Skip to content

On-Demand Generation of Neutral and Negatively-Charged Silicon-Vacancy Centers in Diamond

MetadataDetails
Publication Date2018-03-17
JournalUCL Discovery (University College London)
AuthorsSiddharth Dhomkar, Pablo R. Zangara, Henshaw, Jacob, Meriles, Carlos A.
AnalysisFull AI Review Included
  • Objective: Investigate the photo-ionization dynamics of nitrogen-vacancy (NV) and silicon-vacancy (SiV) color centers in Type 1b single-crystal diamond (SCD) to achieve on-demand charge state initialization.
  • Material Platform: [111]-oriented CVD-grown Type 1b SCD with nitrogen content estimated between 1-5 ppm, hosting both NV and SiV point defects.
  • Optical Characterization: Custom two-color confocal microscopy with sub-micron resolution (~1 µm spot) using 532 nm and 632 nm laser excitation combined with high-resolution spectroscopy.
  • Key Discovery: SiV- centers ionize via a single-photon process under green/red excitation, with the ground state estimated ~1.9 eV below the conduction band minimum.
  • Charge Selectivity: SiV (NV) centers selectively capture electrons (holes) diffusing from local laser excitation, enabling non-local charge state manipulation over (40 µm)² areas.
  • Application Impact: Enables selective initialization of SiV- and NV0 ensembles for quantum information processing, optical switching, and high-density diamond-based charge memories.
  • Technique Validation: Results supported by electric-field-driven carrier transport experiments (0-400 V) and master-equation modeling of photo-generated carrier diffusion.
ParameterValueUnitContext
Diamond Type1b—HPHT/CVD SCD with aggregated nitrogen (1-5 ppm)
Crystal Orientation[111]—Growth axis for epitaxial compatibility
Nitrogen Content (N)1-5ppmSubstitutional nitrogen concentration
Excitation Wavelength 1532nmGreen laser for charge state manipulation
Excitation Wavelength 2632nmRed laser for SiV- ionization and NV0 initialization
Excitation Wavelength 3≥ 690nmThreshold below which no ionization observed
Excitation Spot Size~1µmConfocal diffraction-limited spot
Laser Power (Park)1mWProlonged exposure for charge initialization
Laser Power (Readout)100µWWeak red scan for non-destructive probing
Laser Power (Weak Scan)50µWGreen initialization for NV--rich background
NV0 ZPL575nmNeutral nitrogen-vacancy emission
NV- ZPL637nmNegatively charged nitrogen-vacancy emission
SiV- ZPL737nmNegatively charged silicon-vacancy emission
SiV0 ZPL946nmNeutral silicon-vacancy emission (weak at RT)
Bandpass Filter BP1550-620nmBroad NV collection window
Bandpass Filter BP2650-720nmNV--selective imaging
Bandpass Filter BP3720-760nmSiV--selective imaging
SiV- Ground State Depth~1.9eVEnergy gap to conduction band minimum
Ionization ProcessSingle-photon—Linear rate vs. power at 532 nm
Applied Bias Voltage0-400VIn-plane electric field for carrier separation
Pixel Integration Time2-5msConfocal image acquisition
Charge State Stability (Dark)≥ 1weekNo measurable change at room temperature
SiV- Fluorescence Fraction~0.6%Baseline under standard green excitation
NV- Max Fraction (Weak Scan)~70%Achievable fractional population
Imaging Area(40 µm)²—Region of non-local charge propagation
  1. Sample Selection: [111]-oriented Type 1b SCD with substitutional nitrogen (1-5 ppm) chosen for natural coexistence of NV and SiV centers.
  2. Two-Color Confocal Microscopy: Custom-built system with ~1 µm spot for simultaneous 532 nm excitation and 632 nm readout with bandpass filtering (BP1/BP2/BP3).
  3. Charge Initialization Protocol:
    • Red Park (632 nm): Multi-second exposure (30 s, 1 mW) at central point to ionize NV- and N0, generating diffusing electrons captured by proximal SiV centers.
    • Green Park (532 nm): Variable intensity (50 µW-1 mW) for simultaneous photo-generation of electrons and holes to study diffusion-mediated charge transfer.
    • Weak Green Scan (50 µW): Background initialization for NV--rich, SiV--depleted starting conditions.
  4. Ionization Rate Measurement: Exponential decay fitting of SiV- relative population (S-/S) versus 532 nm pulse duration across multiple laser powers.
  5. Wavelength-Dependent Threshold Testing: Probing ionization at 632 nm, 692 nm, and longer wavelengths to bracket the SiV- photo-ionization threshold (~1.9 eV).
  6. Electric-Field Carrier Identification: In-plane electrodes (0-400 V) parallel to optical axis to spatially separate photo-generated electrons and holes; confirm hole (not electron) capture by neutral NVs.
  7. On-Demand Initialization: Variable-intensity green laser scanning to achieve controlled SiV-/NV0 populations over (40 µm)² areas.
  8. Master Equation Modeling: Coupled rate equations for defect populations and free carrier concentrations parameterized against observed spatial charge distributions.

