Skip to content

Nanodiamond Integration with Photonic Devices

MetadataDetails
Publication Date2019-07-22
JournalLaser & Photonics Review
AuthorsMarina Radulaski, Jingyuan Linda Zhang, Yan‐Kai Tzeng, Konstantinos G. Lagoudakis, Hitoshi Ishiwata
InstitutionsTokyo Institute of Technology, Lyon 1 Université
Citations75
AnalysisFull AI Review Included
  • Hybrid Quantum Photonics Platform: Successfully demonstrates integration of nanodiamonds hosting color centers (SiV, Cr-related) with 3C-SiC microdisk resonators for visible/NIR quantum optics.
  • Scalable Fabrication: Diamondoid-seeded CVD technique yields 60% resonator coverage with 80% of nanodiamonds positioned at the outer disk edge — the WGM field maximum.
  • Up to 5-Fold Enhancement: Hybrid SiC-nanodiamond devices demonstrate up to 5× Purcell enhancement of diamond color center light emission.
  • Refractive Index Matching: Closely matched indices (nSiC ≈ 2.6, ndiamond ≈ 2.4) enable deep evanescent field penetration into the nanodiamond — a clear advantage over III-V substrates.
  • Group-IV Compatibility: CMOS-compatible 3C-SiC growth on silicon wafers enables potential wafer-scale integration of quantum photonic circuits.
  • Alternative Platforms Benchmarked: Also covers GaP-on-bulk-diamond, SiO2 Fabry-Perot cavities (Q ≈ 1.9 × 104, F ≈ 9.2, 90% collection), and fiber/tapered waveguide coupling schemes.
  • Outlook: Highlights pathways to multi-emitter strong CQED coupling via cavity protection, benefiting from diamond’s low inhomogeneous broadening vs. quantum dots.
ParameterValueUnitContext
3C-SiC layer thickness200nmHeteroepitaxial film on (001)-Si
Microdisk diameter range1.8 - 2.4µmWGM resonators for visible/NIR
Purcell factor (F) range~3.7 - 8.4—SiC-nanodiamond hybrid resonators
Field overlap (ηDE/Emax)51 - 77%Nanodiamond position on disk edge
Emission enhancement (max)5×—SiC-nanodiamond hybrid
Nanodiamond yield on resonatorsup to 60%After 45 min CVD growth
Edge-positioning yield>80%Nanodiamonds at outer disk edge
Nanodiamond height (tg = 45 min)330 - 380nmCVD growth time dependent
Fabry-Perot cavity Q-factor1.9 × 104—SiO2-diamond hybrid FP
Fabry-Perot mode volume3.4 (λ/n)3—Small mode volume microcavity
Fabry-Perot Purcell factor9.2—With 90% collection efficiency
Single photon emission rate4.1MHzRoom-temperature FP source
NV-center emission rate (max)689kcpsNV in nanofiber-waist
ZPL wavelength range720 - 760nmSiV and Cr-related centers
nSiC2.6—3C-SiC refractive index
ndiamond2.4—Diamond refractive index
nGaP (context)~3.2—Large index enables tight confinement
SiV− DW factorup to 24%Individual ZPL transition
SiV0 DW factor~90%Neutral SiV
GeV− DW factor~60%Four ZPL transitions
SnV− DW factor~40%Four ZPL transitions
NV DW factor3 - 5%Bulk reference
  1. 3C-SiC Film Growth: Two-step CVD heteroepitaxy on (001)-Si producing 200 nm thick films.
  2. Microdisk Fabrication: Lithographic definition of 1.8 - 2.4 µm diameter disks, followed by plasma and gas-phase etching through SiC with underlying Si undercut release.
  3. Surface Oxidation: Oxygen plasma treatment of microdisks to generate a surface oxide layer compatible with diamondoid seeding.
  4. Diamondoid Seeding: Covalent attachment of [1(2,3)4] pentamantane diamondoids via phosphonyl dichloride linker chemistry to oxidized SiC surfaces.
  5. MPCVD Nanodiamond Growth: Microwave plasma-assisted CVD with H2/CH4 chemistry; growth times tuned (15, 30, 45 min) to balance yield vs. nanodiamond size (60 - 380 nm tall).
  6. In Situ Color Center Formation: SiV− centers formed during CVD via silicon etching from the SiC substrate; Cr-related centers incorporated via residual chromium in the chamber environment.
  7. Optical Characterization: WGM resonance spectroscopy at 720 - 760 nm; Purcell factor extraction via lifetime measurements; spectral tuning via controlled gas exposure cycles.
  8. FP Cavity Assembly (Reference): Laser-machined, mirror-coated optical fiber paired with a coated planar mirror serving as both sample holder and cavity end.
  9. Fiber/Waveguide Coupling: Tapered fiber nanofiber-waist and photonic crystal fiber end-facet transfer techniques for NV-center integration.
  10. Hybrid GaP-on-Diamond Assembly: Pick-and-place nanomanipulation for lateral placement of preselected nanodiamonds at cavity field maxima.

