Skip to content

Microwave-Based Quantum Control and Coherence Protection of Tin-Vacancy Spin Qubits in a Strain-Tuned Diamond-Membrane Heterostructure

MetadataDetails
Publication Date2023-11-29
JournalPhysical Review X
AuthorsXinghan Guo, Alexander M. Stramma, Zixi Li, William G. Roth, Benchen Huang
InstitutionsArgonne National Laboratory, Delft University of Technology
Citations37
AnalysisFull AI Review Included

Technical Documentation: Strain-Tuned SnV Diamond Membrane Heterostructure for Quantum Networking

Section titled “Technical Documentation: Strain-Tuned SnV Diamond Membrane Heterostructure for Quantum Networking”
  • Platform: Tin-Vacancy (SnV) color centers in uniformly strained (12C) diamond membranes heterogeneously bonded to fused silica substrates.
  • Strain Generation Method: Passive strain of 0.05%-0.1% achieved via thermal expansion mismatch between diamond and glass, bonded using HSQ and annealed at 600°C.
  • Microwave Control: 99.36(9)% Rabi π-gate fidelity at 4.50(2) MHz; randomized benchmarking Clifford gate fidelity of 97.7(1)% at 1.7 K and 95.7(3)% at 4 K.
  • Coherence Performance: T2,echo of 100(1) µs and CPMG-128 T2 of 1.57(8) ms at 1.7 K; T2,2XY8 reaches 223(10) µs at 4 K (record for group IV qubits at this temperature).
  • Optical Properties: ZPL linewidth of 47.4(16) MHz (near lifetime-limited 32.26(19) MHz); cyclicity η ≈ 2500; spin initialization fidelity of 98.8%.
  • Key Achievement: First demonstration of efficient MW-driven SnV spin control with coherence protection enabling operation at 4 K rather than requiring mK dilution refrigerators.
  • Application: Spin-photon interface for quantum networking nodes compatible with portable, cost-effective cryogenic systems.
ParameterValueUnitContext
Diamond Membrane Thickness150nmNominal thickness via smart-cut + overgrowth
Carbon Isotope Purification12C-Isotopically enriched overgrowth
Fused Silica Substrate Thickness500µmThermal expansion mismatch layer
HSQ Bonding Layer600°CAnneal temperature for solidification
Generated Strain Range0.05 - 0.1%Passive tensile strain via thermal contraction
Average Strain Magnitude0.075%Corresponding to orbital splitting of ~1500 GHz
Orbital Splitting (Strained)≈1300 (avg 1500)GHzRange 1200-1800 GHz across devices
Orbital Splitting (Unstrained)≈850GHzBulk diamond reference
Optical ZPL Linewidth47.4(16)MHz20 s average scan at 1.7 K
Lifetime-Limited Linewidth32.26(19)MHzCalculated from optical lifetime
Optical Lifetime4.933(190)nsExcited state lifetime
Long-term Frequency Stability σc23.8(1)MHzCenter frequency std. dev.
Splitting Stability σs13.28(6)MHzA1-B2 splitting std. dev.
Cyclicity (η)≈2500-B-field aligned to quantization axis
Spin Initialization Fidelity98.8%200 µs initialization pulse
Initialization Time Constant24.2(3)µsExponential decay constant
Rabi Frequency (Ω/2π)4.50(2)MHzAt 24 dBm MW input power
Rabi π-Gate Fidelity99.36(9)%High-fidelity single-pulse control
Clifford Gate Fidelity (1.7 K)97.7(1)%Randomized benchmarking at 2.8 MHz
Clifford Gate Fidelity (4 K)95.7(3)%Randomized benchmarking at 4 K
T2* (Ramsey)2.5(1)µsAt 1.7 K, Gaussian dephasing
T2,echo (CPMG-1)100(1)µsAt 1.7 K
T2,CPMG1281.57(8)msDynamical decoupling at 1.7 K
T2,echo (4 K)74(2)µsElevated temperature performance
T2,2XY8 (4 K)223(10)µsDepolarization-limited at 4 K
External Magnetic Field81.5mTODMR measurement field
ODMR Linewidth891-1047kHzTwo overlapping Lorentzian peaks
MW Waveguide Taper Width6µmEnhanced MW amplitude at target
SnV-to-Waveguide Distance4µmEfficient MW field exposure
Effective Landé g-factor1.62-Transverse MW with aligned B-field
MW Input Power24 (≈250)dBm (mW)Comparable to strained SiV demonstrations
Operating Temperature Range1.7 - 7KPreserved optical coherence to 7 K
Maximum ZPL Linewidth (7 K)52.0(8)MHzTemperature-dependent measurement
  1. Diamond Membrane Fabrication: Smart-cut method combined with isotopically purified 12C overgrowth produces 150 nm-thick membranes with pristine crystal quality and atomically smooth surfaces.
  2. Heterostructure Bonding: Membranes bonded to 500 µm-thick fused silica substrates (thermal expansion coefficient < 1 × 10−6 K−1) using hydrogen silsesquioxane (HSQ) as bonding agent.
  3. Strain Generation Protocol: Anneal bonded heterostructure at 600°C (above HSQ solidification temperature) to establish zero-strain reference; cool to cryogenic temperatures to generate uniform tensile strain of 0.05%-0.1%.
  4. Trench Patterning: 5 µm-deep trench etched on fused silica prior to bonding to suspend the membrane region and mitigate background fluorescence from HSQ resist.
  5. MW Waveguide Integration: Gold coplanar waveguides patterned and deposited post-bonding, tapered to 6 µm width near the measurement area to enhance microwave amplitude.
  6. Optical Characterization: Photoluminescence (PL) spectroscopy at 1.7 K to verify strain-induced orbital splitting; polarization measurements and 3D field scan to align external B-field with SnV quantization axis.
  7. MW Control Protocol: Pulsed ODMR frequency scans at 1.7 K; Rabi oscillation measurements at varying MW power; randomized benchmarking using Clifford gate set {I, πx, πy, ±πx/2, ±πy/2}.
  8. Dynamical Decoupling: CPMG and XY-8 pulse sequences for T2 extension; spin initialization via 200 µs optical pump pulse.
  9. Temperature-Dependent Studies: Coherence and optical linewidth measurements from 1.7 K to 7 K to verify performance retention at elevated temperatures.

