Skip to content

Group growth of polycrystalline diamond coating by MPCVD technique on a hard alloy tool with a thin blade

MetadataDetails
Publication Date2019-11-01
JournalJournal of Physics Conference Series
AuthorsE. E. Ashkinazi, А. Ф. Попович, V. Yu. Yurov, Vadim Sedov, Д. Н. Совык
InstitutionsTver State University, National Research Nuclear University MEPhI
Citations2
AnalysisFull AI Review Included
  • Core Challenge: Coating thin, non-planar WC-Co (3% Co) cutting blades with uniform Polycrystalline Diamond (PCD) via MPCVD without suffering from “edge effect” overheating or cobalt diffusion.
  • Methodology Innovation: Utilized a specialized shielding ring (plateholder) inside an ARDIS-100 (2.45 GHz, 5 kW) MPCVD reactor. Adjusting the vertical position ($\Delta h$) of the substrate relative to the ring controls deposition temperature without altering core plasma parameters.
  • Dual-Layer Film Architecture: A 12 µm total thickness using a 2.5 hr Microcrystalline Diamond (MCD) base layer followed by a 2.5 hr Nanocrystalline Diamond (NCD) top layer to balance adhesion with low surface roughness.
  • Barrier Layer Engineering: Implemented a multi-step chemical etch (Murakami’s reagent & Caro acid) to remove cobalt, followed by a magnetron-sputtered Tungsten (W) interlayer (10-600 nm) with preliminary ion activation to prevent graphitization.
  • Thermal Modeling Success: Finite Element Method (FEM) modeling in AutoCad 3D and Ansys mapped temperature differentials of 80-138 °C between the cutter body and the protruding tip, enabling stable growth despite the protruding geometry.
  • Massive Performance Gains: Group coating of up to 50 cutters simultaneously achieved in a single reactor cycle, delivering a 11.5x productivity increase, 2.3x cutting speed, and 5.0x feed rate when machining FQTCC composites.
  • Validates Production Scale: Proves that custom substrate holder geometry can shift MPCVD from a single-wafer laboratory technique to a high-throughput industrial coating process.
ParameterValueUnitContext
Microwave Frequency2.45GHzARDIS-100 MPCVD Reactor
Microwave Power3.15kWContinuous wave deposition
Operating Pressure60TorrLow-pressure CVD regime
Base Substrate Temperature800°CMeasured via Williamson PRO-81-35-C dual-band pyrometer
MCD Gas Flow (CH4/H2/N2)20 / 480 / 0sccmMicrocrystalline nucleation/adhesion layer
MCD Growth Duration2.5hrBase layer synthesis time
NCD Gas Flow (CH4/H2/N2)20 / 460 / 20sccmNanocrystalline top layer for low friction
NCD Growth Duration2.5hrSurface finishing layer synthesis time
Final Diamond Thickness12µmTotal bilayer film thickness
Tungsten Interlayer Thickness10 - 600nmDiffusion barrier and adhesion promoter
Interlayer Sputtering Pressure< 0.25 (stage 1) / 0.5-0.7 (stage 2)PaMagnetron deposition conditions
Hard Alloy CompositionWC - 3% Cowt. %Tungalloy commercial grade
Wedge Tip Angle60°Geometric protrusion angle
Empirical vs. Calculated Tip $\Delta$T80 - 138°CTemperature variance between bulk and tip
Pyrometer Emissivity Ratio0.98-Calibrated against S-type thermocouple
Pyrometer Measurement Accuracy± 30°CValidated up to 1200 °C
Ring Internal Radius Limit90mmCritical diameter for E01 wave cutoff
Simultaneous Group Coating Capacity50cuttersSingle-batch batch processing
Machining Performance Gain11.5xProductivity vs. uncoated tool
Cutting Speed Improvement2.3xRPM range 4400 to 10000
Feed Rate Improvement5.0xmm/min range 440 to 2200
  • Substrate Preparation (Cobalt Removal):
    • Chemical etching using Murakami’s reagent and Caro acid to eliminate surface cobalt binder phase.
    • Prevents catalytic graphitization of the diamond film at the WC-Co interface.
  • Barrier Layer Deposition (Magnetron Sputtering):
    • Stage 1: Ion beam activation of the WC-Co substrate.
    • Stage 2: Deposition of a 10-30 nm tungsten underlayer at < 0.25 Pa.
    • Stage 3: Bulk growth of W layer at 0.5-0.7 Pa up to 600 nm total thickness.
  • Reactor Configuration:
    • Reactor: ARDIS-100 (Optosystems Ltd.) operating at 2.45 GHz / 5 kW.
    • Custom shielding ring plateholder used to suppress the “edge effect”.
    • Vertical adjustment ($\Delta h$) of the substrate inside the ring controls in-situ deposition temperature without modifying plasma power or pressure.
  • Diamond Growth Recipe (Bilayer Process):
    • Layer 1 (MCD): 20 / 480 / 0 sccm CH4/H2/N2 at 800 °C for 2.5 hours.
    • Layer 2 (NCD): 20 / 460 / 20 sccm CH4/H2/N2 for 2.5 hours.
    • Total thickness: 12 µm.
  • Thermal Modeling:
    • 3D FEM construction in AutoCad.
    • Stationary thermal problem solved in Ansys to map tip vs. bulk thermal gradients.
    • Calibrated against black-body calibration films to correct emissivity in the Williamson pyrometer.
  • Performance Verification:
    • Morphological inspection via SEM (JEOL JSM-6510LV).
    • Practical milling trials on FQTCC composites using a VM 12-500 3-axis CNC machine.

