| Metadata | Details |
|---|
| Publication Date | 2019-11-01 |
| Journal | physica status solidi (a) |
| Authors | Becher, Christoph, POBEDINSKAS, Paulius |
| Analysis | Full AI Review Included |
- Core Focus: The Topical Section in Physica Status Solidi (a) catalogs cutting-edge developments in CVD and HPHT diamond growth, defect engineering, color center integration, and diamond-based electronic/optoelectronic device fabrication.
- Front Cover Highlight: Shinya Ohmagari et al. demonstrate the Metal-Assisted Termination (MAT) technique to suppress threading dislocation (TD) propagation in homoepitaxial diamond, yielding a significant reduction in TD density and improved Schottky barrier diode performance.
- Growth Innovations: Featured works include high-rate hot-filament CVD (HFCVD) using tantalum filaments at 3000°C, boron/nitrogen co-doping studies, point-arc remote plasma CVD for selective growth, and optical emission spectroscopy analysis of phosphorus doping plasmas.
- Quantum & Photonic Applications: Articles cover high-resolution single-ion implantation for color center creation, planarization of nanocrystalline diamond photonic structures, nanopillar fabrication on diamond membranes, and diamond-on-insulator grating couplers with non-vertical sidewall optimization.
- Device & Detector Progress: Encompasses defect detection via etch pit formation, irradiated SCD characterization under various ionizing particles, pn-junction leakage site determination, femtosecond laser electrode fabrication, and hydrogenated amorphous silicon carbide optoelectronics on BDD substrates.
- Strategic Value: The collection addresses the full device lifecycle — from bulk growth and defect mitigation to surface termination, nano-structuring, and functional integration — relevant to quantum sensing, high-power electronics, life sciences, and high-energy physics detectors.
| Parameter / Topic | Value / Method | Unit | Context & Application |
|---|
| Front Cover: MAT Technique | Metal-assisted in-situ termination | — | Dislocation annihilation during homoepitaxial CVD growth |
| TD Density Reduction | Significant decrease vs. undoped baseline | Dislocations/cm² | Schottky barrier diode fabrication (Ohmagari et al.) |
| HFCVD Filament Temperature | 3000 | °C | Tantalum filaments for high-rate SCD (100) film growth |
| Filament Material | Tantalum (Ta) | — | Replaces traditional W filaments for reduced carbon contamination |
| Plasma Method | Point-arc remote plasma CVD | — | Selective-area high-quality SCD growth |
| Doping Method (Front Cover) | In-situ metal doping during epitaxy | — | MAT technique for TD suppression |
| Co-doping Study | Boron + Nitrogen co-doping | — | Defect and TD engineering in SCD |
| Optical Diagnostic | Optical Emission Spectroscopy (OES) | — | Real-time plasma monitoring during phosphorus doping |
| Color Center Creation | Single ion implantation with high spatial resolution | — | NV and G4V center deterministic placement |
| Photonic Structure Type | Grating coupler, nanopillars, NCD membranes | — | Diamond-on-insulator photonic platforms |
| Etch Pit Detection Method | Chemical defect revelation | — | Threading dislocation density mapping |
| Detector Type | Irradiated single crystal CVD diamond | — | High-energy particle detection (medical / HEP) |
| Junction Type | Diamond pn-junction | — | Leakage site identification for power electronics |
| Electrode Fabrication | Femtosecond laser direct writing | — | Ohmic contact formation on diamond |
| Substrate Material (Front Cover) | Semi-transparent boron-doped diamond | — | Optoelectronic a-SiC:H device integration |
| Device Highlighted (Front Cover) | Schottky barrier diode (SBD) | — | Performance benchmark for TD reduction efficacy |
| Step # | Process Category | Methodology Description |
|---|
| 1 | Substrate Preparation | High-purity SCD substrates (HPHT or CVD) with controlled surface termination to minimize inherited TDs |
| 2 | Epitaxial Growth (Front Cover) | Homoepitaxial CVD with in-situ metal doping (MAT) to terminate threading dislocations at the substrate/epilayer interface |
| 3 | High-Rate Growth (Article 2) | HFCVD with tantalum filaments operated at 3000°C to achieve accelerated (100)-oriented SCD deposition |
| 4 | Selective Growth (Article 4) | Point-arc remote plasma CVD enables mask-free selective deposition of high-quality SCD |
| 5 | Doping Integration (Articles 3, 5) | Co-doping with B+N during growth; plasma-monitored phosphorus incorporation via OES |
| 6 | Defect Engineering (Articles 6, 8, 10) | Single-ion implantation with channeling control, nanopillar patterning, and etch pit revelation for TD mapping |
| 7 | Surface Processing (Articles 7, 9) | Planarization of NCD for photonic structures; angled sidewall optimization for grating coupler efficiency |
| 8 | Device Fabrication (Articles 11-14) | pn-junction leakage analysis, femtosecond laser electrode writing, SBD fabrication, and a-SiC:H deposition on BDD |
| 9 | Characterization | Electrical (leakage, Schottky behavior), optical (emission spectroscopy), and structural (etch pit density) validation |
| 6CCVD Material | Relevance to Highlighted Research |
|---|
| Optical Grade Single Crystal Diamond (SCD) | Essential for color center work (NV, G4V), ion implantation substrates (Articles 6, 8), and grating couplers (Article 9) |
| Boron-Doped Diamond (BDD) | Required for the transparent BDD substrates referenced in Article 14 (a-SiC:H optoelectronics) and for Schottky barrier diode fabrication (Front Cover) |
| Polycrystalline Diamond (PCD) | Suitable for HFCVD growth studies (Article 2) and large-area detector applications (Article 11) |
| Undoped / High-Purity SCD | Optimal starting substrate for MAT technique and quantum sensing applications |
- Wafer Dimensions: 6CCVD produces PCD plates/wafers up to 125mm with SCD/PCD thicknesses spanning 0.1 µm to 500 µm and substrates up to 10mm — directly applicable to the varied device geometries in this collection.
