Skip to content

Investigation of boron-doped delta layers in CVD diamond grown on single-sector HPHT substrates

MetadataDetails
Publication Date2022-10-31
JournalNanosystems Physics Chemistry Mathematics
AuthorsM.A. Lobaev, A.L. Vikharev, A.M. Gorbachev, D.B. Radishev, E.A. Arkhipova
InstitutionsInstitute of Applied Physics, N. I. Lobachevsky State University of Nizhny Novgorod
Citations1
AnalysisFull AI Review Included
  • The provided document is not a scientific research paper. It is a legal terms-of-use statement governing access and usage of information published on websites within the ifmo.ru domain (ITMO University, Saint Petersburg, Russian Federation).
  • The document outlines copyright restrictions, attribution requirements, reproduction limits (e.g., 30% for citation, 40% for educational use, 300 characters for online dissemination), and liability disclaimers.
  • No technical data, materials science content, diamond growth parameters, or experimental results are present in the source text.
  • No MPCVD (Microwave Plasma Chemical Vapor Deposition) process specifications — such as substrate temperature, chamber pressure, methane concentration, or microwave power — can be extracted.
  • No diamond material properties — such as Raman peak positions, coherence times, carrier mobilities, nitrogen-vacancy (NV) center densities, or boron doping levels — can be extracted.
  • Because the input lacks any scientific content, the Technical Specifications, Key Methodologies, and 6CCVD Solutions sections cannot be populated with data-derived facts. This response is generated to maintain structural integrity and provide a clear explanation of the mismatch.

  • No technical parameters are available in the provided source document. The following table reflects the absence of extractable scientific data:
ParameterValueUnitContext
N/AN/AN/ASource contains legal/copyright text only; no experimental or material data is present

  • No experimental methodology is described in the provided source document. The content exclusively covers:
    • Terms of access and usage for ifmo.ru domain content
    • Reproduction and citation limits
    • Attribution and linking requirements
    • Liability disclaimers under Russian Federation law

  • Applicable Materials: Not determinable from the provided document. Should a genuine MPCVD diamond research paper be supplied, 6CCVD’s product line — including Optical Grade SCD, Electronic Grade SCD, Heavy Boron-Doped PCD (BDD), and Freestanding Polycrystalline Diamond (PCD) wafers — would be evaluated against the paper’s substrate and doping requirements.
  • Customization Potential: 6CCVD offers custom metalization (Au, Pt, Pd, Ti, W, Cu), laser cutting and dicing, and dimensional customization up to 125 mm for PCD plates. These capabilities are relevant to translating published diamond device architectures into fabricated prototypes.
  • Engineering Support: 6CCVD’s in-house PhD-level engineering team is available to consult on material selection, growth orientation (e.g., (100), (110), (111)), and post-processing (polishing to Ra < 1 nm for SCD and Ra < 5 nm for inch-size PCD) for ongoing research projects.
  • Call to Action: For custom specifications or material consultation, visit 6ccvd.com or contact our engineering team directly.
View Original Abstract

This work is devoted to experimental study of boron doped delta layers in CVD diamond.Delta layers with a thickness of 0.8 -2 nm were grown with a concentration of boron atoms of (1 -1.7)•10 21 cm -3 , and localized inside undoped defect-free diamond.The layers thickness and boron concentration were measured by secondary ion mass spectrometry (SIMS).The surface density and the Hall mobility of holes, the layer resistance at room temperature, and temperature dependences of these parameters are presented.Performed electrical measurements showed that, despite the perfect (from the point of view of the possibility of quantum effects) profile of delta layers, no significant increase was observed in the hole mobility compared to uniform doping with the same concentration of boron atoms.An explanation is proposed for the results of electrical measurements based on calculations of the delta layer profile and the concentration of delocalized holes depending on the layer thickness.It is discussed which parameters of the boron doped delta layers are needed in order to obtain a significant increase of the hole mobility in heavily doped diamond.