Skip to content

Simple way to fabricate orderly arranged nanostructure arrays on diamond utilizing metal dewetting effect

MetadataDetails
Publication Date2021-08-12
JournalOptics Express
AuthorsTianfei Zhu, Yan Liang, Zhangcheng Liu, Yanfeng Wang, Guoqing Shao
InstitutionsXi’an Jiaotong University
Citations3
AnalysisFull AI Review Included

Technical Documentation: Ordered Nanostructure Arrays on Diamond via Metal Dewetting

Section titled “Technical Documentation: Ordered Nanostructure Arrays on Diamond via Metal Dewetting”
  • Scalable Fabrication Method: Introduces a cost-effective technique using thermal annealing of patterned gold disks to form self-assembled gold nanospheres, eliminating the need for expensive Electron Beam Lithography (EBL) in creating diamond nanostructure arrays.
  • Target Application: Optimized for single photon source devices, specifically enhancing Nitrogen-Vacancy (NV) center emissions for quantum communication, quantum computation, and high-precision quantum sensing.
  • Morphology Control: Establishes a precise relationship between initial gold disk dimensions (diameter and thickness) and the resulting gold nanosphere mask size. A 1 µm diameter, 20 nm thick gold disk yields an approximately 334 nm gold sphere mask.
  • ICP Etch Tuning: Demonstrates that varying Inductively Coupled Plasma (ICP) platen power (25 W to 100 W) allows precise adjustment of diamond nanopillar cone angles (CAs), ranging from 27.2° to 50.3°.
  • Performance Enhancement: FDTD simulations reveal that the as-fabricated nanostructures boost photon collection efficiency to 53.56%, compared to just 19.10% for planar diamond surfaces.
  • Surface Energy Mechanics: Relies on the dewetting phenomenon where gold reorganizes into a spherical shape to minimize surface tension during thermal annealing.
ParameterValueUnitContext
Gold Disk Diameter (Initial)1 - 20µmPhotolithography pattern size prior to annealing
Gold Disk Thickness (Initial)20 - 100nmSputtered/evaporated gold film thickness
Gold Nanosphere Diameter (Final Mask)~310 to 334nmAchieved via thermal annealing dewetting
Optimal Disk-to-Sphere Ratio> 50 nm / 5 µmnm/µmMinimum ratio required for complete sphere formation
Diamond Nanopillar Height~600nmFixed height used in FDTD simulation
Nanopillar Cone Angles (CA)27.2, 44.6, 50.3°Achieved by varying ICP etch power
NV Center Position (Simulated)20nm below tipDepth placement of dipole source
ICP Platen Power Range25 - 100WPower variation for morphology tuning
Planar Collection Efficiency (Simulated)19.10%Baseline photon collection efficiency
Nanostructure Collection Efficiency (Simulated)53.56%Enhanced photon collection efficiency
NA 0.95 Collection Efficiency (Simulated)~48.63%Efficiency measured at NA 0.95
Nanopillar Etch RateIncreases with power-Higher power yields taller pillars
Power Deviation from Theoretical2.36 - 7.78%Experimental vs. calculated sphere size
  • Substrate Preparation: Begin with optical-grade diamond substrates suitable for hosting NV centers.
  • Photolithography Patterning: Apply photoresist and pattern gold disks with diameters ranging from 1 µm to 20 µm.
  • Gold Deposition: Deposit thin gold films with controlled thicknesses (20 nm to 100 nm) over the patterned photoresist.
  • Lift-off Process: Remove photoresist to leave isolated, orderly arranged gold disk arrays on the diamond surface.
  • Thermal Annealing (Dewetting): Heat the sample to induce surface tension-driven dewetting, causing gold disks to agglomerate into spherical nanoparticles. The volume conservation principle dictates that sphere diameter follows a power function relationship (power = 2/3) with disk diameter when thickness is fixed.
  • Nanomask Optimization: For NV center applications, use a 1 µm diameter, 20 nm thick gold disk to achieve an approximately 334 nm diameter gold sphere mask.
  • ICP Etching: Perform Inductively Coupled Plasma etching on samples with gold dot array masks. Adjust platen power between 25 W and 100 W to control diamond nanopillar cone angles and heights.
  • FDTD Simulation: Model the NV center as an s-polarized dipole positioned 20 nm below the nanopillar tip. Evaluate optical field distributions and collection efficiency at varying numerical apertures (NA).
  • Applicable Materials:

    • Optical Grade Single Crystal Diamond (SCD): Essential for replicating this research. 6CCVD provides high-purity SCD wafers and plates optimized for color center hosting (NV, SiV), with thicknesses ranging from 0.1 µm to 500 µm.
    • Custom Dopant Profiles: For experiments requiring NV-rich or SiV-specific regions, 6CCVD offers tailored material specifications to meet precise defect density requirements.
  • Customization Potential:

    • Precision Laser Cutting: The research relies on highly uniform diamond nanopillar arrays. 6CCVD’s laser cutting services can pre-shape diamond substrates into custom geometries, reducing etch time and improving yield.
    • Pre-Metalization Services: To accelerate your nanofabrication pipeline, 6CCVD provides in-house metalization (Au, Pt, Pd, Ti, W, Cu). Sputtering uniform gold films with thicknesses from 20 nm to 100 nm is fully supported.
    • Wafer-Scale Production: Moving beyond the single-sample regime of this research, 6CCVD manufactures PCD plates and wafers up to 125 mm, enabling scalable production of nanostructure arrays for commercial quantum devices.
  • Engineering Support:

    • Material Selection Consultation: 6CCVD’s in-house PhD engineering team specializes in diamond material science for quantum photonics and can assist in selecting the optimal SCD grade, crystal orientation, and surface preparation (Ra < 1nm polishing) for nanostructure fabrication.
    • Etch Mask Optimization: Given the critical relationship between gold disk dimensions and final nanosphere mask size, our team can advise on achieving the dewetting ratio required for complete sphere formation (> 50 nm / 5 µm).
    • Application-Specific Guidance: Whether your project targets quantum communication, biological detection, or quantum sensing (magnetometry, thermometry), 6CCVD can recommend the ideal diamond material specification.
  • Call to Action: For custom specifications or material consultation, visit 6ccvd.com or contact our engineering team directly.

View Original Abstract

We introduce a simple method with thermal annealing round gold disk for agglomeration to fabricate orderly arranged nanostructure arrays on diamond for single photon source applications. In the annealing process, the dependence of gold sphere size on disk thickness and diameter was investigated, showing that gold sphere diameter was decreased with decreasing gold disk thickness or diameter. The condition parameters of ICP etch were adjusted to obtain different nanostructure morphologies on diamond. The collection efficiency of nitrogen-vacancy (NV) center embedded in nanostructure as-fabricated could reach to 53.56% compared with that of 19.10% in planar case with the same simulation method.