To replicate or extend the charge-state initialization protocols demonstrated in this work, 6CCVD recommends the following material grades:

Application RequirementRecommended 6CCVD Material
SiV and NV co-existing ensemblesOptical Grade SCD (Type 1b, [111]-oriented)
High-density NV charge memoryNitrogen-Doped SCD (1-5 ppm tunable)
SiV- photonics / spin qubitsLow-Nitrogen SCD with controlled Si incorporation during growth
Carrier transport / electric field studiesSCD substrates (up to 10 mm thickness) with polished faces Ra < 1 nm
Charge-stable bulk measurementsElectronic Grade SCD with ultra-low defect density

The research described here used specific crystal orientations, defect densities, and electrode geometries. 6CCVD offers full custom fabrication to match these requirements:

  • Custom Crystal Orientation: [111], [110], and [100] SCD wafers available upon request for epitaxial compatibility with your experimental geometry.
  • Tunable Nitrogen Concentration: Controlled doping during MPCVD growth allows nitrogen levels from < 0.1 ppm to > 100 ppm for optimized NV/SiV ratios.
  • Precision Dicing and Shaping: Laser cutting and polishing services for sub-100 µm features and uniform (40 µm)² active regions.
  • Metalization for Electrode Integration: In-house Ti, Pt, Au, Pd, W, and Cu deposition for in-plane field geometries (0-400 V bias structures used in this work).
  • Surface Engineering: Sub-nanometer polishing (Ra < 1 nm for SCD) ensures optical-grade surfaces required for confocal and waveguide-based readout schemes.
  • Thickness Control: SCD thicknesses from 0.1 µm to 500 µm; substrates up to 10 mm for bulk transport and deep-focus experiments.

The selective electron/hole capture dynamics, single-photon ionization behavior, and charge-state stability demonstrated in this paper place stringent demands on material purity, crystal orientation, and defect uniformity. 6CCVD’s in-house PhD engineering team specializes in:

  • Material selection guidance for color-center quantum optics, charge-based memory, and NV/SiV hybrid sensing platforms.
  • Defect density optimization to maximize SiV- or NV- fractional populations under your specific excitation protocol.
  • Wafer-scale characterization (PL mapping, Raman spectroscopy, ZPL intensity profiling) prior to shipment.
  • Co-development of metalized electrode geometries and packaging solutions for low-temperature or vacuum-compatible experimental setups.

For custom specifications, material consultation, or collaboration on quantum-grade diamond platforms, visit 6ccvd.com or contact our engineering team directly.

View Original Abstract

Point defects in wide-bandgap semiconductors are emerging as versatile resources for nanoscale sensing and quantum information science but our understanding of the photo-ionization dynamics is presently incomplete. Here we use two-color confocal microscopy to investigate the dynamics of charge in Type 1b diamond hosting nitrogen-vacancy (NV) and silicon-vacancy (SiV) centers. By examining the non-local fluorescence patterns emerging from local laser excitation, we show that in the simultaneous presence of photo-generated electrons and holes, SiV (NV) centers selectively transform into the negative (neutral) charge state. Unlike NVs, 532 nm illumination ionizes SiV- via a single photon process thus hinting at a comparatively shallower ground state. In particular, slower ionization rates at longer wavelengths suggest the latter lies approximately ~1.9 eV below the conduction band minimum. Building on the above observations we demonstrate on-demand SiV and NV charge initialization over large areas via green laser illumination of variable intensity.