Design, Validation, and Fabrication of a Tailored Electrochemical Reactor Using 3D Printing for Studies of Commercial Boron-Doped Diamond Electrodes
At a Glance
Section titled āAt a Glanceā| Metadata | Details |
|---|---|
| Publication Date | 2024-03-25 |
| Journal | Industrial & Engineering Chemistry Research |
| Authors | LaĆs Gimenes Vernasqui, Miguel Montiel, N.G. Ferreira, Pablo CaƱizares, Manuel A. Rodrigo |
| Institutions | National Institute for Space Research, University of Castilla-La Mancha |
| Citations | 8 |
Abstract
Section titled āAbstractāBoron-doped diamond (BDD) electrodes are the most effective and resistant electrodic materials to perform advanced oxidation processes. Having a reactor that can provide adequate hydrodynamic conditions is mandatory to use these electrodes effectively. In this work, the diamond anode electrochemical reactor (E3L-DAER) is designed to fulfill this necessity. Several features are included to improve its efficiency, like conic inlet/outlet, flow enhancers, and a reduced interelectrode gap. The fluid dynamic validation has been performed using computer fluid dynamics (CFD) calculations, residence time distribution (RDT) curves, and mass transfer analysis. The reactor has been made using a three-dimensional (3D) printing stereolithography (SLA) technique, which allows us to build chemical-resistant reactors with nonstandard and tailored features in a cheap and fast way. The obtained results demonstrate that the designed reactor has the required fluid dynamics properties to perform reliable BDD electrode studies and applications. Finally, a BDD electrode was used to test the production of different oxidants such as persulfate, peroxophosphate, and chlorine-derived species.