Skip to content

Effective cooling of substrates with low thermal conductivity under conditions of gas-jet MPCVD diamond synthesis

MetadataDetails
Publication Date2021-12-01
JournalJournal of Physics Conference Series
AuthorsA. A. Emel’yanov, M. Yu. Plotnikov, Н. И. Тимошенко, I. B. Yudin
InstitutionsInstitute of Thermophysics
Citations3
AnalysisFull AI Review Included
  • Core Innovation: Development of a liquid metal (Rose alloy) thermal interface layer to drastically reduce thermal contact resistance between low-conductivity substrates and cooled holders during gas-jet MPCVD.
  • Primary Problem Solved: Silicon substrates (0.5 mm) experienced localized burnout and structural failure at hole centers due to thermal bowing and interfacial air gaps that spiked contact resistance ~20×.
  • Thermal Performance: A Rose alloy melt interlayer lowered the silicon substrate temperature by approximately 200-400 °C compared to dry Mo-on-Mo contact under identical plasma loading.
  • Process Conditions Validated: Hydrogen flow rates of 3000-10000 sccm and microwave powers up to 3 kW at a chamber pressure of 40 torr (≈5.3 kPa).
  • Deposition Capability: Confirmed successful diamond film synthesis on Mo substrates at 78 µm/h via gas-jet MPCVD without substrate destruction.
  • Methodology: Comparative temperature mapping of Mo and Si substrates across six discrete hydrogen flow setpoints using a redesigned, liquid-metal-backed substrate holder.
  • Key Takeaway: Liquid metal interfaces are essential for extending MPCVD diamond deposition to thermally fragile, low-k substrates like Si, SiC, sapphire, and ZnS without compromising film quality or substrate integrity.
ParameterValueUnitContext
Microwave Powerup to 3kWDischarge activation in gas-jet MPCVD reactor
Hydrogen Flow Rate3000 - 10000sccmCarrier gas for precursor chemistry
Chamber Pressure40torr≈ 5.3 kPa deposition environment
Plasma Jet Diameter≈ 10mmActivated gas jet cross-section
Heat Flux to Substrate500 - 1500WThermal load at deposition zone
Molybdenum Substrate Thickness0.4mmStandard Mo substrate
Silicon Substrate Thickness0.5mmLow-k target substrate
Diamond Deposition Rate78µm/hAchieved gas-jet synthesis rate
Tbase (Mo) at 10000 sccm700°CCooled holder base temperature
T (Mo substrate) at 10000 sccm1200°CMo on Mo contact (dry)
T (Si substrate) at 10000 sccm1000°CSi on Rose alloy (with melt)
T (Si substrate) at 8000 sccm1200°CSi on Mo (dry contact)
Contact Area Loss (rough surfaces)≈ 95%Effective contact area reduction
Thermal Resistance Multiplier≈ 20×Increase due to poor contact
Rose Alloy Melt Temperature≈ 100°CEutectic melting point (Bi-Pb-Sn)
  • Reactor Configuration: Gas-jet MPCVD reactor with supersonic plasma expansion delivering activated species directly to the substrate surface.
  • Operating Window: H2 flow ramped in six discrete steps (3000, 4000, 5000, 6000, 8000, 10000 sccm); microwave power fixed at ≤ 3 kW.
  • Substrate Loading: 0.4 mm Mo and 0.5 mm Si substrates clamped against a water-cooled copper block (block 5, cooling system 7 in Fig. 1).
  • Initial Configuration (Holder 1): Dry mechanical contact between substrate and Mo holder — produced uncontrolled substrate temperatures and burnout in Si.
  • Redesigned Holder (Holder 2): Liquid Rose alloy melt introduced at the substrate/holder interface to eliminate geometric air gaps and phonon-scattering interfaces.
  • Diagnostics: Multi-point thermocouple measurement of base temperature (Tbase) and substrate surface temperature across all flow rates.
  • Failure Analysis: Identified thermal bowing from radial gas-jet heating as the root cause of Si center-hole burnout (1-2 mm diameter).
  • Validation Step: Confirmed diamond film synthesis on both Mo and Si substrates using the liquid-metal-backed holder without substrate failure.
6CCVD ProductRelevance to This Paper
Optical Grade SCD (Single Crystal Diamond)Replicates high-purity films for thermal management and IR window applications
Free-Standing PCD (Polycrystalline Diamond)Suitable for electronic heat spreaders where the paper’s diamond-on-substrate route targets integration
Heavy Boron-Doped PCD (BDD)Extends the Si/SiC-compatible deposition concept to conductive electrodes for electrochemistry
SCD Wafers (0.1 µm - 500 µm)Custom thicknesses match the thin-film regime explored by the authors’ 78 µm/h deposition rate
  • Substrate Format: The paper required 0.4-0.5 mm Mo/Si substrates. 6CCVD can deliver custom SCD, PCD, and doped diamond plates up to 125 mm in PCD diameter, with SCD/PCD thickness control from 0.1 µm to 500 µm.
  • Metalization: For replication of the Mo and Si substrate interfaces in next-stage device integration, 6CCVD provides in-house metalization with Au, Pt, Pd, Ti, W, and Cu — covering both the adhesion layers (Ti) and inert barriers (Pt/Au) required for thermal test vehicles.
  • Laser Cutting & Dicing: 6CCVD offers custom laser cutting and dicing services to deliver non-standard substrate geometries used in thermal bowing diagnostics.
  • In-House PhD Team: 6CCVD’s materials scientists can assist with selecting the correct diamond grade (SCD vs. PCD vs. BDD) for thermal management, IR optics, and heat-spreader device architectures — the exact application families the paper enables through its liquid-metal cooling innovation.
  • Process Consultation: If you are scaling gas-jet MPCVD onto thermally fragile substrates (Si, SiC, sapphire, ZnS, ZrO2), our team can advise on thermal interface engineering, holder design, and pre-bonded metalization strategies.
  • Reproducibility & Scale-Up: For customers transitioning from laboratory 10 mm jet footprints to production-scale reactors, 6CCVD can supply uniform, large-area PCD reference wafers for benchmarking.

For custom specifications or material consultation, visit 6ccvd.com or contact our engineering team directly.

View Original Abstract

Abstract The paper presents the results of an experimental study of heating molybdenum and silicon substrates under the conditions of gas-jet deposition of diamond structures using the precursor gases of a microwave discharge to activate. A cooled substrate holder using a metal melt to improve heat removal by reducing the thermal resistance between the substrate and the substrate holder has been developed. The use of the melt allowed lowering the temperature of the silicon substrate under the conditions of gas-jet deposition to a level that ensures the preservation of its structure. The developed substrate holders were used to carry out gas-jet synthesis of diamond structures on molybdenum and silicon substrates.