The research platform requires ultra-thin, high-purity single-crystal diamond membranes with isotopically controlled carbon composition. The following 6CCVD offerings directly address these requirements:

6CCVD MaterialApplication Fit
Optical Grade SCD (Thin Film)Direct match for 150 nm membrane fabrication; thicknesses from 0.1 µm to 500 µm available
Isotopically Enriched 12C SCDCritical for extending T2* by eliminating 13C nuclear spin bath; 6CCVD can discuss custom enrichment options
High-Purity SCD SubstratesFor smart-cut donor substrates and overgrowth seed layers

The paper demonstrates several device-integration features that align with 6CCVD’s manufacturing capabilities:

  • Custom Thickness Control: Membrane thinning down to sub-µm regimes (0.1 µm-500 µm range) is available for quantum membrane and bulk device geometries.
  • Metalization Services: The gold coplanar waveguides tapered to 6 µm in the paper can be replicated or extended using 6CCVD’s internal metalization capabilities. Available metals include:
    • Au — Standard for MW waveguides (as used in this work)
    • Ti — Adhesion layer for robust thin-film bonding
    • Pt / Pd — For superconducting or specialized electrode integration
    • W — Refractory option for high-temperature processing steps
  • Laser Cutting & Dicing: Custom membrane dimensions and chip-level singulation can be achieved to match fused silica substrate layouts and trench geometries.
  • Surface Polishing: Atomically smooth surfaces (Ra < 1 nm for SCD) are prerequisites for the membrane bonding process described; 6CCVD’s polishing capability meets this requirement.

This paper highlights several engineering challenges where 6CCVD’s in-house PhD team can provide material consultation:

  • Strain Engineering: Selecting membrane thickness, crystal orientation, and overgrowth parameters to optimize strain transfer in heterostructure stacks.
  • Isotopic Purity: Advising on 12C enrichment levels required for target coherence times (the paper’s 2.5 µs T2* is partially limited by residual 13C).
  • MW Driving Optimization: Material selection (e.g., lower strain susceptibility grades) to complement waveguide geometry for efficient spin driving.
  • Cryogenic Compatibility: Material consultation for 4 K operation, ensuring thermal expansion mismatch is appropriate for target substrate pairings.
  • Scale-Up Pathways: Discussion of large-area membrane fabrication (6CCVD supports wafers/plates up to 125 mm for PCD) for future quantum-node arrays.

For teams replicating or extending this strain-tuned SnV platform:

  • Request ultra-thin SCD membranes (100-200 nm) with optional isotopic enrichment consultation.
  • Specify custom metalization patterns (Au/Ti stacks) for coplanar waveguide integration.
  • Inquire about laser-cut geometries matching your fused silica or alternative substrate layouts.
  • Consult 6CCVD engineers on strain-optimized overgrowth parameters for your target device architecture.

For custom specifications or material consultation, visit 6ccvd.com or contact our engineering team directly.

View Original Abstract

<p>Robust spin-photon interfaces in solids are essential components in quantum networking and sensing technologies. Ideally, these interfaces combine a long-lived spin memory, coherent optical transitions, fast and high-fidelity spin manipulation, and straightforward device integration and scaling. The tin-vacancy center (SnV) in diamond is a promising spin-photon interface with desirable optical and spin properties at 1.7 K. However, the SnV spin lacks efficient microwave control, and its spin coherence degrades with higher temperature. In this work, we introduce a new platform that overcomes these challenges - SnV centers in uniformly strained thin diamond membranes. The controlled generation of crystal strain introduces orbital mixing that allows microwave control of the spin state with 99.36(9)% gate fidelity and spin coherence protection beyond a millisecond. Moreover, the presence of crystal strain suppresses temperature-dependent dephasing processes, leading to a considerable improvement of the coherence time up to 223(10) μs at 4 K, a widely accessible temperature in common cryogenic systems. Critically, the coherence of optical transitions is unaffected by the elevated temperature, exhibiting nearly lifetime-limited optical linewidths. Combined with the compatibility of diamond membranes with device integration, the demonstrated platform is an ideal spin-photon interface for future quantum technologies.</p>