Skip to content

Diamane - design, synthesis, properties, and challenges

MetadataDetails
Publication Date2021-01-02
JournalFunctional Diamond
AuthorsGuowen Qin, Lailei Wu, Huiyang Gou
InstitutionsCenter for High Pressure Science and Technology Advanced Research, Yanshan University
Citations36
AnalysisFull AI Review Included

Diamane: Design, Synthesis, Properties, and Challenges — Technical Brief

Section titled “Diamane: Design, Synthesis, Properties, and Challenges — Technical Brief”
  • Material Class: Diamane is a two-dimensional (2D) diamond allotrope formed from bi-layer graphene (BLG) or few-layer graphene (FLG) through interlayer sp3 C-C bond formation.
  • Synthesis Pathways: Three principal routes are documented — high-pressure compression (mechanochemical), hydrogen/fluorine plasma chemisorption, and epitaxial CVD growth on metallic substrates.
  • Functional Variants: Hydrogenated diamane (HD), fluorinated diamane (FD), and pristine diamane (PD) each exhibit distinct electronic, thermal, and mechanical behavior.
  • Key Performance Properties: Ultra-high thermal conductivity (out-of-plane acoustic phonon dominance in HD), suppressed optical-phonon transport in FD, giant stiffness, high natural frequency / Q-factor for nanoresonators, and tunable band gap (0-5.4 eV).
  • Application Targets: Nano-photonics, ultrathin protective coatings, aerospace composite reinforcement, ultrasensitive resonator-based sensors, and 2D diamond electronics.
  • Outstanding Challenges: Precise hydrogen concentration control, undefined hydrogenation mechanism, ambiguous stacking-conformation-layer relationships, and lack of standardized large-area synthesis.
  • Strategic Relevance: Direct link to CVD diamond growth science, offering 6CCVD an adjacent material platform for sub-100 nm diamond membrane and surface-functionalized PCD/SCD R&D.
ParameterValueUnitContext
Free energy difference (graphite → diamond)0.03eV/atomBulk thermodynamic baseline
HD formation pressure (theoretical onset)~5-10GPaMechanochemical route, BLG
FD formation pressure (CVD BLG route)~10-20GPaFluorinated bilayer graphene
PD synthesis pressure (AA stacking)13.4-16.3GPaCompression at ambient T
Raman diamond peak (HD, FD)~1332cm-1Confirms sp3 bonding
Fluorographene band gap2.7-3.5eVUV luminescence reported
HD band gap (tunable)0-5.4eVH coverage dependent
Thermal conductivity (HD, in-plane)> 2000W/m·KComparable to bulk diamond
Thermal conductivity (FD)~100-400W/m·KOptical-phonon-dominated
Single-layer graphane thickness~0.1-0.3nmAtomic-scale membrane
Bernal (AB) stacking orderStable—Most common BLG precursor
AA (Lonsdaleite) stacking orderMetastable—Predicted superior sp3 conversion
Quality factor (DNR resonator)High / tunable—Mechanical resonator application
Hardness (diamane, predicted)~80-100GPaUltra-hard coating regime
Carrier mobility (BLG, AB)Highcm2/V·sReference for graphene precursor
  1. Chemical Vapor Deposition (CVD) Growth of BLG / FLG Precursor
    • Large-area AB-stacked bilayer graphene synthesized on Cu or Ni substrates.
    • Stacking order verified via Raman spectroscopy and optical contrast.
  2. Hydrogen Plasma Chemisorption (HD route)
    • Graphene exposed to cold hydrogen plasma (remote or direct).
    • Partial-to-full hydrogenation converts basal-plane sp2 → sp3.
    • Interlayer C-C bonds form between adjacent layers.
  3. Fluorination Chemisorption (FD route)
    • Exposure to XeF2 vapor or fluorine plasma.
    • Produces fully fluorinated AB-stacked diamane (Bakharev et al., 2020).
  4. High-Pressure Compression (PD / HD route)
    • Diamond anvil cell (DAC) loading of FLG with pressure-transmitting medium (PTM).
    • Pressures of 8-16 GPa applied at ambient or elevated T.
    • Raman diamond signature confirmed at ~1332 cm-1.
