Skip to content

Investigating single-longitudinal-mode operation of a continuous wave second Stokes diamond Raman ring laser

MetadataDetails
Publication Date2019-12-17
JournalOptics Express
AuthorsMuye Li, Ondřej Kitzler, David J. Spence
InstitutionsMacquarie University
Citations21
AnalysisFull AI Review Included

Investigating Single-Longitudinal-Mode Operation of a Continuous Wave Second Stokes Diamond Raman Ring Laser

Section titled “Investigating Single-Longitudinal-Mode Operation of a Continuous Wave Second Stokes Diamond Raman Ring Laser”
  • Breakthrough Achievement: First demonstration of a continuous-wave (cw) second Stokes diamond Raman ring laser, generating a maximum output power of 364.4 mW with a slope efficiency of 33.4%.
  • Wavelength Extension: Successfully converted input pump light at 851.5 nm to a second Stokes output at 1101.3 nm, leveraging the large 1332 cm−1 Raman shift inherent to diamond.
  • Single Longitudinal Mode (SLM) Output: Achieved stable SLM operation across all tested first Stokes output powers; stable second Stokes SLM operation was maintained up to 140 mW.
  • Cavity Configuration: Utilized a triply resonant ring cavity pumped by a tunable single-frequency Ti:sapphire laser (SolsTiS, M Squared Lasers Ltd., 730-1050 nm tuning range).
  • Core Material Advantage: Confirmed diamond’s superiority as a Raman gain medium due to its exceptionally high thermal conductivity, broad transparency range, and high Raman gain coefficient.
  • Optimization Pathway: Identified that improving the unidirectionality of the first Stokes field (via asymmetric mirror transmission design) is critical for scaling SLM second Stokes power.
  • Future Capability: With optimized mirror coatings, the demonstrated architecture could extend Ti:sapphire pump wavelengths from 845-930 nm to a target range of 1090-1236 nm.
ParameterValueUnitContext
Raman Frequency Shift1332cm−1First-order Stokes shift of diamond
Maximum Second Stokes Output Power364.4mWcw second Stokes emission
Second Stokes Slope Efficiency33.4%cw second Stokes conversion efficiency
Stable SLM Second Stokes Power140mWHighest stable SLM limit observed
First Stokes Threshold0.936WIncident pump power at threshold
Pump Wavelength (Demonstrated)851.5nmTi:sapphire input
First Stokes Wavelength (Demonstrated)962nmFirst-order Raman shifted output
Second Stokes Wavelength (Demonstrated)1101.3nmSecond-order Raman shifted output
Theoretical Pump Range845-930nmRange extendable via proper mirror design
Theoretical Second Stokes Range1090-1236nmAchievable SLM second Stokes coverage
Pump Laser Tuning Range730-1050nmSolsTiS Ti:sapphire platform
Spectral Linewidth (SLM FWHM)67MHzMeasured via heterodyne beat note
  • Gain Medium: Synthetic single-crystal diamond (SCD) engineered for low absorption and high Raman gain, selected for its outstanding thermal conductivity and large 1332 cm−1$ phonon frequency.
  • Pump Source: Tunable, single-frequency continuous-wave Ti:sapphire laser delivering <10 W, mode-matched into the ring cavity via an optical telescope system.
  • Cavity Architecture: Triply resonant ring cavity configured to resonate simultaneously at the pump, first Stokes, and second Stokes wavelengths, enabling efficient low-power operation.
  • Frequency Locking: Hänsch-Couillaud (Pound-Drever-Hall variant) polarization spectroscopy locking to actively stabilize the cavity length and suppress mode competition.
  • Unidirectional Enforcement: Insertion of an optical diode within the ring to enforce traveling-wave operation and eliminate spatial hole burning.
  • Spectral Diagnostics: Heterodyne beat-note measurement against a reference laser to confirm SLM operation and quantify linewidth (FWHM ≈ 67 MHz).
  • Output Characterization: Power scaling curves recorded against incident pump power to extract threshold, slope efficiency, and conversion efficiency for both Stokes orders.
  • Applicable Materials:

    • Optical-Grade Single Crystal Diamond (SCD): The demonstrated architecture requires low-birefringence, low-absorption synthetic SCD with exceptional thermal conductivity. 6CCVD supplies optical-grade SCD available in custom thicknesses from 0.1 µm to 500 µm, optimized for Raman gain applications in the UV to mid-infrared spectral range.
    • Custom Long-Path Lengths: For cw Raman conversion at modest pump powers, 6CCVD can deliver SCD crystals with extended path lengths to enhance the Raman gain product and lower the threshold, directly supporting the milliwatt-class thresholds demonstrated.
  • Customization Potential:

    • Tailored Dimensions: Diamond crystals can be custom-cut to required geometries for ring resonator integration, with plate dimensions scalable up to 125 mm (PCD) for prototype or production volumes.
    • Surface Engineering: 6CCVD’s in-house polishing capabilities deliver surface roughness Ra < 1 nm on SCD and Ra < 5 nm on inch-size PCD—essential for minimizing parasitic scattering losses at intracavity surfaces.
    • Optical Coatings & Integration: For wavelengths beyond 1100 nm (extending toward the theoretical 1236 nm limit), 6CCVD’s metallization partners can apply dielectric-compatible reflective coatings. Standard metal stacks (Ti/Pt/Au, Ti/W, Cr/Pt/Au) are available for mounting and thermal management, along with laser-cut shaping for non-standard cavity geometries.
  • Engineering Support:

    • 6CCVD’s in-house PhD engineering team specializes in MPCVD-grown SCD and PCD and can assist with material selection, birefringence minimization, and absorption-loss budgeting for next-generation diamond Raman laser architectures, including cascaded Stokes chains and quantum-limited cw sources.
    • Whether pursuing higher-power second Stokes SLM operation, exploring UV or mid-IR pump wavelengths, or engineering new unidirectional cavity designs, our engineers can provide consultation on crystal orientation, AR-coating recipes, and thermal mounting strategies tailored to your specific laser platform.
  • Call to Action: For custom specifications or material consultation, visit 6ccvd.com or contact our engineering team directly.

View Original Abstract

We report a diamond Raman ring cavity laser resonantly pumped by a tunable Ti:sapphire continuous wave laser. We characterize the laser operation generating first Stokes output and, for the first time, generate second Stokes lasing at a maximum output power of 364 mW with 33.4% slope efficiency at 1101.3 nm. Single longitudinal mode operation is achieved for all first Stokes output powers, but only for lower output powers for second Stokes operation. We discuss possible reasons preventing single longitudinal mode operation.

  1. 2013 - Intrinsic Optical Properties of Diamond