. This paper analyzes the thermal and electrical performance of WBG power MOSFETs, in particular the Vertical Double-diffused MOSFET (VDMOSFET) structure, modeled in the commercial simulation software COMSOL Multiphysics. VDMOSFETs are ideal for high power electronic applications owing to their higher voltage blocking capabilities as compared to the conventional lateral MOSFET structure. COMSOL uses Finite Element/Volume Analysis methods to approximate solutions to differential equations involved with complex geometries and physics. The 3D model investigated in COMSOL for this paper solved for thermal and electrical variables for VDMOSFETs using SiC and GaN as their semiconductor material. Only a quarter of the 3D VDMOSFET structure was modeled for faster computational speed as the structure itself is symmetric about two vertical planes. The temperature profiles and current densities of each WBG material VDMOSFET were analyzed for different operating voltages. These profiles were compared with a Si VDMOSFET model to determine relative similarities and differences between each material.

Tech Support

Section titled “Tech Support”

Original Source

Section titled “Original Source”

References

Section titled “References”
  1. 2012 - Modern Power Semiconductor Devices (A Review)
  2. 2008 - Development, fabrication, and characterization of a vertical-diffused MOS process for power RF applications
  3. 2004 - Modeling power VDMOSFET transistors: Device physics and equivalent circuit model with parameter extraction
  4. 2012 - A review of WBG power semiconductor devices
  5. 2009 - State of the Art and the Future of Wide Band-Gap Devices
  6. 2003 - Comparison of wide band gap semiconductors for power electronics applications

Reads Similar to This

Generalized diamond‐type single DC‐source switched‐capacitor based multilevel inverter with step‐up and natural voltage balancing capabilities DC bulk conductive ceramic with low RF and microwave loss Diamond-Window Resonant Inductor with Significant AC Flux