Lightweight diamond/Cu interface tuning for outstanding heat conduction
At a Glance
Section titled “At a Glance”| Metadata | Details |
|---|---|
| Publication Date | 2023-03-24 |
| Journal | Carbon Energy |
| Authors | Wenjie Dou, Congxu Zhu, Xiwang Wu, Xun Yang, Wenjun Fa |
| Institutions | Zhengzhou University, Northeast Normal University |
| Citations | 27 |
| Analysis | Full AI Review Included |
Executive Summary
Section titled “Executive Summary”- Objective: Address thermal bottlenecking in next-generation very-large-scale integrated (VLSI) circuit packaging via engineered diamond/Cu composites.
- Core Innovation: Fabrication of a gradient W-WC-W2C carbide layer on diamond particle surfaces using magnetron sputtering followed by precise thermal processing.
- Key Achievement: Delivered a lightweight composite (density < 4 g cm-3) achieving a peak thermal conductivity of 655 W m-1 K-1, representing a 55% improvement over uncoated baselines.
- Mechanism: Coherent interface architecture acts as an electron-phonon coupling bridge, resolving the fundamental carrier mismatch between diamond (phonon-dominated) and Cu (electron-dominated).
- Processing Window: Optimized heat-treatment temperature range of 950-1050 °C, with 950 °C identified as the optimal balance point for carbide phase formation.
- Industrial Relevance: Establishes a scalable, dual-stage (sputtering + HPHT sintering) pathway for high-volume manufacturing of thermal management materials.
- Benchmark Performance: Thermal diffusivity reached 331 mm2 s-1 with a coefficient of thermal expansion (CTE) of only 1.76 × 10-6 K-1.
Technical Specifications
Section titled “Technical Specifications”| Parameter | Value | Unit | Context |
|---|---|---|---|
| Diamond Content (Composite) | 90 | vol% | High-loading densified composite |
| Peak Thermal Conductivity (TC) | 655 | W m-1 K-1 | Optimized W-WC-W2C@diamond/Cu composite |
| Thermal Diffusivity | 331 | mm2 s-1 | Measured via laser flash method |
| Coefficient of Thermal Expansion (CTE) | 1.76 × 10-6 | K-1 | Close-matched to semiconductor dies |
| Composite Density | < 4 | g cm-3 | Lightweight thermal management |
| Relative Density (950 °C) | 98.8 | % | Near-theoretical densification |
| Relative Density (1150 °C) | 99.1 | % | Peak densification observed |
| Thermal Conductivity Improvement | +55 | % | Versus uncoated diamond/Cu reference |
| Specific TC (TCD) | 172.8 | W m-1 K-1 g-1 cm3 | Lightweight performance figure of merit |
| Sputtering W Coating Thickness | ~100 | nm | Baseline metallization layer |
| Optimal Heat-Treatment Temp | 950 | °C | Best balance of W/WC/W2C phases |
| WC Phase Content (950 °C) | 43.44 | % | Dominant carbide species |
| W2C Phase Content (950 °C) | 10.4 | % | Minor carbide species |
| Uncoated Diamond Wetting Angle | 131.5 | ° | Contact angle with liquid Cu at 1200 °C |
| Diamond Surface Roughness (Pre-HT) | 15.5 | nm RMS | Before thermal processing |
| Diamond Surface Roughness (Post-HT) | 66.5 | nm RMS | After gradient layer formation |
| Graphitization Onset (Coated) | 1050 | °C | Delayed vs. uncoated diamond |
| Gibbs Free Energy (W + C → W2C) | −11.6 | kJ mol-1 | Thermodynamic favorability |
| Gibbs Free Energy (W2C → WC) | −47.4 | kJ mol-1 | Secondary carbide reaction |
| Interface Lattice Spacing | 0.206 | nm | W2C(110) coherent plane |
Key Methodologies
Section titled “Key Methodologies”- Diamond Pretreatment: Mechanically crushed diamond particles cleaned to expose high-surface-area unstable crystal planes for enhanced coating reactivity.
- Magnetron Sputtering Deposition: Tungsten (W) layer deposited at ~100 nm thickness using comprehensive magnetron sputtering to ensure uniform, conformal coverage.
