Skip to content

Research progress of large diamond single crystals under high pressure and high temperature

MetadataDetails
Publication Date2020-01-01
JournalActa Physica Sinica
AuthorsYue You, Shangsheng Li, Taichao Su, Meihua Hu, Qiang Hu
Citations6
AnalysisFull AI Review Included

Research Progress of Large Diamond Single Crystals Under High Pressure and High Temperature

Section titled “Research Progress of Large Diamond Single Crystals Under High Pressure and High Temperature”
  • Comprehensive Review: Detailed synthesis parameters and characterization of HPHT diamond single crystals (Ia, Ib, IIa, IIb, and doped) produced via the Temperature Gradient Method (TGM).
  • Defect Engineering & Gettering: Identification of Ti(Cu) as the premier nitrogen getter for synthesizing high-purity IIa-type diamond (nitrogen content < 1 ppm), outperforming traditional Al, Ti, and Zr additives.
  • Advanced Doping Strategies: Systematic evaluation of B, N, S, and P dopants, highlighting B-FeS co-doping as the most effective method to achieve low-resistivity n-type diamond semiconductors (0.096 × 106 Ω·cm).
  • Crystal Habit Control: Established the relationship between axial temperature gradients and the resulting V-shaped growth regions, dictating (100) vs. (111) facet dominance.
  • HPHT Annealing Protocols: Validated conditions (2000 °C-2500 °C, 5.5-6.5 GPa) for converting synthetic Ib-type diamond to Ia-type via nitrogen aggregation (C-centers to A-centers).
  • Multi-Seed Methodology: Review of multi-seed batch production techniques aimed at industrial-scale synthesis, addressing radial temperature uniformity challenges in large cavities.
ParameterValueUnitContext
Annealing Temperature (N aggregation)2000 - 2500°CConversion of Ib to Ia-type diamond
Annealing Pressure5.5 - 6.5GPaRequired for C-center to A-center transition
Annealing Duration40 - 60minEvans & Zeng HPHT annealing process
Crystal Boundary TypeV-shaped RegionN/ADefines transition between (100) and (111) facet dominance
Nitrogen Content (Ib-type)~100 - 1214ppmStandard synthetic diamond baseline
Maximum Nitrogen Content (NaN3 source)1214 - 1257ppmHigh-nitrogen diamond synthesis
Maximum Nitrogen Content (C3H6N6 source)2300ppmHigh-nitrogen diamond synthesis
Minimum Resistivity (S-doped)0.963 × 106Ω·cmN-type semiconductor characteristics
Minimum Resistivity (FeS-doped)0.813 × 106Ω·cmN-type semiconductor characteristics
Minimum Resistivity (NiS-doped)1.163 × 106Ω·cmN-type semiconductor characteristics
Minimum Resistivity (B-S co-doped)0.933 × 106Ω·cmN-type semiconductor characteristics
Minimum Resistivity (B-FeS co-doped)0.0962 × 106Ω·cmBest n-type semiconductor performance
Minimum Resistivity (P-doped)3.561 × 106Ω·cmN-type semiconductor characteristics
Minimum Resistivity (Mn3P2-doped)0.516 × 106Ω·cmN-type semiconductor characteristics
Crystal ClassificationType Ia, Ib, IIa, IIbN/ABased on nitrogen and boron impurities
Getter Composition Ratio4:3Ti:CuOptimal ratio for IIa-type synthesis
  • HPHT Temperature Gradient Method (TGM):
    • Place graphite at the high-temperature end of the synthesis cell.
    • Position seed crystals at the low-temperature end.
    • Establish and maintain an axial temperature gradient to drive carbon diffusion.
  • Nitrogen Gettering (Type IIa Synthesis):
    • Use Fe-based (FeNiCo) or Ni-based (NiMnCo) catalyst alloys.
    • Introduce Ti(Cu) gettering agents at an optimal mass ratio of 4:3 (Ti:Cu).
    • Apply pressure boost and temperature reduction (提压降温) to eliminate microcrystalline graphite precipitation.
  • HPHT Annealing (Type Ia Synthesis):
    • Subject Ib-type diamond crystals to 2000-2500 °C at 5.5-6.5 GPa for 40-60 minutes.
    • Monitor the conversion of dispersed nitrogen (C-centers) to aggregated nitrogen (A-centers).
  • Single-Element Doping (N-type):
    • Sulfur sources: S, FeS, or NiS added to the FeNi-C growth system.
    • Phosphorus sources: elemental P or Mn3P2 added to the FeNiMnCo-C system.
  • Co-Doping Strategy (N-type):
    • Combine boron with sulfur sources (B-FeS) to enhance sulfur incorporation and reduce resistivity.
  • Crystal Morphology Control:
    • Adjust the V-shaped growth region parameters by modifying the temperature gradient.
    • Observe habit transitions from tabular (板状) to tower-like (塔状) along the (100) face.
  • Applicable Materials:

    • Type IIa Diamond (Ultra-Low Nitrogen): For replicating the high-purity crystals discussed in this paper, our Optical Grade Single Crystal Diamond (SCD) provides the necessary baseline purity.
    • Type IIb Diamond (Boron-Doped Semiconductors): Our Heavy Boron-Doped Diamond and Conductive BDD materials are engineered for the p-type semiconductor and superconducting applications highlighted by the authors as future research directions.
    • N-type Doped Semiconductors: For the B-FeS and P-doped low-resistivity diamond detailed in this review, we provide custom MPCVD-grown doped diamond solutions tailored to specific resistivity targets.
    • Polycrystalline Diamond (PCD): For applications requiring larger substrate sizes (up to 125mm) where HPHT single crystal dimensions are restrictive, our Optical Grade PCD offers a scalable alternative.
  • Customization Potential:

    • The paper emphasizes precise control over doping concentrations and crystal orientations (e.g., (100) vs. (111) sectoral analysis). 6CCVD offers full Custom Metalization (Au, Pt, Pd, Ti, W, Cu) to fabricate ready-to-use electrode contacts for characterizing the resistivity and Hall mobility of these doped semiconductors.
    • We provide precision Laser Cutting services to shape HPHT or CVD-grown crystals into specific geometries required for advanced semiconductor testing and device fabrication.
    • Our polishing capabilities (Ra < 1nm for SCD, < 5nm for inch-size PCD) ensure the surface quality required for epitaxial overgrowth, addressing the surface defect control challenges mentioned in the review.
  • Engineering Support:

    • Navigating the complex V-shaped growth dynamics and gettering mechanisms (e.g., Ti/Cu ratios) requires deep materials expertise. 6CCVD’s in-house PhD engineering team specializes in HPHT and CVD diamond synthesis, enabling us to provide expert material consultation for your specific diamond semiconductor, thermal management, or optical window projects.
    • We can assist in selecting the optimal diamond grade and metallization scheme for applications ranging from high-power laser heat sinks to quantum sensing (NV centers) and diamond anvil cells.
  • Call to Action:

    • For custom specifications, doped diamond consultation, or material selection assistance, visit 6ccvd.com or contact our engineering team directly.
View Original Abstract

Diamond has a series of extreme characteristics superior to other materials, and also very wide application scope. The large diamond single crystal can play a role in its functional characteristics, which has become a research hotspot. In this paper, we introduce the principle and process of synthesizing large diamond single crystal by temperature gradient method (TGM) under high pressure and high temperature (HPHT), and summarizes the research status and research directions of different types of and additives-doped large diamond single crystals respectively. The principle of the temperature gradient method is that the carbon source, driven by the temperature gradient, diffuses from the high concentration region at the high temperature end to the low concentration region at the low temperature end, and diamonds are grown on the seed crystal. The growth rate of diamond crystal is controlled by adjusting the axial temperature gradient at synthesis cell, and the shape growth of Ib-type large diamond is controlled by the distribution in the V-shaped growth area. We introduce different kinds of diamond large single crystals from five aspects. Firstly, the Ia-type diamond large single crystal can be obtained by the annealing treatment of Ib-type diamond under HPHT. The conversion rate of C centre to A centre for nitrogen in diamond is improved by optimizing the conditions of HPHT. Secondly, the Ib-type larger diamond is studied very much in the following areas: the analysis of its surface characteristic, the control of inclusions and cracks, the precipitation mechanism and the elimination measures of regrown graphite and the mass production technology of multiseed method. Thirdly, IIa-type large diamond single crystal is introduced in which the nitrogen getter is selected due to the ability Al and Ti (Cu) to getter nitrogen, the catalyst is selected because of its effect on the nitrogen content in the diamond synthesized with Fe or Ni based catalyst, and the elimination method of microcrystalline graphite precipitation is presented by analyzing its mechanism. Fourthly, the boron elements exist in IIb-type diamond and have influence on the growth characteristics of synthetic diamond. Fifthly, introduced is the research status of diamond synthesized with B, N, S, P doping elements, in which its individual substance or their compound is used as a doping source or boron and other elements with small radius are used as co-doping agent. Then S or P with B co-doping is more conducive to the improvement of the performance of n-type diamond large single crystal semiconductor. Therefore, it is proposed that the large diamond single crystal need strengthening in mass production of IIa-type large diamond single crystal, superconducting characteristics of IIb-type large diamond single crystal, and doping of n-type semiconductors.