Charge stability of nitrogen-vacancy color centers in organic nanodiamonds
At a Glance
Section titled “At a Glance”| Metadata | Details |
|---|---|
| Publication Date | 2020-04-09 |
| Journal | Optical Materials Express |
| Authors | Masfer Alkahtani, Philip Hemmer |
| Institutions | Texas A&M University, King Abdulaziz City for Science and Technology |
| Citations | 15 |
| Analysis | Full AI Review Included |
Executive Summary
Section titled “Executive Summary”- Core Challenge: Stochastic photo-induced charge-state switching between the negatively charged (NV−) and neutral (NV0) states of nitrogen-vacancy centers in nanodiamonds (NDs) degrades performance in quantum sensing and bio-imaging.
- Key Finding: Charge stability is not strictly size-dependent; it is controlled by the concentration of substitutional nitrogen (P1) electron donors, which is directly tunable via diamond growth temperature.
- Methodology: High-pressure, high-temperature (HPHT) synthesis within a Diamond Anvil Cell (DAC) at 10 GPa, comparing “slow” (400°C, 24h) and “fast” (650°C, 3h) growth regimes.
- Critical Trade-off: Slow growth (400°C) yields ultra-pure FNDs with strong charge-state switching (ideal for super-resolution microscopy), while fast growth (650°C) yields highly doped FNDs with highly stable NV− states (ideal for red-light bio-sensing).
- Processing Requirement: Post-synthesis ion implantation (50 keV He+, 2 × 1013 ions/cm2) followed by vacuum annealing (750°C, 2h) is mandatory to mobilize vacancies and form active NV centers.
- Strategic Value: Enables preselection of ND batches to match specific optical excitation requirements (green, blue, or red CW lasers) without relying on post-processing charge trap engineering.
Technical Specifications
Section titled “Technical Specifications”| Parameter | Value | Unit | Context |
|---|---|---|---|
| Growth Pressure | 10 | GPa | Diamond Anvil Cell (DAC) environment |
| Slow Growth Temperature | 400 | °C | Low impurity incorporation regime |
| Fast Growth Temperature | 650 | °C | High substitutional nitrogen (P1) regime |
| Slow Growth Duration | 24 | h | Extended nucleation phase |
| Fast Growth Duration | 3 | h | Accelerated carbon precipitation |
| Carbon Source | Heptamethylnonane / Tetracosane | — | Cracked hydrocarbon precursor |
| Seed Molecule | 1-Adamantylamine | — | Diamond-like molecular seed (20 µL volume) |
| Nitrogen Source | Tetramethylhydrazine | — | Provides P1 donors (10 µL volume) |
| Lattice Spacing (ND) | 2.06 | Å | Confirmed (111) diamond planes via TEM |
| Ion Implantation Energy | 50 | keV | Helium (He+) post-irradiation |
| Ion Dose | 2 × 1013 | ions/cm2 | Vacancy creation dose |
| Pre-Anneal Temp | 550 | °C | Volatile component burn-off (8 min) |
| Post-Anneal Temp | 750 | °C | Vacancy mobilization to form NV (2 h) |
| Excitation Lasers | 473, 532, 637 | nm | Blue, Green, Red CW sources |
| Excitation Power | 200 | µW | Standard measurement condition |
| NV0 ZPL | 575 | nm | Neutral charge state emission |
| NV− ZPL | 637-638 | nm | Negative charge state emission |
| ODMR Contrast (Slow) | 11 | % | Low-T, low-N sample |
| ODMR Contrast (Fast) | 4.7 | % | High-T, high-N sample |
| Objective NA | 0.90 | — | 100x confocal collection |
Key Methodologies
Section titled “Key Methodologies”- High-Pressure DAC Synthesis: Mix seed (1-Adamantylamine), carbon source (Heptamethylnonane/Tetracosane), and nitrogen donor (Tetramethylhydrazine) in a Diamond Anvil Cell at 10 GPa.
- Thermal Tuning of Impurities: Adjust internal oven temperature to either 400°C (24 h) for high-purity FNDs or 650°C (3 h) for nitrogen-rich FNDs to control P1 donor density.
- In-Situ Optical Monitoring: Use custom confocal/Raman spectrometer to monitor ruby fluorescence and reaction progress through DAC windows.
- Sample Extraction: Recover nanocrystals from the DAC chamber using a 2 µm-tip needle, dispersing the product into an isopropanol/ethanol suspension.
- TEM Verification: Confirm crystallinity and diamond (111) lattice spacing (2.06 Å) via transmission electron microscopy.
- Vacancy Engineering: Deposit NDs onto silicon chips; pre-bake at 550°C (8 min) to remove solvent residue.
- Ion Implantation: Irradiate with 50 keV He+ ions at a dose of 2 × 1013 ions/cm2 to generate lattice vacancies.
- Thermal Annealing: Vacuum anneal at 750°C for 2 hours to mobilize vacancies toward nitrogen atoms, forming active NV centers.
- Confocal Spectroscopy & ODMR: Characterize charge-state switching and spin resonance properties under 473 nm, 532 nm, and 637 nm CW laser excitation.
6CCVD Solutions & Capabilities
Section titled “6CCVD Solutions & Capabilities”- Applicable Materials: For researchers requiring bulk or thin-film analogs of these HPHT nanodiamonds, 6CCVD supplies Optical Grade Single Crystal Diamond (SCD) and Nitrogen-Doped Polycrystalline Diamond (PCD). Our MPCVD process allows precise nitrogen incorporation control (from ultra-high purity to engineered doping levels) to dictate NV charge stability, replicating the “slow” vs. “fast” growth tunability demonstrated in this study.
- Customization Potential: The paper highlights the necessity of post-growth ion implantation. 6CCVD can deliver materials pre-cut to your exact ion-beam targeting dimensions (laser-cut to <100 µm features) and offers custom metalization (Ti/Pt/Au is our standard stack; Au, Pt, Pd, W, and Cu available) to facilitate direct integration into your quantum or bio-sensing experimental rigs without intermediary processing steps.
- Engineering Support: Selecting between ultra-pure diamond for super-resolution switching and donor-rich diamond for stable magnetic sensing is application-critical. 6CCVD’s in-house PhD engineering team can consult on optimizing nitrogen concentration, thickness (0.1 µm - 500 µm SCD/PCD), and surface roughness (Ra < 1 nm for SCD) for your specific NV magnetometry, quantum information, or bio-sensing architecture.
- Call to Action: For custom specifications, tailored doping profiles, or material consultation for your NV-center or quantum sensing project, visit 6ccvd.com or contact our engineering team directly.
View Original Abstract
The negatively-charged nitrogen-vacancy (NV) color center in diamond undergoes stochastic charge state transitions between the negatively charged state ( NV − ) and the neutral charged state ( NV o ) upon optical illumination. While the negative charge state is normally preferred for magnetic sensing, optically-controlled switching between charges states is often desirable, for example in super-resolution imaging. The concentration of electron donor impurities in (bulk/nano) diamond crystals determine how much optical control can be exercised over the NV − and NV o charge states. Here we report how the growth speed of nanodiamonds (NDs) can control the concentration of substitutional nitrogen (P1) donors, ranging from highly pure to highly doped diamond. Hence by growth temperature, it is possible to tune the stability of the NV charge state to optimally match the intended application. This work has many promising bio-sensing applications, especially for super-resolution magnetic-sensing with the NV color center.