Skip to content

Thermal decomposition mechanism at diamond-silica interfaces induced by localised laser vitrification - experimental and ab-initio approach

MetadataDetails
Publication Date2025-11-01
JournalOpen Access CRIS of the University of Bern
AuthorsBogdanowicz, Robert, Pyrchla, Krzysztof, Ficek, Mateusz, Głowacki, Maciej J., Skiba, Franciszek
InstitutionsInstitute of Laser Physics, Laser Research Institute
AnalysisFull AI Review Included
  • Research Focus: Investigation of thermal decomposition mechanisms at silica-diamond interfaces induced by CO2 laser vitrification (λ = 10.6 µm) in vacuum for next-generation quantum optics and magnetically sensitive optical fibres.
  • Materials Compared: NV-rich nanodiamonds (NDNV, 180 nm, carboxyl-terminated) versus monocrystalline synthetic diamonds (MSY, 154 nm, undefined surface termination) embedded in fused silica matrices.
  • Key Finding: Surface chemistry dominates thermal stability—NDNV (COOH-terminated) exhibited onset of decomposition at 600°C, while MSY (untreated) degraded at 550°C, producing defect aggregates up to 10 µm in diameter.
  • Process Innovation: A “heat blade” (~4.5 mm high) with steep gradients (~100°C/mm) enables brief high-temperature exposure (>1500°C) while preserving NV centre luminescence at the characteristic 637 nm zero-phonon line.
  • Mechanistic Insight: Molecular dynamics (ReaxFF) revealed that amorphous silica catalyses CO2 release from carboxylated diamond surfaces, with decomposition temperatures of 876.85°C for [111] surfaces and 1176.85°C for [100] surfaces.
  • Composite Outcome: Successful vitrification produced optical-quality preforms with a 20% decrease in nonlinear refractive index at 1030 nm versus pure silica—demonstrating tunable Kerr nonlinearity for fibre optic applications.
  • Interface Characterisation: XPS revealed markedly different interfacial chemistry—C-Si bonding of 36% in MSY-SiO2 versus only 8% in NDNV-SiO2, confirming surface functionalisation as the critical engineering parameter.
ParameterValueUnitContext
Laser wavelength10.6µmCO2 laser vitrification source
Laser beam dimensions~9 mm height, ~20 mm widthmm1/e2 values of heat blade
Heat blade height~4.5mmUltra-thin localised heating zone
Temperature gradient~100°C/mmSteep gradient enabling rapid vitrification
Local vitrification temperature> 1500°CRequired for silica fusion
Processing atmosphere10-6 Torr (vacuum)—Prevents oxidation during processing
Silica tube dimensions4 mm OD, 1 mm wall, 200 mm lengthmmPreform containment
NDNV particle size180nmPrimary fraction (Adamas Nanotechnologies)
MSY particle size154nmPrimary fraction (Pureon AG)
Diamond concentration0.01 (mg ND/g silica)—10 ppm in both composite samples
NV zero-phonon line emission637nmConfirms NV centre preservation
NDNV decomposition onset600°CTGA-determined under oxidising conditions
MSY decomposition onset550°CTGA-determined under oxidising conditions
CO2 release threshold> 300°CMulti-step decomposition initiation
[111] diamond interface decomposition876.85 (1150 K)°CMD-ReaxFF simulation result
[100] diamond interface decomposition1176.85 (1450 K)°CMD-ReaxFF simulation result
Defect diameter (MSY sample)up to 10µmSEM-observed aggregates
Defect spacing (MSY sample)20-30µmAverage inter-defect distance
Macroscopic bubble diameters100-500µmHigh-power vitrification defects
C-Si bonding fraction (MSY-SiO2)36%XPS analysis
C-Si bonding fraction (NDNV-SiO2)8%XPS analysis
Unreacted SiO2 retention (NDNV-SiO2)~36%XPS analysis
Nonlinear refractive index change-20 (at 1030 nm)%Compared to pure silica glass
Diamond thermal conductivity (reference)up to 2000W/mKSingle crystal diamond bulk
Nanodiamond Debye temperature1577°CDemarcates graphitisation regimes
Carboxyl CO2 molecules at [100]3 per 6 nm2—Below interface disintegration
Carboxyl CO2 molecules at [111]5 per 10 nm2—Below interface disintegration
Max CO2 at [100] disintegration7 per 6 nm2—At 1350 K
Max CO2 at [111] disintegration22 per 6 nm2—At 1150 K
  • Particle Selection: Two HPHT-synthesised diamond grades—NDNV140nmHi (NV-implanted, acid-treated, COOH-terminated) from Adamas Nanotechnologies and MSY 0-0.25 µm (ball-milled, undefined surface) from Pureon AG.
  • Suspension Preparation: Dried aqueous NDNV suspension at 60°C under 0.1 MPa vacuum for 5 days, redispersed in ethanol at 1 mg/mL via 50 min pulsed ultrasonication (40% amplitude, Bandelin Sonopuls HD 4200).
  • DLS Verification: Hydrodynamic diameter confirmed on Zetasizer Nano ZS (λ = 632.8 nm, 173° backscatter) using ethanol parameters (η = 1.074 cP, n = 1.361) and diamond parameters (n = 2.42, k = 0.0).
  • Silica-Diamond Mixing: Fused silica granulate (LG PS 400, 50-200 µm, 99.99% purity) blended with diamond suspension in isopropyl alcohol, magnetically stirred at 500 RPM for 30 min.
  • Preform Loading: Blend packed into silica tubes (4 mm OD), dried overnight at 300°C under vacuum to remove moisture without exceeding the 600°C diamond weight-loss threshold.
  • Laser Vitrification: Custom-built lathe rotates and translates silica tube through a high-power CW CO2 laser beam; parameters optimised iteratively for optical clarity (no bubbles, agglomerates, or cracks).
  • Thermal Processing: Brief high-temperature exposure (>1500°C) with ~100°C/mm gradient enables vitrification while preserving diamond integrity.
  • Raman Spectroscopy: 785 nm and 532 nm excitation analysed characteristic diamond (1332 cm-1) and graphitic (D, G, 2D) bands across multiple sample regions.
  • TGA-MS Coupling: Decomposition products (CO2, CO, H2O) tracked via mass spectrometry during controlled heating to 1100°C.
  • XPS Surface Analysis: C 1s, Si 2p, and O 1s spectra quantified interfacial bonding states (C-C, C-O, C-Si, Si-O, Si-O-C).
  • SEM Imaging: Backscattered electron mode revealed defect distribution, agglomeration, and graphitisation contrast between samples.
  • MD Simulations (ReaxFF): Diamond (100) and (111) slabs with carboxyl terminations interfaced with amorphous SiO2; temperature ramped to track bond breaking, CO2 formation, and interface delamination in LAMMPS.
  • Applicable Materials:

