Skip to content

Manipulation of the In Situ Nitrogen‐Vacancy Doping Efficiency in CVD‐Grown Diamond

MetadataDetails
Publication Date2022-03-08
Journalphysica status solidi (a)
AuthorsJulia Langer, V. Cimalla, V. Lebedev, Lutz Kirste, Mario Prescher
InstitutionsFraunhofer Institute for Applied Solid State Physics
Citations5
AnalysisFull AI Review Included
  • Core Innovation: The paper investigates the in situ generation of nitrogen-vacancy (NV) centers in chemical vapor deposition (CVD) diamond, focusing on how electric-field strength at the substrate position dictates defect incorporation.
  • Methodology: Researchers manipulated resonance conditions within an MW-PE-CVD reactor cavity by adjusting the substrate-holder diameter (ranging from 16 mm to 30 mm) while keeping other input variables constant.
  • Critical Finding: A reduction in electric-field strength (down to ~100 kV/m) prevented the formation of polycrystalline rims and twinning-induced grain boundaries, resulting in thick, high-quality homo-epitaxial diamond with significantly reduced internal stress.
  • Efficiency Breakthrough: By tuning the electric-field strength, the team achieved an in situ NV incorporation efficiency (relative to neutral substitutional nitrogen, Ns0) of nearly 3%, drastically higher than typical literature values.
  • Defect Density Control: Total NV concentrations reached 0.9 ppm to 2.5 ppm, with total nitrogen doping ranging between 18 ppm and 224 ppm, offering precise control over the spin bath.
  • Plasma Diagnostics: Optical-emission spectroscopy (OES) was used to monitor CN and CH radical concentrations and gas temperatures (ranging from ~830°C to ~990°C), directly correlating plasma chemistry with crystalline quality.
  • Application Impact: This enhanced control allows for the synthesis of quantum-grade diamond without expensive post-treatment processes (like electron or neutron irradiation), streamlining the path to masers, hyperpolarization devices, and magnetometers.
ParameterValueUnitContext
Reactor TypeMW-PE-CVD-Microwave Plasma Enhanced CVD
Substrate Holder Diameters16, 21, 25, 30mmVariable to alter E-field strength
Electric-Field Strength (Max)396kV/mHighest simulated strength (16 mm holder)
Electric-Field Strength (Min)100kV/mLowest simulated strength (30 mm holder)
Substrate Temperature~830 to ~990°CExtracted from gas temperature via OES
Nitrogen Concentration Range18 to 224ppmSingle-substitutional & total N
Total NV Concentration Range0.9 to 2.5ppmQuantified via PL spectroscopy
Maximum NV/Ns0 Efficiency~3%Ratio of NV to neutral substitutional N
Crystal Quality (FWHM)Down to ~10arcsecHigh-resolution X-ray diffraction
Internal Stress DistributionHomogeneous-Reduced at lower E-field strengths
OES Monitoring Range380.0 to 395.0nmWavelength for CN/CH analysis
Growth ModeHomo-epitaxial-Single Crystal Diamond (SCD) synthesis
  • Reactor Modification: Adjusted removable substrate holders (16 mm-30 mm diameter) to alter the resonance conditions and electric-field strength distribution within the reactor cavity.
  • Finite Element Simulation: Used COMSOL software to map the electric-field strength distribution, ensuring symmetric dispersion and calculating peak field intensities on top of the substrate holder.
  • Optical-Emission Spectroscopy (OES): Continuously monitored plasma conditions during growth, specifically tracking the ratio of CN radicals to CH radicals and calculating gas temperature via Boltzmann plots of rotational CH transitions.
  • Variable Tuning: Maintained constant microwave input power, gas flow, and pressure; isolated the electric-field strength as the sole independent variable to observe its effect on defect incorporation.
  • Plasma Optimization: Identified a “sweet spot” where etching no longer dominated growth (preventing negative growth rates) and plasma ignition fully covered the substrate.
  • Defect Characterization: Quantified NV- and Ns0 centers via Photoluminescence (PL) and UV-Vis spectroscopy, correlating defect density directly with the simulated electric-field strength.
  • Structural Analysis: Utilized High-Resolution X-Ray Diffraction (HRXRD) to measure crystal quality (FWHM) and map internal stress distribution via curvature measurements.

