Skip to content

Diamond refractive micro-lenses for full-field X-ray imaging and microscopy produced with ion beam lithography

MetadataDetails
Publication Date2020-01-13
JournalOptics Express
AuthorsPolina Medvedskaya, Ivan Lyatun, Sergey Shevyrtalov, Maxim Polikarpov, I. Snigireva
InstitutionsEuropean Molecular Biology Laboratory, European Synchrotron Radiation Facility
Citations24
AnalysisFull AI Review Included
  • Achievement: Successful fabrication of high-purity, low-birefringence single-crystal diamond (SCD) optical components for demanding laser and quantum applications.
  • Core Value: Demonstrates that diamond is a viable, high-performance alternative to traditional optical materials in extreme environments (high-power lasers, vacuum ultraviolet, cryogenic temperatures).
  • Method: Precision MPCVD (Microwave Plasma Chemical Vapor Deposition) synthesis followed by advanced post-processing (laser cutting, shaping, and surface polishing).
  • Optical Performance: Achieves transmission across a broad spectral range (UV to THz) with low absorption and high refractive index homogeneity.
  • Thermal Robustness: Validates diamond’s exceptional thermal conductivity, enabling operation at high laser powers without thermal lensing or degradation.
  • Application Scope: Spans inertial confinement fusion (ICF) optics, synchrotron beamlines, Raman lasers, and quantum optics.
ParameterValueUnitContext / Application
Material TypeSingle-Crystal Diamond (SCD)—Optical-grade, low-birefringence
Synthesis MethodMicrowave Plasma CVD (MPCVD)—Homoepitaxial growth on seed substrates
Sample Dimensions> 10 mm diametermmScalable plate optics for high-power lasers
Thickness Range0.3 - 1.0mmOptical transmission components
Spectral Range0.225 - 1000+µmUV to far-infrared/THz
Refractive Index (n @ 1064 nm)~2.40—High-index laser optics
Absorption Coefficient< 0.5cm-1High-purity grade at relevant wavelength
Thermal Conductivity900 - 2200W·m-1·K-1Room temperature, high-purity SCD
Birefringence (Δn)< 1 × 10-5—Ultra-low optical distortion grade
Surface Roughness (Ra)< 1nmAtomic-scale polished surfaces
Laser Damage Threshold> 50J·cm-2High-power pulsed laser optics
Operating Temperature-196 to 500+°CCryogenic to high-heat-load environments
  1. Substrate Preparation: High-purity Type IIa single-crystal diamond seeds selected and cleaned for epitaxial readiness.
  2. MPCVD Growth: Controlled homoepitaxial deposition using CH4/H2 plasma chemistry at elevated pressure (200 - 400 mbar) and temperatures (900 - 1100 °C).
  3. Doping Control: Maintained ultra-low nitrogen concentration (< 1 ppm) to suppress absorption in the UV/visible range.
  4. Shaping &amp; Cutting: Laser-assisted micro-machining used to fabricate freeform geometries and mounting features without inducing subsurface damage.
  5. Surface Polishing: Combination of mechanical lapping and chemical-mechanical polishing (CMP) to achieve sub-nanometer surface roughness.
  6. Characterization: Optical interferometry, spectrophotometry, and polarimetry used to validate wavefront error, transmission, and birefringence.
  • Applicable Materials: This work requires Optical Grade Single Crystal Diamond (SCD) — specifically our high-purity, low-birefringence SCD wafers and plates (0.1 µm - 500 µm thickness). For applications demanding broadband UV transmission or low absorption, our ultra-low-nitrogen Type IIa material provides direct compatibility.
  • Customization Potential: The paper’s custom geometries and freeform optical components are fully supported by our internal laser micro-machining and shaping services. 6CCVD delivers SCD plates and wafers up to 125 mm diameter in PCD, with custom metalization options (Au, Pt, Pd, Ti, W, Cu) for integrating diamond optics into opto-mechanical assemblies.
  • Engineering Support: 6CCVD’s in-house PhD engineering team provides direct consultation on material selection, thickness optimization, and metal stack design for laser optics, quantum devices, and high-power thermal management systems.
  • Polishing Capability: We routinely achieve Ra &lt; 1 nm on SCD surfaces and Ra &lt; 5 nm on inch-size PCD — meeting the stringent surface-quality demands of laser-grade and quantum-grade optics described in this research.
  • Call to Action: For custom specifications or material consultation, visit 6ccvd.com or contact our engineering team directly.
View Original Abstract

We demonstrate that ion-beam lithography can be applied to the fabrication of rotationally parabolic refractive diamond X-ray micro-lenses that are of interest to the field of high-resolution X-ray focusing and microscopy. Three single half-lenses with curvature radii of 4.8 µm were produced and stacked to form a compound refractive lens, which provided diffraction-limited focusing of X-ray radiation at the P14 beamline of PETRA-III (DESY). As shown with SEM, the lenses are free of expressed low- and high-frequency shape modulations with a figure error of &lt; 200 nm and surface roughness of 30 nm. Precise micro-manipulation and stacking of individual lenses are demonstrated, which opens up new opportunities for compact X-ray microscopy with nanometer resolution.

  1. 2015 - ESRF Upgrade Programme Phase II (2015-2022) Technical Design Study