Skip to content

Magnetic field and angle-dependent photoluminescence of a fiber-coupled nitrogen vacancy rich diamond

MetadataDetails
Publication Date2021-09-23
JournalJournal of Applied Physics
AuthorsRalf Wunderlich, Robert Staacke, Wolfgang Knolle, Bernd Abel, Jan Meijer
InstitutionsLeibniz Institute of Surface Engineering, Leipzig University
Citations18
AnalysisFull AI Review Included
  • Objective: Microwave-free magnetic field sensing via PL intensity of NV centers in single-crystal diamond.
  • Material Platform: High-density NV ensemble (nitrogen-vacancy rich) integrated into a fiber-coupled SCD waveguide.
  • Key Achievement: Identification of level anti-crossings, cross-relaxation, and auto-cross relaxation features via angle-resolved sweeps from 0 to 111 mT.
  • Methodology: Oscillating optical illumination combined with lock-in detection (no microwave drive required).
  • Performance Window: Operational range up to 111 mT with detected features at critical points (2.70, 4.05, 4.80, and 5.50 mT).
  • Optical Signature: Multi-level transitions mapped to ground state (ms = 0, ±1) and excited state (ms = 0, ±1) populations, including singlet state contributions.
  • Sensor Paradigm: Demonstrates feasibility of all-optical, multi-spin interaction studies as a cost-efficient alternative to conventional ODMR.
ParameterValueUnitContext
Magnetic field range0 - 111mTSweep range for PL angle-dependence measurements
Critical field features2.70, 4.05, 4.80, 5.50mTLevel anti-crossing / cross-relaxation dips
NV center densityHigh (ensemble)-Fiber-coupled single crystal for SNR ∝ √n
Coherence time (T2)FewmsRoom-temperature ensemble (per cited literature)
Spin states probedms = 0, ±1 (gs); ms = 0, ±1 (es); singlet-7-state model fit to PL curves
Laser power range0 - 25mWPower-dependent PL normalization
Detection schemeLock-in + oscillating illumination-Suppresses laser intensity noise
Crystal orientationMisalignment 0° - 8°°Angle-resolved Zeeman mapping
SubstrateFiber-coupled SCD-Single crystal with engineered NV-rich layer
  1. Sample Preparation: NV-rich single-crystal diamond mounted in a fiber-coupled geometry for optical excitation and collection.
  2. Optical Excitation: Oscillating laser delivered through fiber, with lock-in amplifier referenced to modulation frequency.
  3. Magnetic Field Application: Swept from 0 to 111 mT with angular alignment control (±8° misalignment mapping).
  4. PL Detection: Fluorescence monitored via photodetector; normalized PL plotted against magnetic field and laser power.
  5. Multi-Level Modeling: 7-state rate equation model (gs ms=0, ±1; es ms=0, ±1; singlet) fitted to experimental PL.
  6. Feature Identification: Dips and shoulders assigned to level anti-crossings, cross-relaxations, and auto-cross-relaxation between coupled NV centers.
  7. Spin Defect Correlation: Low-field dips cross-correlated with P1 centers and unidentified paramagnetic defects.
Research Requirement6CCVD Material
NV-rich SCD for fiber-coupled waveguideOptical Grade SCD (NV-doped ensemble) - custom NV/N2 concentration tuning via controlled nitrogen incorporation during MPCVD growth.
Single-crystal host with high T2High-Purity SCD substrates - low nitrogen background for extended coherence; available up to 10mm thickness.
Fiber-integrated geometryCustom laser-cut & polished SCD plates - sub-µm edge quality, Ra < 1nm surface finish for efficient evanescent / butt-coupling.
Paper Requirement6CCVD Capability
NV-rich bulk crystalCustom N2 doping profiles during MPCVD growth to engineer NV density (10⁰ - 10⁵ ppb range).
Fiber-coupling facetsLaser cutting & shaping to non-standard geometries; double-side polishing Ra < 1nm on SCD.
Spin-defect spectroscopy couplingOptional metalization (Ti/Pt/Au or Cr/Au) for hybrid photonic-plasmonic or microwave electrode integration without removing the optical path.
Multi-stack geometrySCD / PCD bonding capabilities for composite sensors or thermal management layers.

The research demonstrated here relies on precise control of NV center density, crystal orientation, and surface optical quality — all parameters that must be tightly specified at the material level. 6CCVD’s in-house PhD engineering team supports material selection, NV density optimization, and geometry design for quantum sensing, ODMR-free magnetometry, and fiber-integrated quantum photonics projects. Our team routinely collaborates on sample characterization, providing guidance on nitrogen incorporation strategies and crystal orientation tolerances (< 1° available) for angle-dependent Zeeman spectroscopy.

For custom specifications, NV-density consultation, or fiber-coupled diamond prototyping, visit 6ccvd.com or contact our engineering team directly. Global DDU/DDP shipping available.

View Original Abstract

Here, we investigate the magnetic field dependent photoluminescence (PL) of a fiber-coupled diamond single crystal with a high density of nitrogen vacancy (NV) centers. Angle-dependent magnetic field sweep measurements between 0 and 111 mT were performed using an oscillating illumination combined with lock-in techniques. Besides the expected superposed PL of differently oriented NV centers, a zoo of features in the PL are found. These features can be associated with level anti-crossings and cross relaxations. In particular, PL measurements allowed us to detect auto-cross relaxation between coupled NV centers. Moreover, the PL measurements at low magnetic fields show dips suggesting an interaction of NV centers with additional spin defects. The results presented here are not only a study for NV-based fiber-coupled sensors made of diamond, but also show a way to investigate with manageable effort and purely an optical multispin interaction with at least one NV center as a constituent.