The hybrid quantum photonic platforms demonstrated in this work require exceptionally pure, dimensionally controlled diamond materials with engineered color center incorporation. 6CCVD’s manufacturing portfolio directly addresses each layer of these architectures:

  • Applicable Materials:

    • Optical Grade Single Crystal Diamond (SCD): For bulk-diamond approaches requiring low NV background, high Debye-Waller color centers, and ultra-low surface roughness. Available from 0.1 µm to 500 µm thickness.
    • Polycrystalline Diamond (PCD) Plates/Wafers: Up to 125 mm diameter — ideal for wafer-scale hybrid integration with 3C-SiC/Si CMOS-compatible processes described in this paper.
    • Custom Nanodiamond Powders: Detonation, HPHT, and CVD-derived nanodiamonds (typical range 10 nm to several hundred nm) suitable as seeding material or as final integrated emitters.
    • Boron-Doped Diamond (BDD): Available where conductive substrates are needed for electrostatic tuning of color center emission energies (relevant to the electric-field tuning demonstrated for NV centers in GaP-diamond hybrids).
  • Customization Potential:

    • Thickness Control: Diamond-on-SiC or diamond-on-GaP hybrid stacks benefit from precise thickness matching to evanescent field profiles. 6CCVD delivers SCD/PCD from 0.1 µm to 500 µm and substrates up to 10 mm.
    • Custom Metalization: Internal Au, Pt, Pd, Ti, W, and Cu metalization capabilities support the electrode structures needed for Stark tuning of color center ZPLs, as well as bonding pads for hybrid photonic circuit integration.
    • Laser Cutting & Dicing: Precision shaping of microdisk, microring, nanopillar, and nanofiber-waist geometries from bulk diamond or PCD wafers.
    • Surface Polishing: Ra < 1 nm on SCD and < 5 nm on inch-size PCD — critical for minimizing scattering losses in WGM resonators and Fabry-Perot microcavities targeting Q > 104.
  • Engineering Support:

    • 6CCVD’s in-house PhD engineering team can assist with material selection across the full diamond color center palette (NV, SiV, GeV, SnV, Cr-related) for hybrid quantum photonic applications including single-photon sources, quantum memories, and nano-magnetometry platforms.
    • Consultation available on seeding chemistry (diamondoid vs. nanodiamond), MPCVD recipe tuning for preferential in situ color center formation, and post-processing for low spectral diffusion.
  • Call to Action: For custom specifications or material consultation, visit 6ccvd.com or contact our engineering team directly.

View Original Abstract

Abstract The progress in integration of nanodiamond with photonic devices is analyzed in the light of quantum optical applications. Nanodiamonds host a variety of optically active defects, called color centers, which provide rich ground for photonic engineering. Theoretical introduction describing light and matter interaction between optical modes and a quantum emitter is presented, including the role of the Debye-Waller factor typical of color center emission. The synthesis of diamond nanoparticles is discussed in an overview of methods leading to experimentally realized hybrid platforms of nanodiamond with gallium phosphide, silicon dioxide, and silicon carbide. The trade‐offs in the substrate index of refraction values are reviewed in the context of the achieved strength of light and matter interaction. Thereby, the recent results on the growth of color center‐rich nanodiamond on prefabricated silicon carbide microdisk resonators are presented. These hybrid devices achieve up to fivefold enhancement of the diamond color‐center light emission and can be employed in integrated quantum photonics.