| Metadata | Details |
|---|
| Publication Date | 2025-06-18 |
| Journal | Journal of Applied Physics |
| Authors | Jacqueline Fendt, M. Schreck |
| Institutions | University of Augsburg |
| Citations | 1 |
| Analysis | Full AI Review Included |
- Breakthrough in Dislocation Reduction: A novel, maskless epitaxial overgrowth technique achieves a minimum dislocation density (DD) of 1.7(±0.9) × 106 cm−2 in heteroepitaxial diamond quasi-substrates, a reduction of more than one order of magnitude from the initial state.
- Self-Organized 3D Patterning: The method bypasses the need for lithography or polishing by using a self-organized oxidation process to create large, high-aspect-ratio etch pits suitable for overgrowth.
- Key Process Innovation: Furnace-based thermal oxidation using moisturized synthetic air produces large h100i-oriented pits (facet angle ≈35°) with areas exceeding 10-4 cm2, controlled by an evolutionary selection mechanism similar to Ostwald ripening.
- Scalable & Robust: Unlike traditional Epitaxial Lateral Overgrowth (ELO) or Aspect Ratio Trapping (ART), this technique applies directly to as-grown surfaces, offering a simple, scalable pathway to higher-quality single-crystal diamond (SCD) wafers.
- Application Impact: Provides a viable route to reduce defect densities in heteroepitaxial diamond for next-generation wide-bandgap semiconductor devices, potentially replacing costly and size-limited homoepitaxial substrates.
| Parameter | Value | Unit | Context |
|---|
| Initial Dislocation Density (DD) | ≈107 | cm−2 | Typical for 1-2 mm thick heteroepitaxial quasi-substrates |
| Final DD (After Maskless ELO) | 1.7 (±0.9) × 106 | cm−2 | Lowest value achieved via one oxidation/overgrowth cycle |
| Plasma Etch Gas Mixture | 10% CO2 / H2 | - | MWPCVD setup, harsher than standard 5% CO2 |
| Plasma Etch Temperature | 920 | °C | 2.45-GHz MWPCVD reactor |
| Plasma Etch Rate | ≈6 | µm/h | Average material removal rate |
| Plasma Etch Pit Alignment | h110i | - | Inverted pyramid facets |
| Plasma Etch Pit Facet Angle | 33 ± 4 | ° | Close to (112) crystal planes |
| Furnace Oxidation Gas (Series #2) | Dry synthetic air | - | Ambient pressure, tube furnace |
| Furnace Oxidation Gas (Series #3) | Moisturized synthetic air | - | Passed through demineralized water bubbler |
| Furnace Oxidation Temperature | 700 - 900 | °C | Range explored for dry and moisturized conditions |
| Moisturized Air Etch Rate Factor | 1/7 to 1/8 | - | Reduction compared to dry air etching |
| Moisturized Air Pit Alignment | h100i | - | High facet angles achieved |
| Moisturized Air Pit Facet Angle | ≈35 | ° | Steep, smooth facets |
| Maximum Pit Area (Moisturized) | >10−4 | cm2 | Exceeds the >10−5 cm2 target threshold |
| Overgrowth Technique | MWPCVD | - | 2.45-GHz reactor, maskless lateral overgrowth |
| Target Pit Area for Overgrowth | >10−5 | cm2 | Equivalent to lateral dimensions >30 µm |
- Substrate Preparation: Heteroepitaxial diamond grown on Ir/YSZ/Si(001) multilayer substrates via Pulsed Laser Deposition (PLD), e-beam evaporation of Ir, and Bias Enhanced Nucleation (BEN) in a MWPCVD setup.
- Diamond Growth: Thick layers (1-2 mm) grown in a 915-MHz MWPCVD reactor using 8% CH4/H2 with 20-25 ppm N2.
- Sample Shaping: Substrates completely removed; 5 × 5 mm2 crystals prepared via laser cutting.
- Plasma Etching (Series #1): Performed in a 2.45-GHz MWPCVD setup using 10% CO2 in H2 at 920 °C and 160 mbar; step-by-step duration extended to 30 h.
- Thermal Oxidation (Series #2 & #3): Conducted in a tube furnace (up to 1300 °C) with constant flow of dry or moisturized synthetic air at ambient pressure; steep temperature ramps achieved by physically shifting the furnace.
