Generation of Sub-100 ps Pulses at 532, 355, and 266 nm Using a SESAM Q-Switched Microchip Laser
At a Glance
Section titled āAt a Glanceā| Metadata | Details |
|---|---|
| Publication Date | 2017-09-14 |
| Journal | IEEE Photonics Technology Letters |
| Authors | Jari Nikkinen, Antti HƤrkƶnen, Iiro Leino, Mircea GuinÄ |
| Institutions | Tokyo Institute of Technology |
| Citations | 6 |
Abstract
Section titled āAbstractāWe report a single-frequency semiconductor saturable absorber mirror Q-switched microchip laser system generating sub-100 ps pulses at 532, 355, and 266 nm. The system consists of a 1064 nm Nd:YVO <sub xmlns:mml=āhttp://www.w3.org/1998/Math/MathMLā xmlns:xlink=āhttp://www.w3.org/1999/xlinkā>4</sub> master oscillator, Nd:YVO <sub xmlns:mml=āhttp://www.w3.org/1998/Math/MathMLā xmlns:xlink=āhttp://www.w3.org/1999/xlinkā>4</sub> power amplifier, and one or two nonlinear crystals for singlepass frequency-conversion to visible and UV. The average output power is about 720 mW at 532 nm, 150 mW at 355 nm and 83 mW at 266 nm for a pulse repetition rate of ~100 kHz. At 532 nm the peak power is nearly 80 kW with pulse energy of about 7.2 Ī¼J and spectral width of about 0.026 nm. The optical-to-optical conversion efficiency from 808 to 532 nm is about 8.3%. In comparison with mode-locked picosecond systems, the proposed laser has intrinsically low repetition rate, which is desirable in certain applications. The laser has also inherently narrow spectral width, and high peak power and pulse energy. This unique combination of output parameters could make the system useful in several applications including fluorescence lifetime imaging microscopy, high-accuracy submarine LIDAR, STED microscopy, time-gated Raman spectroscopy twophoton polymerization, diamond Raman laser pumping, photoacoustic imaging, and micro-machining/marking.