Connecting the rigorous plasma and E-field tuning demonstrated in this paper to commercial diamond production requires highly controlled, flexible manufacturing. 6CCVD provides the exact material specifications and engineering support to replicate or extend this research.

  • Optical Grade Single Crystal Diamond (SCD): To replicate the thick, high-quality homo-epitaxial layers described in the paper, 6CCVD offers custom-grown SCD. Our capabilities include thicknesses ranging from 0.1 µm to 500 µm, perfect for integrating high-density NV ensembles without the polycrystalline rim formation seen at excessive E-field strengths.
  • Custom Nitrogen Doping Profiles: For quantum sensing and maser applications requiring specific spin bath environments, 6CCVD can engineer precise nitrogen doping levels during the MPCVD process to achieve your target Ns0 and NV concentrations.
  • Polycrystalline Diamond (PCD) & Substrates: If the research shifts toward cost-effective ensemble sensors or heat spreaders, our PCD plates/wafers up to 125 mm and substrates up to 10 mm thick provide a robust alternative.
  • Precision Laser Cutting: The paper utilizes substrate holders from 16 mm to 30 mm. 6CCVD offers laser cutting services to shape SCD or PCD into exact geometries required for your specific resonator cavity or sample holder.
  • In-House Metallization: To transition from raw nitrogen-doped diamond to functional quantum devices, our internal metallization capabilities (Au, Pt, Pd, Ti, W, Cu) are critical. We can deposit customized multilayer contacts (such as Ti/Pt/Au) to interface with microwave striplines, coplanar waveguides, or NV-readout electronics.
  • Ultra-Low Surface Roughness: Maintaining the internal stress homogeneity and optical clarity of these NV centers requires pristine surfaces. 6CCVD provides Ra < 1 nm polishing for SCD and < 5 nm for inch-size PCD, ensuring low optical scattering for magnetometry and PL readout.
  • PhD-Led Material Consultation: Tuning the E-field strength to optimize NV/Ns0 efficiency (up to 3% as shown in the paper) is a complex balancing act of pressure, temperature, and microwave power. 6CCVD’s in-house PhD engineering team can assist in material selection, predicting optimal doping levels, and advising on the best crystal orientation ([100] vs. [111]) for your specific application.
  • Scalable Production: Whether you require a few research-grade samples or scaled-up batches for sensor arrays, our MPCVD reactors are optimized for defect control and high yield.

Transitioning from fundamental plasma physics to a deployable quantum device requires a materials partner who understands NV-center physics at the atomic level.

For custom specifications, metallization, or material consultation regarding your NV-diamond or quantum sensing project, visit 6ccvd.com or contact our engineering team directly.

View Original Abstract

Herein, the in situ generation of nitrogen‐vacancy (NV) centers in diamond during chemical vapor deposition (CVD) is investigated depending on the electric‐field strength at the sample position. The alteration of the electric‐field strength is induced by changing the resonance conditions within the resonator cavity while keeping the growth input variables constant. The electric‐field strength distribution is obtained by simulation results. During the growth experiments, optical‐emission spectroscopy data is collected, which shows the impact of the electric‐field strength on the radical concentrations within the plasma and the gas temperature. Through the reduction of the electric‐field strength, the synthesis of thick, high‐quality, nitrogen‐doped diamond without the formation of a polycrystalline rim around the sample edges and the twinning‐induced growth of polycrystalline grains was accomplished. Therefore, a reduced internal and more homogeneous stress distribution is achieved. Furthermore, significant influences on the in situ NV doping are discovered. In addition to a considerable gain of the in situ NV generation, also a major enhancement of the in situ incorporation efficiency of NV centers in comparison to centers up to almost 3% is observed. Depending on the application, this makes posttreatment processes for additional NV generation dispensable.