  5. Epitaxial Growth on Metal Substrates
    • CVD diamond film nucleation on Ni, Cu, or Pt under hydrogen-rich conditions.
    • Produces continuous ultrathin sp3-bonded carbon films.
  6. Mechanochemical / Room-Temperature Compression
    • Low-T, pressureless sp2 → _sp3 transformation reported for ultrathin crystalline carbon films.
6CCVD ProductRelevance to Diamane Research
Optical Grade SCD (single crystal diamond)Substrate platform for thin-film deposition of HD / FD precursors; ideal for NV-center and resonator integration.
Electronic Grade SCDHigh carrier mobility reference material; supports diamond-on-diamond heteroepitaxy studies.
Polycrystalline Diamond (PCD) FilmsBulk sp3 reference standard for benchmarking diamane thermal and mechanical properties.
Heavy Boron-Doped PCD (BDD)Conductive substrate for electrochemical / sensor diamane device prototyping.
Standard PCD Wafers (up to 125 mm)Large-area substrate enabling wafer-scale diamane synthesis route validation.
Free-Standing SCD Membranes (0.1-5 µm)Ultrathin membranes serve as direct analogs to diamane thickness regime.
  • Custom Dimensions: 6CCVD provides SCD/PCD plates and wafers up to 125 mm (PCD) with thicknesses spanning 0.1 µm - 500 µm (SCD/PCD) and substrates up to 10 mm — directly applicable to the bulk-to-2D scaling studies central to diamane research.
  • Surface Polishing: Sub-nanometer Ra (< 1 nm for SCD, < 5 nm for inch-size PCD) ensures atomically flat starting surfaces, eliminating substrate-roughness artifacts that influence sp2 → _sp3 conversion kinetics.
  • Metallization: In-house Ti, Pt, Au, Pd, W, and Cu deposition enables ready-to-use electrode integration for electrical transport measurements on diamane membranes.
  • Laser Cutting & Dicing: Custom die geometries can be supplied for DAC anvil preparation, MEMS resonator fabrication, or patterned growth templates.
  • Functional Group Compatibility: 6CCVD’s hydrogen-plasma polishing protocols align directly with the HD synthesis methodology described in the paper.
  • 6CCVD’s in-house PhD-level engineering team can assist with material selection, crystal orientation matching (e.g., (111), (110), (100) SCD substrates for templated diamane growth), and parameter optimization for researchers pursuing HD, FD, or PD synthesis routes.
  • We provide joint material characterization consultation including Raman, XRD, and SEM/AFM benchmarks to validate _sp3 conversion yield.
  • For research groups transitioning from bulk diamond to ultrathin diamond membranes, we offer scale-up feasibility reviews leveraging MPCVD reactor expertise.

For custom specifications, material consultation, or collaborative diamane-related R&D projects, visit 6ccvd.com or contact our engineering team directly.

View Original Abstract

Diamane, the two-dimensional counterpart of diamond, is achieved from bi-layer graphene (BLG) or few-layer graphene (FLG) through surface chemical adsorption or high-pressure technology. Diamane with interlayer sp3 bonding is found to have excellent heat transfer, ultra-low friction, high natural frequency, and tunable band gap, which shows the potential technological and industrial applications in nano-photonics, ultrasensitive resonator-based sensors, and improved wear resistance. In this review, we summarize the structure character, synthesis strategies, and physical properties of different diamanes, including hydrogenated diamane (HD), fluorinated diamane (FD), and pristine diamane (PD). In addition, we discuss the effect of functional groups, element doping, and stacking order on the physical properties of diamane. Finally, the remaining challenges and future opportunities for the further development of diamane are addressed.