This research highlights the critical transition of MPCVD from laboratory synthesis to scalable industrial engineering, where thermal modeling, substrate geometry, and barrier interlayers dictate final performance. 6CCVD provides the exact infrastructure required to extend these results.

  • Applicable Materials:

    • For the base MCD layer (adhesion-promoting microcrystalline structure on complex WC-Co geometries), 6CCVD supplies custom Optical and Mechanical Grade PCD wafers/plates manufactured under tightly controlled temperature gradients analogous to the ARDIS-100 process.
    • For the low-roughness NCD top layer (the cauliflower morphology with 0.2-0.4 µm crystallites seen in the SEM), 6CCVD offers Nanocrystalline Diamond (NCD) films optimized for tribological wear applications.
    • 6CCVD’s Heavy Boron-Doped PCD and Intrinsic SCD platforms are also available for applications where electrical conductivity or optical transparency is required alongside extreme mechanical hardness.
  • Customization Potential:

    • The paper’s dependence on tungsten (W) barrier layers aligns perfectly with 6CCVD’s internal metalization capabilities. 6CCVD routinely deposits Ti, W, Pt, Au, Pd, and Cu films with thicknesses tailored to specific substrates.
    • 6CCVD provides precision laser cutting and shaping for non-planar geometries such as the 60° wedge-shaped Tungalloy cutters described, ensuring that the diamond coating interface remains intact at stress-concentration points.
    • For substrates requiring complex thermal management, 6CCVD can fabricate custom molybdenum holders and shielding rings to replicate the group-growth architecture demonstrated in this study.
  • Engineering Support:

    • 6CCVD’s in-house PhD engineering team is equipped to perform FEM thermal modeling (using Ansys or equivalent) and to advise on coefficient-of-thermal-expansion (CTE) matching between your diamond film and WC-Co, Si, or Si3N4 substrates.
    • We specialize in mitigating cobalt diffusion and edge effects for manufacturers of cutting tools, wear parts, and chemical processing electrodes, translating academic coating recipes into repeatable, high-yield production cycles.
  • Call to Action:

    • To replicate the 11.5x productivity improvement in your own machining operation or to develop a custom MPCVD coating recipe for composite machining, consult directly with our materials engineering department.
    • For custom specifications, material consultation, or a technical quote, visit 6ccvd.com or contact our engineering team directly.
View Original Abstract

Abstract A coating technology for application of hardening of diamond coatings on carbide tools for treatment of mineral fiberglass based on quartz texture with chromate-phosphate cohesive (FQTCC) is proposed. The purpose of this development is to increase the edge strength of the tool. The use of the technology described above allowed, in comparison with the cutter without diamond coating, to increase the productivity of processing by 11.5 times, by cutting speed by 2.3 times, and by the minute supply by 5.0 times. The approach is based on changing the configuration of the microwave field when applying a diamond coating on hard alloy substrates in the microwave plasma of the ARDIS-100 reactor by using specially designed plateholders. This method allows for the group coating on several substrates in a single process. A simplified mathematical model for calculating the temperature of the top of the cutter during the growth of a CVD diamond film, taking into account heat transfer through thermal conductivity and radiation, has been constructed. Temperature distribution on the surface of a tungsten carbide cutter in the temperature range optimal for diamond growth was constructed. The difference between the average (experimental) and maximum (calculated) temperature in such a cutter was from 80 to 138°C.

  1. 1990 - Texture formation in polycrystalline diamond f [Crossref]
  2. 2013 - Synthesis of high-quality diamond coatings by methods of activated chemical vapor deposition
  3. 2001 - MPCVD diamond tool cutting-edge coverage: dependence on the side wedge angle [Crossref]
  4. 2017 - Plateholder design for deposition of uniform diamond coatings on WC-Co substrates by microwave plasma CVD for efficient turning application [Crossref]
  5. 2013 - Mechanistic force modeling for milling of carbon fiber reinforced polymers with double helix tools
  6. 2012 - Recent advances in the deposition of diamond coatings on Co-cemented tungsten carbides [Crossref]