    • Optical Grade SCD (Single Crystal Diamond) — for researchers requiring pristine [100] or [111] crystallographic orientations to replicate the facet-dependent thermal stability behaviour (876.85°C vs. 1176.85°C decomposition thresholds) documented in this study.
    • Heavy Boron Doped PCD (BDD) — for applications demanding enhanced electrical conductivity alongside thermal stability, available in custom plates up to 125 mm.
    • Sub-micron Diamond Powders — for photonic preform fabrication, available with controlled surface terminations (hydrogenated, carboxylated, or oxygen-functionalised) to match the NDNV vs. MSY interface chemistry comparison central to this work.
  • Customisation Potential:

    • Custom Dimensions: Diamond plates and wafers available up to 125 mm diameter (PCD) with thicknesses from 0.1 µm to 500 µm (SCD/PCD) and substrates up to 10 mm thick.
    • Surface Engineering: Tailored surface termination (H-terminated, COOH-terminated, oxygen-functionalised) to suppress graphitisation during high-temperature silica integration—directly addressing the paper’s finding that carboxyl groups enhance structural stability at the silica interface.
    • Metalization Capabilities: In-house Ti, Pt, Au, Pd, W, and Cu deposition for electrode integration in optomagnetometric fibre assemblies or quantum photonic interfaces.
    • Laser Cutting & Dicing: Precision shaping of preform-compatible diamond geometries (including the sub-200 nm particle fractions studied here) for hybrid glass-diamond composite fabrication.
    • Surface Finishing: Ultra-low roughness polishing (Ra < 1 nm for SCD, Ra < 5 nm for inch-size PCD) ensures minimal scattering losses when embedding diamond in optical-quality silica matrices.
  • Engineering Support:

    • 6CCVD’s in-house PhD engineering team provides direct material consultation for projects targeting quantum sensing fibres, NV-diamond optomagnetometry, and nonlinear photonic preforms.
    • We can assist in selecting the optimal diamond grade (SCD vs. PCD vs. BDD), surface chemistry, and geometric specification to balance the trade-off identified in this study between optical transparency (favours smaller particles, < 180 nm) and thermal/mechanical performance (favours larger particles, > 1 µm).
    • For projects requiring interface stability above 1000°C, our team can advise on crystallographic orientation selection (favouring [100] surfaces per the paper’s 300°C stability advantage) and protective metallisation strategies to prevent the CO2-driven delamination mechanism characterised here.
  • Call to Action: For custom specifications, surface-engineered diamond materials, or material consultation for your silica-diamond composite or quantum photonic fibre project, visit 6ccvd.com or contact our engineering team directly.

View Original Abstract

This study investigates the thermal decomposition mechanisms at silica-diamond interfaces following localised laser vitrification, combining experimental analysis with molecular dynamics simulations. Two types of diamond particles were analysed: nitrogen vacancy (NV)-rich nanodiamonds (180 nm) and monocrystalline synthetic diamonds (154 nm). The samples were fabricated using vacuum-based CO2 laser vitrification at a wavelength of 10.6 μm, designed to overcome the processing temperature mismatch between diamond and silica. Scanning electron microscopy revealed distinct interface regions with localised defects measuring up to 10 μm in diameter in monocrystalline diamond samples. Raman spectroscopy and fluorescence analysis demonstrated a different decomposition for each diamond type, with NV-rich nanodiamonds exhibiting characteristic NV centre emission at 637 nm. Thermogravimetric analysis coupled with mass spectrometry identified a multi-step decomposition process, with CO2 release occurring above 300 °C and distinct thermal degradation temperatures depending on the diamond type. Molecular dynamics simulations using the Reax Force Field method elucidated the interface dynamics, revealing that amorphous silica accelerates CO2 release from carboxyl-functionalised diamond surfaces. These findings provide key insights into thermal decomposition at silica-diamond interfaces, contributing to the development of hybrid materials for quantum optics, particularly in low-loss magnetically sensitive optical fibres used in optomagnetometry.