- Thermal Gradient Formation: Heat treatment across 750-1050 °C window to drive in-situ solid-state reactions forming W-WC-W2C gradient architecture.
- Raman Spectroscopy Verification: Confirmed graphitization suppression up to 1050 °C in coated samples (uncoated graphitizes at lower temperatures).
- XRD Phase Identification: Identified phase transitions from metallic W to mixed W/WC/W2C system post-heat treatment.
- XPS Chemical State Analysis: Quantified W 4f, W2C, and WC binding energies at 31.3, 34, 35.1, and 37.0 eV across multiple temperature points.
- Powder Mixing: Coated diamond particles homogeneously combined with irregular Cu matrix powder.
- HPHT Sintering: High-temperature, high-pressure consolidation at 950-1350 °C to produce near-fully-dense composites (>98% relative density).
- Characterization Suite: SEM (FEI Nova 450), XRD (D/MAX2200PC), AFM (HORIBA LabRAM HR Evolution), and STEM (JEOL ARM200) with FIB lamella preparation.
6CCVD Solutions & Capabilities
Section titled “6CCVD Solutions & Capabilities”- Applicable Materials: This research requires high-purity, thermally robust Polycrystalline Diamond (PCD) particles capable of withstanding the 950-1050 °C heat-treatment regime without graphitization degradation. For the matrix side and for follow-up single-diamond heat spreader work, 6CCVD’s Optical Grade SCD and Thermal Grade PCD plates (up to 125 mm diameter, thicknesses from 0.1 µm to 500 µm) are ideally suited.
- Diamond Substrate Options: Beyond particulate reinforcement, 6CCVD supplies freestanding diamond substrates up to 10 mm thick for direct heat-spreader integration in GaN-on-diamond and SiC power module architectures.
- Customization Potential: The W-WC-W2C gradient architecture demonstrated here aligns with 6CCVD’s in-house metallization capabilities (Ti, W, Cr, Pt, Au). We offer custom sputter-coated refractory metal layers (including W, W/Cr multilayers, and TiC-forming systems) on both PCD particles and finished PCD/SCD wafers, eliminating supply-chain bottlenecks for interface-engineered composites.
- Precision Shaping: 6CCVD provides laser cutting and dicing services for diamond composites, enabling complex heat-spreader geometries required in advanced 2.5D/3D packaging stacks.
- Engineering Support: 6CCVD’s in-house PhD engineering team specializes in interface science for diamond/metal systems. We can assist with material selection, metallization stack design, and thermal characterization protocols for thermal management applications including GaN RF amplifiers, SiC power modules, and high-density VLSI interposers.
- Scalability Advantage: Unlike lab-scale sol-gel or salt-bath routes, our magnetron-sputtering-ready PCD particles and metallized wafers are produced with batch consistency suitable for industrial-volume composite manufacturing.
- Global Logistics: Rapid worldwide shipping (DDU default; DDP available) ensures research teams and production lines receive materials on accelerated timelines.
For custom specifications or material consultation, visit 6ccvd.com or contact our engineering team directly.
View Original Abstract
Abstract With rapid developments in the field of very large‐scale integrated circuits, heat dissipation has emerged as a significant factor that restricts the high‐density integration of chips. Due to their high thermal conductivity and low thermal expansion coefficient, diamond/Cu composites have attracted considerable attention as a promising thermal management material. In this study, a surface tungsten carbide gradient layer coating of diamond particles has been realized using comprehensive magnetron sputtering technology and a heat treatment process. Diamond/Cu composites were prepared using high‐temperature and high‐pressure technology. The results show that, by adjusting the heat treatment process, tungsten carbide and di‐tungsten carbide are generated by an in situ reaction at the tungsten-diamond interface, and W-WC-W 2 C gradient layer‐coated diamond particles were obtained. The diamond/Cu composites were sintered by high‐temperature and high‐pressure technology, and the density of surface‐modified diamond/Cu composites was less than 4 g cm −3 . The W-WC-W 2 C@diamond/Cu composites have a thermal diffusivity as high as 331 mm 2 s −1 , and their thermal expansion coefficient is as low as 1.76 × 10 −6 K −1 . The interface coherent structure of the gradient layer‐coated diamond/copper composite can effectively improve the interface heat transport efficiency.