Skip to content

Down-scaling grating couplers and waveguides in single-crystal diamond for VIS-UV operation

MetadataDetails
Publication Date2018-12-07
JournalJournal of Physics Photonics
AuthorsFei Gao, Jürgen Van Erps, Zhihong Huang, Hugo Thienpont, Raymond G. Beausoleil
InstitutionsVrije Universiteit Brussel, Hewlett-Packard (United States)
Citations5
AnalysisFull AI Review Included
  • First-ever VIS-UV grating couplers and waveguides on SCD thin films, experimentally demonstrating operation at 850 nm, 635 nm, and 405 nm wavelengths for photonic integrated circuits.
  • Novel tilted-etching (RIE) technique reduces diamond substrate wedge by 60%, from 300 to 120 nm mm-1, enabling uniform thin-film processing critical for short-wavelength nanophotonic fabrication.
  • High-performance photonic devices fabricated on Type II(a) SCD using electron-beam lithography (EBL) and reactive-ion etching (Ar/O2 plasma), achieving grating periods down to 254 nm.
  • Measured optical losses: 20.6 dB / 22.7 dB total grating coupling loss at 850 nm / 635 nm; waveguide propagation losses of 11 dB mm-1 and 20.5 dB mm-1, respectively.
  • 405 nm operation confirmed with 33.1 dB coupling loss and 46.7 dB mm-1 waveguide loss, extending SCD photonic capability into the UV domain.
  • Pivotal for quantum photonics, enabling efficient fiber-to-chip coupling for NV− and SiV− color centers, and supporting on-chip VIS supercontinuum generation and wavelength conversion.
  • CMOS-compatible and wafer-scale approach replaces traditional microscope objective or fiber-taper coupling, enabling automated testing and scalable photonic networks.

ParameterValueUnitContext
Target Operating Wavelengths850, 635, 405nmVIS-UV short-wavelength operation
Grating Periods560, 401, 254nmFor 850/635/405 nm devices
Grating Fill Factors0.41, 0.43, 0.41-TE-polarized transmission optimization
SCD Thin Film Thickness~250nmTarget for 850/635 nm devices
SCD Material TypeType II(a)-Electronic grade, low nitrogen
Refractive Index (SCD @ 635 nm)2.412-High index for tight confinement
Raman Gain (@ 1030 nm)13.5 ± 2.0cm GW-1On-chip wavelength conversion
Kerr Nonlinearity (NIR)8.2 ± 3.5 × 10-20m2 W-1Frequency comb generation
Raman Shift40THzExceptionally large
Initial Wafer Wedge300nm mm-1From commercial SCD plates
Reduced Wafer Wedge (tilted-etch)120nm mm-160% reduction achieved
Diamond Etch Rate (Ar/Cl2)39.1nm min-1Tilted-etching condition
Wedge Reduction Rate2.02nm mm-1 min-1Tilted-etching performance
Etch MaskXR1541 e-beam resist, 100 nm thick-Spin-coated
SiO2 Cladding Thickness2 µm-Top and bottom cladding
Total Grating Coupling Loss20.6 (850 nm), 22.7 (635 nm), 33.1 (405 nm)dBInput + output combined
Waveguide Propagation Loss11, 20.5, 46.7dB mm-1At 850/635/405 nm
-3 dB Bandwidth52, 26, 17nmAt 850/635/405 nm
Peak Transmission Wavelengths863, 632, 411nmMeasured values
Waveguide Length (max)370µmFabricated devices
Surface Roughness (Rq)~4nmAFM measurement on taper region
Tilt Angle During Etching~45°Mounted on metal holder
SCD Plate Starting Thickness5µmMechanical polished plate
Plasma ChemistryAr/Cl2 (thinning), Ar/O2 (RIE)-Dry-etching processes