- Metalization Services: In-house capability for Au, Pt, Pd, Ti, W, and Cu metallization layers — enabling rapid prototyping of the Schottky barrier diodes (Front Cover), ohmic contacts (Article 13), and pn-junction electrodes (Article 12) featured throughout the issue.
- Laser Cutting & Shaping: Custom laser cutting supports the non-standard geometries demanded by nanopillar membranes, grating couplers, and femtosecond-laser-defined electrode patterns.
- Polishing Quality: Sub-nanometer Ra (<1nm for SCD, <5nm for inch-size PCD) — a prerequisite for the low-scatter photonic structures and high-resolution ion implantation work described in Articles 6-9.
- 6CCVD’s in-house PhD-level engineering team can assist with:
- Selecting the appropriate SCD vs. PCD vs. BDD grade for quantum, photonic, or power-electronics projects.
- Defining optimal doping profiles (B, N, P, or MAT metal dopants) to suppress threading dislocations and improve device yield.
- Designing custom metallization stacks and die geometries to replicate or extend the Schottky diode and pn-junction work highlighted in the Front Cover article.
For custom specifications, material consultation, or engineering support on diamond-based quantum, photonic, or power-electronic device development, visit 6ccvd.com or contact our engineering team directly.
View Original Abstract
It is our pleasure to present this Topical Section of Physica status solidi (a) highlighting recent advances in diamond science and technology. Diamond is an essential and foundational building block of many emerging fields of basic science and technical applications. It is at the heart of methods and concepts in quantum technologies - identified by the European Union as major research topic in its flagship program. Here, e.g. color centers like the nitrogen-vacancy (NV) centre or group-IV vacancy centers (G4V) are explored as sensors for magnetic and electric fields in quantum sensing or as local nodes and spin-photon interfaces in quantum communication scenarios. Such applications enormously profit from the advances in chemical vapour deposition (CVD) and high pressure high temperature (HPHT) growth of high purity single crystal diamond material with low defect density. The latter property, on the other hand, together with long-term research on the deterministic doping of diamond with the goal of creating semiconductor structures, drives the field of high-power and high-temperature device applications. Life sciences see nanodiamonds being developed as fluorescence markers with functionalized surfaces, agents for drug delivery and promotors of photocatalysis. Eventually, diamond material is widely used for detectors in medical diagnostic systems and high energy physics. Besides material development, a wide range of supporting techniques like ion implantation, nano-structuring, and targeted surface termination enable applications in (nano-)photonics, sensing, field emission sources, photocatalytics and many more. This special issue presents a kaleidoscope of the fascinating various aspects of diamond for science and technology. We are pleased to highlight as the front cover the Feature Article by Shinya Ohmagari and co-workers on control of dislocations in diamond for the production of high-performance diamond electronics.1 A major obstacle limiting diamond electronics is the occurrence of defects in the diamond material, which deteriorate device properties. The most frequent type of such defects, threading dislocations (TDs), are normally inherited from substrate to epitaxial layer such that control and annihilation of their propagation are important. In their article, Ohmagari et al. investigate a method named metal-assisted termination (MAT) technique to prevent TD propagation by in-situ metal doping. They find a large reduction of TD density and improved characteristics of an electronic device (Schottky barrier diode), paving the way towards realization of high-performance diamond electronics. We hope that this Feature Article and the Topical Section on “Recent Advances in Diamond Science and Technology” will broaden the basic knowledge of the field and help to inspire future research. We believe that this encourages not only the diamond community but also related and complementary research fields. Saarbrücken, and Hasselt, September 2019