Skip to content

345-MW/cm² 2608-V NO₂ p-Type Doped Diamond MOSFETs With an Al₂O₃ Passivation Overlayer on Heteroepitaxial Diamond

MetadataDetails
Publication Date2021-04-26
JournalIEEE Electron Device Letters
AuthorsNiloy Chandra Saha, Seong‐Woo Kim, Toshiyuki Oishi, Yuki Kawamata, Koji Koyama
InstitutionsSaga University
Citations55

Diamond metal oxide semiconductor field effect transistors (MOSFETs) on high-quality heteroepitaxial diamond (Kenzan diamond <sup xmlns:mml=“http://www.w3.org/1998/Math/MathML” xmlns:xlink=“http://www.w3.org/1999/xlink”&gt;®&lt;/sup> ) with NO <sub xmlns:mml=“http://www.w3.org/1998/Math/MathML” xmlns:xlink=“http://www.w3.org/1999/xlink”&gt;2&lt;/sub> p-type doping and an Al <sub xmlns:mml=“http://www.w3.org/1998/Math/MathML” xmlns:xlink=“http://www.w3.org/1999/xlink”&gt;2&lt;/sub> O <sub xmlns:mml=“http://www.w3.org/1998/Math/MathML” xmlns:xlink=“http://www.w3.org/1999/xlink”&gt;3&lt;/sub> passivation overlayer exhibited a high off-state breakdown voltage of −2608 V. The 100-nm-thick Al <sub xmlns:mml=“http://www.w3.org/1998/Math/MathML” xmlns:xlink=“http://www.w3.org/1999/xlink”&gt;2&lt;/sub> O <sub xmlns:mml=“http://www.w3.org/1998/Math/MathML” xmlns:xlink=“http://www.w3.org/1999/xlink”&gt;3&lt;/sub> passivation overlayer on the hole channel increased the high-voltage-handling capability of the MOSFETs by substantially suppressing the off-state drain leakage currents. The MOSFET showed a specific on-resistance of 19.74 <inline-formula xmlns:mml=“http://www.w3.org/1998/Math/MathML” xmlns:xlink=“http://www.w3.org/1999/xlink”> <tex-math notation=“LaTeX”>$\text{m}\Omega \cdot $ </tex-math></inline-formula> cm <sup xmlns:mml=“http://www.w3.org/1998/Math/MathML” xmlns:xlink=“http://www.w3.org/1999/xlink”&gt;2&lt;/sup> and a maximum drain current density of −288 mA/mm, with an extremely low gate leakage current <inline-formula xmlns:mml=“http://www.w3.org/1998/Math/MathML” xmlns:xlink=“http://www.w3.org/1999/xlink”> <tex-math notation=“LaTeX”>$ &lt; 10^{-{6}}$ </tex-math></inline-formula> mA/mm. The Baliga’s Figure-Of-Merits was experimentally determined to be 344.6 MW/cm <sup xmlns:mml=“http://www.w3.org/1998/Math/MathML” xmlns:xlink=“http://www.w3.org/1999/xlink”&gt;2&lt;/sup> , and the maximum DC power density was observed to be 21.0 W/mm.