  1. Substrate Preparation: Start with 3 × 3 mm2, 5 µm thick synthetic SCD plates (MBOptics); fragment into 1 mm2 shards and transfer onto Si carriers with 2 µm thermal SiO2.
  2. Tilted-Etching for Wedge Reduction: Mount carrier wafer at ~45° tilt angle in RIE chamber; use Ar/Cl2 plasma to create electric-field gradient, achieving higher etch rate on thicker side of diamond.
  3. Multi-Step Thinning: Reduce diamond thickness to ~1 µm, transfer to fresh carrier, resume thinning to target 250 nm. Etch rate of 39.1 nm min-1 at 30 min intervals.
  4. EBL Patterning: Spin-coat 100 nm of Dow Corning XR1541 e-beam resist (6% concentration); expose patterns using Raith 150-two EBL tool.
  5. Development: Use AZ300 MIF developer to reveal grating and waveguide patterns.
  6. Reactive-Ion Etching: Transfer patterns into diamond film using Ar/O2 plasma chemistry for grating definition.
  7. Resist Stripping: Remove residual e-beam resist using secondary Ar/Cl2 plasma step.
  8. Cladding Deposition: Grow 2 µm SiO2 top cladding via plasma-enhanced chemical vapor deposition (PECVD) to reduce scattering losses.
  9. Optical Characterization: Use 842 nm (Thorlabs LP852-SF30), 635 nm (Thorlabs S1FC635), and 405 nm (Coherent) CW lasers with tapered (50 µm core) and lensed (9 µm core) fibers for transmission measurements.

6CCVD ProductApplication Match
Optical Grade Single Crystal Diamond (SCD)Directly applicable for VIS-UV grating couplers and waveguide fabrication; required Type II(a) electronic-grade material with low nitrogen for minimal absorption across 405-850 nm range.
Ultra-Thin SCD Membranes (down to 0.1 µm)Matches the 250 nm thin-film requirement; 6CCVD provides custom thinning services to achieve sub-micron uniform membranes.
MPCVD-Grown SCD FilmsSuperior alternative to mechanical-polished plates; eliminates wedge issues at source by providing as-grown uniform thickness profiles, bypassing the need for post-process tilted-etching compensation.
  • Ultra-Low Wedge Wafers: 6CCVD can deliver SCD plates with minimized wedge (< 50 nm mm-1) through precision MPCVD growth and advanced polishing protocols, eliminating the need for complex tilted-etching compensation.
  • Custom Thickness Control: Films from 0.1 µm to 500 µm available for SCD; substrates up to 10 mm for thick device platforms.
  • Wafer Dimensions: Plates up to 125 mm diameter for scalable, wafer-scale photonic integration—ideal for transitioning this research to commercial production.
  • Surface Roughness Optimization: 6CCVD offers Ra < 1 nm polishing for SCD surfaces, directly reducing sidewall scattering losses that currently limit waveguide propagation efficiency at short wavelengths.
  • Laser Cutting Services: Custom shaping and dicing of SCD plates to specific shard dimensions (e.g., 1 mm2 or 3 × 3 mm2) for device fabrication workflows.

6CCVD’s in-house PhD engineering team specializes in SCD material selection for advanced photonic integrated circuits, quantum photonics (NV−/SiV− center applications), and nonlinear optics. Our team can assist with:

  • Material specification for short-wavelength VIS-UV photonic devices
  • Custom geometry design for waveguide and resonator fabrication
  • Thickness optimization to minimize propagation losses
  • Substrate selection guidance for quantum emitter integration

Call to Action: For custom specifications, material consultation, or to discuss your VIS-UV diamond photonic project, visit 6ccvd.com or contact our engineering team directly.

View Original Abstract

We report on the design, fabrication and experimental demonstration of single-crystal diamond (SCD) waveguide devices with integrated grating couplers optimized for 850 nm, 635 nm, and 405 nm wavelengths, respectively. The devices are fabricated on SCD thin films using electron-beam lithography and reactive-ion etching technologies. To reduce the wafer wedge typically present in commercial diamond plates, we introduce a novel tilted-etching technique in the preparation of the thin films. We obtain 60% reduction of the wafer wedge, namely from 300 to 120 nm mm -1 , enabling us to properly fabricate the devices designed for the short to ultra-short wavelengths considered here. Using light in- and out-coupling with 50 μ m core tapered fibers, we measure total (input plus output) grating coupling losses of 20.6 dB and 22.7 dB, and waveguide losses of 11 dB mm -1 and 20.5 dB mm -1 for the 850 nm and 635 nm wavelength devices, respectively. The 405 nm wavelength devices, tested with a lensed 9 μ m core input fiber and with the same tapered output fiber as employed for the other devices, also demonstrate light guidance, and feature total grating coupling and waveguide losses on the order of 33.1 dB and 46.7 dB mm -1 , respectively. These results showcase the possibility of down-scaling grating-coupled SCD devices for VIS-UV operation, and pave the way for exploiting diamond’s properties on photonic chips at extremely short wavelengths.