- Characterization: Topography measured using a Keyence VK-X1000 confocal 3D laser scanning microscope (404 nm laser); high-resolution imaging via Scanning Electron Microscopy (SEM); etch rates derived from caliper thickness measurements and weight loss.
- Maskless Overgrowth: Patterned surfaces overgrown in the 2.45-GHz MWPCVD setup without the need for lithography or intermediate polishing steps.
- Applicable Materials:
- To replicate or build upon this research, Optical Grade Single Crystal Diamond (SCD) or custom-grown heteroepitaxial SCD plates are required. 6CCVD provides SCD with thicknesses ranging from 0.1 µm to 500 µm and substrates up to 10 mm, matching the dimensional needs for advanced semiconductor R&D.
- Customization Potential:
- The paper utilized laser cutting to shape 5 × 5 mm2 crystals from 1-2 mm thick layers. 6CCVD offers custom laser cutting and shaping services for SCD, PCD, and BDD materials.
- For subsequent device fabrication requiring metallization, 6CCVD provides in-house custom metallization using Au, Pt, Pd, Ti, W, and Cu, ensuring clean interfaces without contamination from external mask materials.
- Engineering Support:
- Achieving ultra-low dislocation densities (<106 cm−2) for high-power electronics and quantum applications requires precise material selection. 6CCVD’s in-house PhD engineering team can assist with material consultation, advising on the optimal diamond grade and growth parameters for projects involving maskless epitaxial overgrowth (ELO) or dislocation reduction.
- We can also provide heavy boron-doped diamond (BDD) or polycrystalline diamond (PCD) up to 125mm in diameter for scaled applications where single-crystal uniformity is less critical than cost and wafer size.
- Call to Action:
- For custom specifications, material consultation, or metallization inquiries, visit 6ccvd.com or contact our engineering team directly.
View Original Abstract
Reduction of the dislocation density (DD) in heteroepitaxial diamond quasi-substrates by maskless epitaxial overgrowth on 3D-patterned surfaces is reported. To create structures appropriate for maskless overgrowth, three different approaches were explored. First, CO2/H2 etching in a microwave plasma chemical vapor deposition setup was applied to generate dislocation induced pits. Even for high etch depths of 182 μm, pits with the shape of inverted pyramids aligned along ⟨110⟩ remained rather small (≈10−6 cm2). In the second approach, dry oxidation in a furnace using synthetic air provided structures of suitable size (&gt;10−5 cm2) but insufficient depth. Finally, moisturizing the feed gas reduced the etch velocity by a factor of ≈7, but also produced ⟨100⟩ oriented pits with both high facet angles of ≈35° and large areas of up to &gt;10−4 cm2. Subsequent maskless overgrowth resulted in a reduction of the initial DD by more than one order of magnitude down to 1.7 × 106 cm−2. Repetition of the etching/overgrowth sequence is expected to facilitate further improvement. The novel technique of self-organized 3D pattern formation is applicable to as-grown surfaces without the need for polishing and lithography. It provides a simple, robust, and scalable concept to improve the structural quality of diamond wafers.
- 2018 - Power Electronics Device Applications of Diamond Semiconductors
- 2017 - Ion bombardment induced buried lateral growth: The key mechanism for the synthesis of single crystal diamond wafers [Crossref]
- 1996 - Growth defects in GaN films on 6H-SiC substrates [Crossref]
- 1996 - Growth defects in GaN films on sapphire: The probable origin of threading dislocations [Crossref]
- 2009 - Low-temperature/high-temperature AlN superlattice buffer layers for high-quality AlxGa1−xN on Si (111) [Crossref]
- 2001 - Maskless epitaxial lateral overgrowth of GaN layers on structured Si(111) substrates, [Crossref]
- 2001 - Epitaxial lateral overgrowth techniques used in group III nitride epitaxy [Crossref]
- 2000 - Determination of tilt in the lateral epitaxial overgrowth of GaN using x-ray diffraction [Crossref]
- 2000 - Fabrication and characterization of low defect density GaN using facet-controlled epitaxial lateral overgrowth (FACELO) [Crossref]
- 2004 - Maskless lateral epitaxial overgrowth of high-aluminum content AlxGa1−xN [Crossref]